4 Stage 6000PSI PCP Air Tank High Pressure Hand Pump Hunting Scuba Diving Oxygen

4 Stage 6000PSI PCP Air Tank High Pressure Hand Pump Hunting Scuba Diving Oxygen
4 Stage 6000PSI PCP Air Tank High Pressure Hand Pump Hunting Scuba Diving Oxygen
4 Stage 6000PSI PCP Air Tank High Pressure Hand Pump Hunting Scuba Diving Oxygen
4 Stage 6000PSI PCP Air Tank High Pressure Hand Pump Hunting Scuba Diving Oxygen
4 Stage 6000PSI PCP Air Tank High Pressure Hand Pump Hunting Scuba Diving Oxygen
4 Stage 6000PSI PCP Air Tank High Pressure Hand Pump Hunting Scuba Diving Oxygen
4 Stage 6000PSI PCP Air Tank High Pressure Hand Pump Hunting Scuba Diving Oxygen
4 Stage 6000PSI PCP Air Tank High Pressure Hand Pump Hunting Scuba Diving Oxygen
4 Stage 6000PSI PCP Air Tank High Pressure Hand Pump Hunting Scuba Diving Oxygen
4 Stage 6000PSI PCP Air Tank High Pressure Hand Pump Hunting Scuba Diving Oxygen
4 Stage 6000PSI PCP Air Tank High Pressure Hand Pump Hunting Scuba Diving Oxygen
4 Stage 6000PSI PCP Air Tank High Pressure Hand Pump Hunting Scuba Diving Oxygen

4 Stage 6000PSI PCP Air Tank High Pressure Hand Pump Hunting Scuba Diving Oxygen
4 Stage 6000PSI PCP Air Tank High Pressure Hand Pump Hunting Scuba Diving Oxygen. Made of high quality stainless steel, anti-rust and durable for long lasting. High pressure air pump by hand, with oil-water separator, compress dry and clean air into oxygen cylinder. With ergonomic design, easy to pump, convenient to operate, time-saving and labor-saving. With a pressure gauge on it, you can know when to stop inflating. Come with practical accessory for quick and easy use. Tighten the pressure relief screw before pumping up (tighten clockwise); loosen the pressure relief screw after pumping up (tighten counterclockwise). Non-explosive tube: it’s made of imported material, and with its 63MPA pressure resistant design, it is not easy to brittle in the condition of the temperature of -30°. Oil-water separator: make the gas more pure. It takes about 15 to 20 minutes to fill a 0.5L oxygen cylinder about pumping up 600 times. How to use: Please perform the pump test according to the instructions and follow the steps to pump. Working pressure: 0-40MPA (0-6000PSi). Connector type: 8MM female. Air Tube Length: Approx. 53cm / 20.9in. Connector Diameter: 3.1cm / 1.2in. Connector Length: 9.9cm / 3.9 in. Package Size: 64x 17.5 x 6 cm/ 25.19 x 6.88 x 2.36inch. 3340g/ 117.81 oz. 1 x High-pressure air pump. 3 Pack x Accessories. Cylindrical filter, sponge filter, hexagonal tool, test plug, car connector. Pump base, first-stage piston O-ring, third-stage piston, piston bead, piston head, gasket, activated carbon filter. The high-pressure air pump is a backup air source. Only as a last resort should you use it. Before use, please perform the inflation test according to the instructions and refer to the relevant steps to inflate. 0.5L oxygen cylinder requires about 600 pumps. After testing, Only two adult men take turns pumping for 15-20 minutes, can the oxygen cylinder be filled up. The pumping efficiency is increased by 20%. 24 pumps = 1MPA, so you can lose weight during pumping. During the pumping process, the high-pressure pump generates heat due to friction, so it is normal for the tube to heat up, but be careful with this condition. If you encounter any trouble. Please give us an opportunity to resolve any problems. We understand the concerns and frustrations you might have and we will try our best to service for you. We care about our valued customers and want to build a long-term business relationship with you, so please help us to make better. The item “4 Stage 6000PSI PCP Air Tank High Pressure Hand Pump Hunting Scuba Diving Oxygen” is in sale since Wednesday, August 5, 2020. This item is in the category “Sporting Goods\Scuba & Snorkelling\Cylinders & Tanks”. The seller is “bloomyield_inc” and is located in ShenZhen. This item can be shipped to all countries in Europe, all countries in continental Asia, Canada.
  • Air Tube Length: Approx. 53cm / 20.9in
  • Brand: Unbranded
  • Connector Diameter: 3.1cm / 1.2in
  • Connector Length:: 9.9cm / 3.9in
  • Connector type: 8MM female
  • Country/Region of Manufacture: China
  • Custom Bundle: No
  • Material: Stainless Steel
  • Modified Item: No
  • MPN: Does Not Apply
  • Package Size: 64×17.5×6 cm/25.19×6.88×2.36inch
  • Package Weight: Approx. 3340g/117.81oz
  • Working pressure: 0-40MPA (0-6000PSi)

4 Stage 6000PSI PCP Air Tank High Pressure Hand Pump Hunting Scuba Diving Oxygen

6000PSI 4 Stage PCP Airgun Rifle High Pressure Hand Pump Oxygen Air Tank Refill

6000PSI 4 Stage PCP Airgun Rifle High Pressure Hand Pump Oxygen Air Tank Refill
6000PSI 4 Stage PCP Airgun Rifle High Pressure Hand Pump Oxygen Air Tank Refill
6000PSI 4 Stage PCP Airgun Rifle High Pressure Hand Pump Oxygen Air Tank Refill
6000PSI 4 Stage PCP Airgun Rifle High Pressure Hand Pump Oxygen Air Tank Refill
6000PSI 4 Stage PCP Airgun Rifle High Pressure Hand Pump Oxygen Air Tank Refill
6000PSI 4 Stage PCP Airgun Rifle High Pressure Hand Pump Oxygen Air Tank Refill
6000PSI 4 Stage PCP Airgun Rifle High Pressure Hand Pump Oxygen Air Tank Refill
6000PSI 4 Stage PCP Airgun Rifle High Pressure Hand Pump Oxygen Air Tank Refill
6000PSI 4 Stage PCP Airgun Rifle High Pressure Hand Pump Oxygen Air Tank Refill
6000PSI 4 Stage PCP Airgun Rifle High Pressure Hand Pump Oxygen Air Tank Refill
6000PSI 4 Stage PCP Airgun Rifle High Pressure Hand Pump Oxygen Air Tank Refill

6000PSI 4 Stage PCP Airgun Rifle High Pressure Hand Pump Oxygen Air Tank Refill
6000PSI 4 Stage PCP Airgun Rifle High Pressure Hand Pump Oxygen Air Tank Refill. Made of high quality stainless steel, anti-rust and durable for long lasting. High pressure air pump by hand, with oil-water separator, compress dry and clean air into oxygen cylinder. With ergonomic design, easy to pump, convenient to operate, time-saving and labor-saving. With a pressure gauge on it, you can know when to stop inflating. Come with practical accessory for quick and easy use. Tighten the pressure relief screw before pumping up (tighten clockwise); loosen the pressure relief screw after pumping up (tighten counterclockwise). Non-explosive tube: it’s made of imported material, and with its 63MPA pressure resistant design, it is not easy to brittle in the condition of the temperature of -30°. Oil-water separator: make the gas more pure. It takes about 15 to 20 minutes to fill a 0.5L oxygen cylinder about pumping up 600 times. How to use: Please perform the pump test according to the instructions and follow the steps to pump. Working pressure: 0-40MPA (0-6000PSi). Connector type: 8MM female. Air Tube Length: Approx. 53cm / 20.9in. Connector Diameter: 3.1cm / 1.2in. Connector Length: 9.9cm / 3.9 in. Package Size: 64x 17.5 x 6 cm/ 25.19 x 6.88 x 2.36inch. 3340g/ 117.81 oz. 1 x High-pressure air pump. 3 Pack x Accessories. Cylindrical filter, sponge filter, hexagonal tool, test plug, car connector. Pump base, first-stage piston O-ring, third-stage piston, piston bead, piston head, gasket, activated carbon filter. The high-pressure air pump is a backup air source. Only as a last resort should you use it. Before use, please perform the inflation test according to the instructions and refer to the relevant steps to inflate. 0.5L oxygen cylinder requires about 600 pumps. After testing, Only two adult men take turns pumping for 15-20 minutes, can the oxygen cylinder be filled up. The pumping efficiency is increased by 20%. 24 pumps = 1MPA, so you can lose weight during pumping. During the pumping process, the high-pressure pump generates heat due to friction, so it is normal for the tube to heat up, but be careful with this condition. If you encounter any trouble. Please give us an opportunity to resolve any problems. We understand the concerns and frustrations you might have and we will try our best to service for you. We care about our valued customers and want to build a long-term business relationship with you, so please help us to make better. Welcome to our store! If you were not satisfied when you have received the item(s), please return it/them. Please contact me before you return it;If you do not receive the itemwe offer a. If you are willing return item back to us, please keep it in original package. We value your feedback so we will endeavor to respond to all inquiries. & Public holiday excluded. We would like to earn your. Your action will help us offer our milk and bread. The item “6000PSI 4 Stage PCP Airgun Rifle High Pressure Hand Pump Oxygen Air Tank Refill” is in sale since Thursday, September 17, 2020. This item is in the category “Sporting Goods\Water Sports\Scuba & Snorkeling\Tanks”. The seller is “hsw-winer” and is located in ShenZhen. This item can be shipped to United States, all countries in continental Asia, Canada, Mexico.
  • Air Tube Length: Approx. 53cm / 20.9in
  • Brand: Unbranded
  • Connector Diameter: 3.1cm / 1.2in
  • Connector Length:: 9.9cm / 3.9in
  • Connector type: 8MM female
  • Country/Region of Manufacture: China
  • Custom Bundle: No
  • Main Function: The pumping efficiency is increased by 20%
  • Material: Stainless Steel
  • Model: High-pressure air pump
  • Modified Item: No
  • MPN: Does Not Apply
  • Package Size: 64×17.5×6 cm/25.19×6.88×2.36inch
  • Package Weight: Approx. 3340g/117.81oz
  • Stage: 4 Stage
  • Working pressure: 0-40MPA (0-6000PSi)

6000PSI 4 Stage PCP Airgun Rifle High Pressure Hand Pump Oxygen Air Tank Refill

4 Stage 6000PSI PCP Air Gun Rifle Filling Stirrup Hand Pump High Pressure Gauge

4 Stage 6000PSI PCP Air Gun Rifle Filling Stirrup Hand Pump High Pressure Gauge
4 Stage 6000PSI PCP Air Gun Rifle Filling Stirrup Hand Pump High Pressure Gauge
4 Stage 6000PSI PCP Air Gun Rifle Filling Stirrup Hand Pump High Pressure Gauge
4 Stage 6000PSI PCP Air Gun Rifle Filling Stirrup Hand Pump High Pressure Gauge
4 Stage 6000PSI PCP Air Gun Rifle Filling Stirrup Hand Pump High Pressure Gauge
4 Stage 6000PSI PCP Air Gun Rifle Filling Stirrup Hand Pump High Pressure Gauge
4 Stage 6000PSI PCP Air Gun Rifle Filling Stirrup Hand Pump High Pressure Gauge
4 Stage 6000PSI PCP Air Gun Rifle Filling Stirrup Hand Pump High Pressure Gauge
4 Stage 6000PSI PCP Air Gun Rifle Filling Stirrup Hand Pump High Pressure Gauge
4 Stage 6000PSI PCP Air Gun Rifle Filling Stirrup Hand Pump High Pressure Gauge
4 Stage 6000PSI PCP Air Gun Rifle Filling Stirrup Hand Pump High Pressure Gauge
4 Stage 6000PSI PCP Air Gun Rifle Filling Stirrup Hand Pump High Pressure Gauge

4 Stage 6000PSI PCP Air Gun Rifle Filling Stirrup Hand Pump High Pressure Gauge
4 Stage 6000PSI PCP Air Gun Rifle Filling Stirrup Hand Pump High Pressure Gauge. The pumping efficiency is increased by 20%. Made of high quality stainless steel, anti-rust and durable for long lasting. High pressure air pump by hand, with oil-water separator, compress dry and clean air into oxygen cylinder. With ergonomic design, easy to pump, convenient to operate, time-saving and labor-saving. With a pressure gauge on it, you can know when to stop inflating. Come with practical accessory for quick and easy use. Tighten the pressure relief screw before pumping up (tighten clockwise); loosen the pressure relief screw after pumping up (tighten counterclockwise). Non-explosive tube: it’s made of imported material, and with its 63MPA pressure resistant design, it is not easy to brittle in the condition of the temperature of -30°. Oil-water separator: make the gas more pure. It takes about 15 to 20 minutes to fill a 0.5L oxygen cylinder about pumping up 600 times. How to use: Please perform the pump test according to the instructions and follow the steps to pump. Working pressure: 0-40MPA (0-6000PSi). Connector type: 8MM female. Air Tube Length: Approx. 53cm / 20.9in. Connector Diameter: 3.1cm / 1.2in. Connector Length: 9.9cm / 3.9 in. Package Size: 64x 17.5 x 6 cm/ 25.19 x 6.88 x 2.36inch. 3340g/ 117.81 oz. 1 x High-pressure air pump. 3 Pack x Accessories. Cylindrical filter, sponge filter, hexagonal tool, test plug, car connector. Pump base, first-stage piston O-ring, third-stage piston, piston bead, piston head, gasket, activated carbon filter. The high-pressure air pump is a backup air source. Only as a last resort should you use it. Before use, please perform the inflation test according to the instructions and refer to the relevant steps to inflate. 0.5L oxygen cylinder requires about 600 pumps. After testing, Only two adult men take turns pumping for 15-20 minutes, can the oxygen cylinder be filled up. 24 pumps = 1MPA, so you can lose weight during pumping. During the pumping process, the high-pressure pump generates heat due to friction, so it is normal for the tube to heat up, but be careful with this condition. If you have any inquiry regarding the item or our service, We will try to reply any message within 24 working hours. Emails may not be monitored quickly. & Public holiday excluded. The item “4 Stage 6000PSI PCP Air Gun Rifle Filling Stirrup Hand Pump High Pressure Gauge” is in sale since Saturday, August 15, 2020. This item is in the category “Sporting Goods\Outdoor Sports\Air Guns & Slingshots\Accessories”. The seller is “dst_tim” and is located in ShenZhen. This item can be shipped to United States, all countries in continental Asia, Canada, Mexico.
  • Air Tube Length: Approx. 53cm/20.9in
  • Brand: Unbranded
  • Come with Practical Accessory: For You to Quick & Easy Use
  • Connector Diameter: 3.1cm/1.2in
  • Connector Length: 9.9cm/3.9 in
  • Connector Type: 8MM Female
  • Made of High Quality Stainless Steel: Anti-Rust and Durable for Long Lasting
  • Material: Stainless Steel
  • Model: Four Stage Upgraded PCP Hand Pump
  • MPN: Does Not Apply
  • Non-Explosive Tube: Imported Material, 63MPA Pressure Resistant Design
  • Note: Air Tank is Not Included
  • Theory: Reciprocating Pump
  • Type: PCP Adapter
  • Upgraded Function: The Pumping Efficiency is Increased by 20% Compare to Normal One
  • Warm Note: Please Check the Connector Size Before Order
  • With a Pressure Gauge on it: You Can Know When to Stop Inflating
  • With Ergonomic Design: Easy to Pump,Convenient to Operate,Time-saving and Labor-Saving
  • With Oil-Water Separator: Make The Gas More ure
  • Working Pressure: 0-40MPA (0-6000PSi)

4 Stage 6000PSI PCP Air Gun Rifle Filling Stirrup Hand Pump High Pressure Gauge

6000PSI 4 Stage PCP Airgun Rifle High Pressure Hand Pump Oxygen Air Tank Refill

6000PSI 4 Stage PCP Airgun Rifle High Pressure Hand Pump Oxygen Air Tank Refill
6000PSI 4 Stage PCP Airgun Rifle High Pressure Hand Pump Oxygen Air Tank Refill
6000PSI 4 Stage PCP Airgun Rifle High Pressure Hand Pump Oxygen Air Tank Refill
6000PSI 4 Stage PCP Airgun Rifle High Pressure Hand Pump Oxygen Air Tank Refill
6000PSI 4 Stage PCP Airgun Rifle High Pressure Hand Pump Oxygen Air Tank Refill
6000PSI 4 Stage PCP Airgun Rifle High Pressure Hand Pump Oxygen Air Tank Refill
6000PSI 4 Stage PCP Airgun Rifle High Pressure Hand Pump Oxygen Air Tank Refill
6000PSI 4 Stage PCP Airgun Rifle High Pressure Hand Pump Oxygen Air Tank Refill
6000PSI 4 Stage PCP Airgun Rifle High Pressure Hand Pump Oxygen Air Tank Refill
6000PSI 4 Stage PCP Airgun Rifle High Pressure Hand Pump Oxygen Air Tank Refill
6000PSI 4 Stage PCP Airgun Rifle High Pressure Hand Pump Oxygen Air Tank Refill
6000PSI 4 Stage PCP Airgun Rifle High Pressure Hand Pump Oxygen Air Tank Refill

6000PSI 4 Stage PCP Airgun Rifle High Pressure Hand Pump Oxygen Air Tank Refill
Made of high quality stainless steel, anti-rust and durable for long lasting. High pressure air pump by hand, with oil-water separator, compress dry and clean air into oxygen cylinder. With ergonomic design, easy to pump, convenient to operate, time-saving and labor-saving. With a pressure gauge on it, you can know when to stop inflating. Come with practical accessory for quick and easy use. Tighten the pressure relief screw before pumping up (tighten clockwise); loosen the pressure relief screw after pumping up (tighten counterclockwise). Non-explosive tube: it’s made of imported material, and with its 63MPA pressure resistant design, it is not easy to brittle in the condition of the temperature of -30°. Oil-water separator: make the gas more pure. It takes about 15 to 20 minutes to fill a 0.5L oxygen cylinder about pumping up 600 times. How to use: Please perform the pump test according to the instructions and follow the steps to pump. Working pressure: 0-40MPA (0-6000PSi). Connector type: 8MM female. Air Tube Length: Approx. 53cm / 20.9in. Connector Diameter: 3.1cm / 1.2in. Connector Length: 9.9cm / 3.9 in. Package Size: 64x 17.5 x 6 cm/ 25.19 x 6.88 x 2.36inch. 3340g/ 117.81 oz. 1 x High-pressure air pump. 3 Pack x Accessories. Cylindrical filter, sponge filter, hexagonal tool, test plug, car connector. Pump base, first-stage piston O-ring, third-stage piston, piston bead, piston head, gasket, activated carbon filter. The high-pressure air pump is a backup air source. Only as a last resort should you use it. Before use, please perform the inflation test according to the instructions and refer to the relevant steps to inflate. 0.5L oxygen cylinder requires about 600 pumps. After testing, Only two adult men take turns pumping for 15-20 minutes, can the oxygen cylinder be filled up. The pumping efficiency is increased by 20%. 24 pumps = 1MPA, so you can lose weight during pumping. During the pumping process, the high-pressure pump generates heat due to friction, so it is normal for the tube to heat up, but be careful with this condition. We will respond and solve your issue ASAP. Our goal is to provide excellent before and after sales services to all our customers. (except weekends and holidays). The item “6000PSI 4 Stage PCP Airgun Rifle High Pressure Hand Pump Oxygen Air Tank Refill” is in sale since Friday, September 4, 2020. This item is in the category “Sporting Goods\Water Sports\Scuba & Snorkeling\Tanks”. The seller is “beyond_new” and is located in ShenZhen. This item can be shipped to United States, all countries in continental Asia, Canada, Mexico.
  • Air Tube Length: Approx. 53cm / 20.9in
  • Brand: Unbranded
  • Connector Diameter: 3.1cm / 1.2in
  • Connector Length:: 9.9cm / 3.9in
  • Connector type: 8MM female
  • Country/Region of Manufacture: China
  • Custom Bundle: No
  • Main Function: The pumping efficiency is increased by 20%
  • Material: Stainless Steel
  • Model: High-pressure air pump
  • Modified Item: No
  • MPN: Does Not Apply
  • Package Size: 64×17.5×6 cm/25.19×6.88×2.36inch
  • Package Weight: Approx. 3340g/117.81oz
  • Stage: 4 Stage
  • Working pressure: 0-40MPA (0-6000PSi)

6000PSI 4 Stage PCP Airgun Rifle High Pressure Hand Pump Oxygen Air Tank Refill

6000PSI 4 Stage High Pressure PCP Hand Pump Gauge Air Tank Rifle Filling Stirrup

6000PSI 4 Stage High Pressure PCP Hand Pump Gauge Air Tank Rifle Filling Stirrup
6000PSI 4 Stage High Pressure PCP Hand Pump Gauge Air Tank Rifle Filling Stirrup
6000PSI 4 Stage High Pressure PCP Hand Pump Gauge Air Tank Rifle Filling Stirrup
6000PSI 4 Stage High Pressure PCP Hand Pump Gauge Air Tank Rifle Filling Stirrup
6000PSI 4 Stage High Pressure PCP Hand Pump Gauge Air Tank Rifle Filling Stirrup
6000PSI 4 Stage High Pressure PCP Hand Pump Gauge Air Tank Rifle Filling Stirrup
6000PSI 4 Stage High Pressure PCP Hand Pump Gauge Air Tank Rifle Filling Stirrup
6000PSI 4 Stage High Pressure PCP Hand Pump Gauge Air Tank Rifle Filling Stirrup
6000PSI 4 Stage High Pressure PCP Hand Pump Gauge Air Tank Rifle Filling Stirrup
6000PSI 4 Stage High Pressure PCP Hand Pump Gauge Air Tank Rifle Filling Stirrup
6000PSI 4 Stage High Pressure PCP Hand Pump Gauge Air Tank Rifle Filling Stirrup
6000PSI 4 Stage High Pressure PCP Hand Pump Gauge Air Tank Rifle Filling Stirrup

6000PSI 4 Stage High Pressure PCP Hand Pump Gauge Air Tank Rifle Filling Stirrup
100% New & Excellent Quality. High Pressure Hand Pump. 1 x High-pressure air pump. 3 Pack x Accessories. Cylindrical filter, sponge filter, hexagonal tool, test plug, car connector. Pump base, first-stage piston O-ring, third-stage piston, piston bead, piston head, gasket, activated carbon filter. Made of high quality stainless steel, anti-rust and durable for long lasting. High pressure air pump by hand, with oil-water separator, compress dry and clean air into oxygen cylinder. With ergonomic design, easy to pump, convenient to operate, time-saving and labor-saving. With a pressure gauge on it, you can know when to stop inflating. Come with practical accessory for quick and easy use. Tighten the pressure relief screw before pumping up (tighten clockwise); loosen the pressure relief screw after pumping up (tighten counterclockwise). Non-explosive tube: it’s made of imported material, and with its 63MPA pressure resistant design, it is not easy to brittle in the condition of the temperature of -30°. Oil-water separator: make the gas more pure. It takes about 15 to 20 minutes to fill a 0.5L oxygen cylinder about pumping up 600 times. How to use: Please perform the pump test according to the instructions and follow the steps to pump. Working pressure: 0-40MPA (0-6000PSi). Connector type: 8MM female. Air Tube Length: Approx. 53cm / 20.9in. Connector Diameter: 3.1cm / 1.2in. Connector Length: 9.9cm / 3.9 in. Package Size: 64x 17.5 x 6 cm/ 25.19 x 6.88 x 2.36inch. 3340g/ 117.81 oz. The high-pressure air pump is a backup air source. Only as a last resort should you use it. Before use, please perform the inflation test according to the instructions and refer to the relevant steps to inflate. 0.5L oxygen cylinder requires about 600 pumps. After testing, Only two adult men take turns pumping for 15-20 minutes, can the oxygen cylinder be filled up. The pumping efficiency is increased by 20%. 24 pumps = 1MPA, so you can lose weight during pumping. During the pumping process, the high-pressure pump generates heat due to friction, so it is normal for the tube to heat up, but be careful with this condition. Top grade material. Made of high-quality aluminum alloy, features high hardness and long-lasting performance. More precise connector thread, 8mm quick-connect female connector, fast install the oil-water separator in seconds. Built-in black rubber o-ring, make sure the tightness when pumping. (Please replace the broken o-ring). Double filter of the activated carbon filter. Oil absorption, water absorption, impurities adsorption. Purer & more reliable. The surface finished with non-slip texture, features comfortable touch. Material: 7075 Aviation aluminum. Weight: about 998g/2.2 pounds. Application: PCP air compressor, scuba diving tank compressor, electric air pump, etc. Sleeve size (L x D): approx. 27 x 5.1cm/10.63 x 2.01 inch. Filter cartridge size (L x D): approx. 18 x 2.8cm/7.09 x 1.10 inch. Female connector diameter: 8mm. If you encounter any trouble. Please give us an opportunity to resolve any problems. We understand the concerns and frustrations you might have and we will try our best to service for you. We care about our valued customers and want to build a long-term business relationship with you, so please help us to make better. If you were not satisfied when you have received the item(s), please return it/them. Please contact me before you return it;If you do not receive the itemwe offer a. If you are willing return item back to us, please keep it in original package. We value your feedback so we will endeavor to respond to all inquiries. & Public holiday excluded. We would like to earn your. Your action will help us offer our milk and bread. The item “6000PSI 4 Stage High Pressure PCP Hand Pump Gauge Air Tank Rifle Filling Stirrup” is in sale since Wednesday, August 26, 2020. This item is in the category “Sporting Goods\Outdoor Sports\Air Guns & Slingshots\Accessories”. The seller is “sunlight_vp” and is located in ShenZhen. This item can be shipped to United States, all countries in continental Asia, Canada, Mexico.
  • Air Tube Length: Approx. 53cm / 20.9in
  • Brand: Unbranded
  • Connector Diameter: 3.1cm / 1.2in
  • Connector Length: 9.9cm / 3.9in
  • Connector type: 8MM female
  • Country/Region of Manufacture: China
  • Custom Bundle: No
  • Main Function: The pumping efficiency is increased by 20%
  • Material: Stainless Steel
  • Model: High-pressure air pump
  • Modified Item: No
  • MPN: Does Not Apply
  • Package Size: 64×17.5×6 cm/25.19×6.88×2.36inch

6000PSI 4 Stage High Pressure PCP Hand Pump Gauge Air Tank Rifle Filling Stirrup

6000PSI 63MPA PCP Air Gun Rifle Filling Stirrup High Pressure Hand Pump with Gauge

6000PSI 63MPA PCP Air Gun Rifle Filling Stirrup High Pressure Hand Pump with Gauge
6000PSI 63MPA PCP Air Gun Rifle Filling Stirrup High Pressure Hand Pump with Gauge
6000PSI 63MPA PCP Air Gun Rifle Filling Stirrup High Pressure Hand Pump with Gauge
6000PSI 63MPA PCP Air Gun Rifle Filling Stirrup High Pressure Hand Pump with Gauge
6000PSI 63MPA PCP Air Gun Rifle Filling Stirrup High Pressure Hand Pump with Gauge
6000PSI 63MPA PCP Air Gun Rifle Filling Stirrup High Pressure Hand Pump with Gauge
6000PSI 63MPA PCP Air Gun Rifle Filling Stirrup High Pressure Hand Pump with Gauge
6000PSI 63MPA PCP Air Gun Rifle Filling Stirrup High Pressure Hand Pump with Gauge
6000PSI 63MPA PCP Air Gun Rifle Filling Stirrup High Pressure Hand Pump with Gauge
6000PSI 63MPA PCP Air Gun Rifle Filling Stirrup High Pressure Hand Pump with Gauge
6000PSI 63MPA PCP Air Gun Rifle Filling Stirrup High Pressure Hand Pump with Gauge

6000PSI 63MPA PCP Air Gun Rifle Filling Stirrup High Pressure Hand Pump with Gauge
100% New & Excellent Quality. Made of high quality stainless steel, anti-rust and durable for long lasting. High pressure air pump by hand, with oil-water separator, compress dry and clean air into oxygen cylinder. With ergonomic design, easy to pump, convenient to operate, time-saving and labor-saving. With a pressure gauge on it, you can know when to stop inflating. Come with practical accessory for quick and easy use. Tighten the pressure relief screw before pumping up (tighten clockwise); loosen the pressure relief screw after pumping up (tighten counterclockwise). Non-explosive tube: it’s made of imported material, and with its 63MPA pressure resistant design, it is not easy to brittle in the condition of the temperature of -30°. Oil-water separator: make the gas more pure. It takes about 15 to 20 minutes to fill a 0.5L oxygen cylinder about pumping up 600 times. How to use: Please perform the pump test according to the instructions and follow the steps to pump. Working pressure: 0-40MPA (0-6000PSi). Connector type: 8MM female. Air Tube Length: Approx. 53cm / 20.9in. Connector Diameter: 3.1cm / 1.2in. Connector Length: 9.9cm / 3.9 in. Package Size: 64x 17.5 x 6 cm/ 25.19 x 6.88 x 2.36inch. 3340g/ 117.81 oz. 1 x High-pressure air pump. 3 Pack x Accessories. Cylindrical filter, sponge filter, hexagonal tool, test plug, car connector. Pump base, first-stage piston O-ring, third-stage piston, piston bead, piston head, gasket, activated carbon filter. The high-pressure air pump is a backup air source. Only as a last resort should you use it. Before use, please perform the inflation test according to the instructions and refer to the relevant steps to inflate. 0.5L oxygen cylinder requires about 600 pumps. After testing, Only two adult men take turns pumping for 15-20 minutes, can the oxygen cylinder be filled up. The pumping efficiency is increased by 20%. 24 pumps = 1MPA, so you can lose weight during pumping. During the pumping process, the high-pressure pump generates heat due to friction, so it is normal for the tube to heat up, but be careful with this condition. If you encounter any trouble. Please give us an opportunity to resolve any problems. We understand the concerns and frustrations you might have and we will try our best to service for you. We care about our valued customers and want to build a long-term business relationship with you, so please help us to make better. If you were not satisfied when you have received the item(s), please return it/them. Please contact me before you return it;If you do not receive the itemwe offer a. If you are willing return item back to us, please keep it in original package. We value your feedback so we will endeavor to respond to all inquiries. & Public holiday excluded. We would like to earn your. Your action will help us offer our milk and bread. The item “6000PSI 63MPA PCP Air Gun Rifle Filling Stirrup High Pressure Hand Pump with Gauge” is in sale since Sunday, August 16, 2020. This item is in the category “Sporting Goods\Water Sports\Scuba & Snorkeling\Tanks”. The seller is “noble_coo” and is located in ShenZhen. This item can be shipped to United States, all countries in continental Asia, Canada, Mexico.
  • Air Tube Length: Approx. 53cm / 20.9in
  • Brand: Unbranded
  • Connector Diameter: 3.1cm / 1.2in
  • Connector Length:: 9.9cm / 3.9in
  • Connector type: 8MM female
  • Country/Region of Manufacture: China
  • Custom Bundle: No
  • Main Function: The pumping efficiency is increased by 20%
  • Material: Stainless Steel
  • Model: High-pressure air pump
  • Modified Item: No
  • MPN: Does Not Apply
  • Package Size: 64×17.5×6 cm/25.19×6.88×2.36inch
  • Package Weight: Approx. 3340g/117.81oz
  • Stage: 4 Stage
  • Working pressure: 0-40MPA (0-6000PSi)

6000PSI 63MPA PCP Air Gun Rifle Filling Stirrup High Pressure Hand Pump with Gauge

4 Stage 6000PSI PCP Air Tank High Pressure Hand Pump Hunting Scuba Diving Oxygen

4 Stage 6000PSI PCP Air Tank High Pressure Hand Pump Hunting Scuba Diving Oxygen
4 Stage 6000PSI PCP Air Tank High Pressure Hand Pump Hunting Scuba Diving Oxygen
4 Stage 6000PSI PCP Air Tank High Pressure Hand Pump Hunting Scuba Diving Oxygen
4 Stage 6000PSI PCP Air Tank High Pressure Hand Pump Hunting Scuba Diving Oxygen
4 Stage 6000PSI PCP Air Tank High Pressure Hand Pump Hunting Scuba Diving Oxygen
4 Stage 6000PSI PCP Air Tank High Pressure Hand Pump Hunting Scuba Diving Oxygen
4 Stage 6000PSI PCP Air Tank High Pressure Hand Pump Hunting Scuba Diving Oxygen
4 Stage 6000PSI PCP Air Tank High Pressure Hand Pump Hunting Scuba Diving Oxygen
4 Stage 6000PSI PCP Air Tank High Pressure Hand Pump Hunting Scuba Diving Oxygen
4 Stage 6000PSI PCP Air Tank High Pressure Hand Pump Hunting Scuba Diving Oxygen
4 Stage 6000PSI PCP Air Tank High Pressure Hand Pump Hunting Scuba Diving Oxygen

4 Stage 6000PSI PCP Air Tank High Pressure Hand Pump Hunting Scuba Diving Oxygen
4 Stage 6000PSI PCP Air Tank High Pressure Hand Pump Hunting Scuba Diving Oxygen. Made of high quality stainless steel, anti-rust and durable for long lasting. High pressure air pump by hand, with oil-water separator, compress dry and clean air into oxygen cylinder. With ergonomic design, easy to pump, convenient to operate, time-saving and labor-saving. With a pressure gauge on it, you can know when to stop inflating. Come with practical accessory for quick and easy use. Tighten the pressure relief screw before pumping up (tighten clockwise); loosen the pressure relief screw after pumping up (tighten counterclockwise). Non-explosive tube: it’s made of imported material, and with its 63MPA pressure resistant design, it is not easy to brittle in the condition of the temperature of -30°. Oil-water separator: make the gas more pure. It takes about 15 to 20 minutes to fill a 0.5L oxygen cylinder about pumping up 600 times. How to use: Please perform the pump test according to the instructions and follow the steps to pump. Working pressure: 0-40MPA (0-6000PSi). Connector type: 8MM female. Air Tube Length: Approx. 53cm / 20.9in. Connector Diameter: 3.1cm / 1.2in. Connector Length: 9.9cm / 3.9 in. Package Size: 64x 17.5 x 6 cm/ 25.19 x 6.88 x 2.36inch. 3340g/ 117.81 oz. 1 x High-pressure air pump. 3 Pack x Accessories. Cylindrical filter, sponge filter, hexagonal tool, test plug, car connector. Pump base, first-stage piston O-ring, third-stage piston, piston bead, piston head, gasket, activated carbon filter. The high-pressure air pump is a backup air source. Only as a last resort should you use it. Before use, please perform the inflation test according to the instructions and refer to the relevant steps to inflate. 0.5L oxygen cylinder requires about 600 pumps. After testing, Only two adult men take turns pumping for 15-20 minutes, can the oxygen cylinder be filled up. The pumping efficiency is increased by 20%. 24 pumps = 1MPA, so you can lose weight during pumping. During the pumping process, the high-pressure pump generates heat due to friction, so it is normal for the tube to heat up, but be careful with this condition. If you encounter any trouble. Please give us an opportunity to resolve any problems. We understand the concerns and frustrations you might have and we will try our best to service for you. We care about our valued customers and want to build a long-term business relationship with you, so please help us to make better. The item “4 Stage 6000PSI PCP Air Tank High Pressure Hand Pump Hunting Scuba Diving Oxygen” is in sale since Wednesday, August 5, 2020. This item is in the category “Sporting Goods\Water Sports\Scuba & Snorkeling\Tanks”. The seller is “jchou_fast” and is located in ShenZhen. This item can be shipped to United States, all countries in continental Asia, Canada, Mexico.
  • Air Tube Length: Approx. 53cm / 20.9in
  • Brand: Unbranded
  • Connector Diameter: 3.1cm / 1.2in
  • Connector Length:: 9.9cm / 3.9in
  • Connector type: 8MM female
  • Country/Region of Manufacture: China
  • Custom Bundle: No
  • Main Function: The pumping efficiency is increased by 20%
  • Material: Stainless Steel
  • Model: High-pressure air pump
  • Modified Item: No
  • MPN: Does Not Apply
  • Package Size: 64×17.5×6 cm/25.19×6.88×2.36inch
  • Package Weight: Approx. 3340g/117.81oz
  • Stage: 4 Stage
  • Working pressure: 0-40MPA (0-6000PSi)

4 Stage 6000PSI PCP Air Tank High Pressure Hand Pump Hunting Scuba Diving Oxygen

6000PSI 4 Stage PCP Airgun Rifle High Pressure Hand Pump Oxygen Air Tank Refill

6000PSI 4 Stage PCP Airgun Rifle High Pressure Hand Pump Oxygen Air Tank Refill
6000PSI 4 Stage PCP Airgun Rifle High Pressure Hand Pump Oxygen Air Tank Refill
6000PSI 4 Stage PCP Airgun Rifle High Pressure Hand Pump Oxygen Air Tank Refill
6000PSI 4 Stage PCP Airgun Rifle High Pressure Hand Pump Oxygen Air Tank Refill
6000PSI 4 Stage PCP Airgun Rifle High Pressure Hand Pump Oxygen Air Tank Refill
6000PSI 4 Stage PCP Airgun Rifle High Pressure Hand Pump Oxygen Air Tank Refill
6000PSI 4 Stage PCP Airgun Rifle High Pressure Hand Pump Oxygen Air Tank Refill
6000PSI 4 Stage PCP Airgun Rifle High Pressure Hand Pump Oxygen Air Tank Refill
6000PSI 4 Stage PCP Airgun Rifle High Pressure Hand Pump Oxygen Air Tank Refill
6000PSI 4 Stage PCP Airgun Rifle High Pressure Hand Pump Oxygen Air Tank Refill
6000PSI 4 Stage PCP Airgun Rifle High Pressure Hand Pump Oxygen Air Tank Refill

6000PSI 4 Stage PCP Airgun Rifle High Pressure Hand Pump Oxygen Air Tank Refill
6000PSI 4 Stage PCP Airgun Rifle High Pressure Hand Pump Oxygen Air Tank Refill. Made of high quality stainless steel, anti-rust and durable for long lasting. High pressure air pump by hand, with oil-water separator, compress dry and clean air into oxygen cylinder. With ergonomic design, easy to pump, convenient to operate, time-saving and labor-saving. With a pressure gauge on it, you can know when to stop inflating. Come with practical accessory for quick and easy use. Tighten the pressure relief screw before pumping up (tighten clockwise); loosen the pressure relief screw after pumping up (tighten counterclockwise). Non-explosive tube: it’s made of imported material, and with its 63MPA pressure resistant design, it is not easy to brittle in the condition of the temperature of -30°. Oil-water separator: make the gas more pure. It takes about 15 to 20 minutes to fill a 0.5L oxygen cylinder about pumping up 600 times. How to use: Please perform the pump test according to the instructions and follow the steps to pump. Working pressure: 0-40MPA (0-6000PSi). Connector type: 8MM female. Air Tube Length: Approx. 53cm / 20.9in. Connector Diameter: 3.1cm / 1.2in. Connector Length: 9.9cm / 3.9 in. Package Size: 64x 17.5 x 6 cm/ 25.19 x 6.88 x 2.36inch. 3340g/ 117.81 oz. 1 x High-pressure air pump. 3 Pack x Accessories. Cylindrical filter, sponge filter, hexagonal tool, test plug, car connector. Pump base, first-stage piston O-ring, third-stage piston, piston bead, piston head, gasket, activated carbon filter. The high-pressure air pump is a backup air source. Only as a last resort should you use it. Before use, please perform the inflation test according to the instructions and refer to the relevant steps to inflate. 0.5L oxygen cylinder requires about 600 pumps. After testing, Only two adult men take turns pumping for 15-20 minutes, can the oxygen cylinder be filled up. The pumping efficiency is increased by 20%. 24 pumps = 1MPA, so you can lose weight during pumping. During the pumping process, the high-pressure pump generates heat due to friction, so it is normal for the tube to heat up, but be careful with this condition. If you encounter any trouble. Please give us an opportunity to resolve any problems. We understand the concerns and frustrations you might have and we will try our best to service for you. We care about our valued customers and want to build a long-term business relationship with you, so please help us to make better. Welcome to our store! If you were not satisfied when you have received the item(s), please return it/them. Please contact me before you return it;If you do not receive the itemwe offer a. If you are willing return item back to us, please keep it in original package. We value your feedback so we will endeavor to respond to all inquiries. & Public holiday excluded. We would like to. Your action will help us offer our milk and bread. The item “6000PSI 4 Stage PCP Airgun Rifle High Pressure Hand Pump Oxygen Air Tank Refill” is in sale since Friday, June 19, 2020. This item is in the category “Sporting Goods\Water Sports\Scuba & Snorkeling\Tanks”. The seller is “fcc-ant” and is located in ShenZhen. This item can be shipped to United States, all countries in continental Asia, Canada, Mexico.
  • Air Tube Length: Approx. 53cm / 20.9in
  • Brand: Unbranded
  • Connector Diameter: 3.1cm / 1.2in
  • Connector Length:: 9.9cm / 3.9in
  • Connector type: 8MM female
  • Country/Region of Manufacture: China
  • Custom Bundle: No
  • Main Function: The pumping efficiency is increased by 20%
  • Material: Stainless Steel
  • Model: High-pressure air pump
  • Modified Item: No
  • MPN: Does Not Apply
  • Package Size: 64×17.5×6 cm/25.19×6.88×2.36inch
  • Package Weight: Approx. 3340g/117.81oz
  • Stage: 4 Stage
  • Working pressure: 0-40MPA (0-6000PSi)

6000PSI 4 Stage PCP Airgun Rifle High Pressure Hand Pump Oxygen Air Tank Refill

4 Stage 6000PSI PCP Air Tank Rifle Filling Stirrup Hand Pump High Pressure Gauge

4 Stage 6000PSI PCP Air Tank Rifle Filling Stirrup Hand Pump High Pressure Gauge
4 Stage 6000PSI PCP Air Tank Rifle Filling Stirrup Hand Pump High Pressure Gauge
4 Stage 6000PSI PCP Air Tank Rifle Filling Stirrup Hand Pump High Pressure Gauge
4 Stage 6000PSI PCP Air Tank Rifle Filling Stirrup Hand Pump High Pressure Gauge
4 Stage 6000PSI PCP Air Tank Rifle Filling Stirrup Hand Pump High Pressure Gauge
4 Stage 6000PSI PCP Air Tank Rifle Filling Stirrup Hand Pump High Pressure Gauge
4 Stage 6000PSI PCP Air Tank Rifle Filling Stirrup Hand Pump High Pressure Gauge
4 Stage 6000PSI PCP Air Tank Rifle Filling Stirrup Hand Pump High Pressure Gauge
4 Stage 6000PSI PCP Air Tank Rifle Filling Stirrup Hand Pump High Pressure Gauge
4 Stage 6000PSI PCP Air Tank Rifle Filling Stirrup Hand Pump High Pressure Gauge
4 Stage 6000PSI PCP Air Tank Rifle Filling Stirrup Hand Pump High Pressure Gauge
4 Stage 6000PSI PCP Air Tank Rifle Filling Stirrup Hand Pump High Pressure Gauge

4 Stage 6000PSI PCP Air Tank Rifle Filling Stirrup Hand Pump High Pressure Gauge
4 Stage 6000PSI PCP Air Tank Rifle Filling Stirrup Hand Pump High Pressure Gauge. The Pumping Efficiency is Increased By 20%. Made of high quality stainless steel, anti-rust and durable for long lasting. High pressure air pump by hand, with oil-water separator, compress dry and clean air into oxygen cylinder. With ergonomic design, easy to pump, convenient to operate, time-saving and labor-saving. With a pressure gauge on it, you can know when to stop inflating. Come with practical accessory for quick and easy use. Tighten the pressure relief screw before pumping up (tighten clockwise); loosen the pressure relief screw after pumping up (tighten counterclockwise). Non-explosive tube: it’s made of imported material, and with its 63MPA pressure resistant design, it is not easy to brittle in the condition of the temperature of -30°. Oil-water separator: make the gas more pure. It takes about 15 to 20 minutes to fill a 0.5L oxygen cylinder about pumping up 600 times. How to use: Please perform the pump test according to the instructions and follow the steps to pump. Working pressure: 0-40MPA (0-6000PSi). Connector type: 8MM female. Air Tube Length: Approx. 53cm / 20.9in. Connector Diameter: 3.1cm / 1.2in. Connector Length: 9.9cm / 3.9 in. Package Size: 64x 17.5 x 6 cm/ 25.19 x 6.88 x 2.36inch. 3340g/ 117.81 oz. 1 x High-pressure air pump. 1 x High pressure hose. 3 Pack x Accessories. (cylindrical filter, sponge filter, hexagonal tool, test plug, car connector, O-ring pump base, first-stage piston O-ring, third-stage piston, piston bead, piston head, gasket, activated carbon filter). The high-pressure air pump is a backup air source. Only as a last resort should you use it. Before use, please perform the inflation test according to the instructions and refer to the relevant steps to inflate. 0.5L oxygen cylinder requires about 600 pumps. After testing, Only two adult men take turns pumping for 15-20 minutes, can the oxygen cylinder be filled up. The pumping efficiency is increased by 20%. 24 pumps = 1MPA, so you can lose weight during pumping. During the pumping process, the high-pressure pump generates heat due to friction, so it is normal for the tube to heat up, but be careful with this condition. If you have any inquiry regarding the item or our service, We will try to reply any message within 24 working hours. Emails may not be monitored quickly. & Public holiday excluded. The item “4 Stage 6000PSI PCP Air Tank Rifle Filling Stirrup Hand Pump High Pressure Gauge” is in sale since Tuesday, June 16, 2020. This item is in the category “Sporting Goods\Outdoor Sports\Air Guns & Slingshots\Accessories”. The seller is “dst_tim” and is located in ShenZhen. This item can be shipped to United States, all countries in continental Asia, Canada, Mexico.
  • Air Tube Length: Approx. 53cm/20.9in
  • Brand: Unbranded
  • Come with Practical Accessory: For You to Quick & Easy Use
  • Connector Diameter: 3.1cm/1.2in
  • Connector Length: 9.9cm/3.9 in
  • Connector Type: 8MM Female
  • Made of High Quality Stainless Steel: Anti-Rust and Durable for Long Lasting
  • Material: Stainless Steel
  • Model: Four Stage Upgraded PCP Hand Pump
  • MPN: Does Not Apply
  • Non-Explosive Tube: Imported Material, 63MPA Pressure Resistant Design
  • Note: Air Tank is Not Included
  • Theory: Reciprocating Pump
  • Type: PCP Adapter
  • Upgraded Function: The Pumping Efficiency is Increased by 20% Compare to Normal One
  • With a Pressure Gauge on it: You Can Know When to Stop Inflating
  • With Ergonomic Design: Easy to Pump,Convenient to Operate,Time-saving and Labor-Saving
  • With Oil-Water Separator: Make The Gas More ure
  • Working Pressure: 0-40MPA (0-6000PSi)

4 Stage 6000PSI PCP Air Tank Rifle Filling Stirrup Hand Pump High Pressure Gauge

6000PSI 63MPA High Pressure Hand Air Pump for Oxygen Tank Diving Scuba Adapter

6000PSI 63MPA High Pressure Hand Air Pump for Oxygen Tank Diving Scuba Adapter
6000PSI 63MPA High Pressure Hand Air Pump for Oxygen Tank Diving Scuba Adapter
6000PSI 63MPA High Pressure Hand Air Pump for Oxygen Tank Diving Scuba Adapter
6000PSI 63MPA High Pressure Hand Air Pump for Oxygen Tank Diving Scuba Adapter
6000PSI 63MPA High Pressure Hand Air Pump for Oxygen Tank Diving Scuba Adapter
6000PSI 63MPA High Pressure Hand Air Pump for Oxygen Tank Diving Scuba Adapter
6000PSI 63MPA High Pressure Hand Air Pump for Oxygen Tank Diving Scuba Adapter
6000PSI 63MPA High Pressure Hand Air Pump for Oxygen Tank Diving Scuba Adapter
6000PSI 63MPA High Pressure Hand Air Pump for Oxygen Tank Diving Scuba Adapter
6000PSI 63MPA High Pressure Hand Air Pump for Oxygen Tank Diving Scuba Adapter
6000PSI 63MPA High Pressure Hand Air Pump for Oxygen Tank Diving Scuba Adapter

6000PSI 63MPA High Pressure Hand Air Pump for Oxygen Tank Diving Scuba Adapter
1# High Pressure Hand Air Pump. HIGH PRESSURE WITH SAFETY. High pressure goes up to 4500psi; copper female connector sealed by polyfluorene ensures leak-free performance; 21.7 flexible micro-bore hose can bear up to 63MPA pressure, safeguarding your safety with superior quality. DURABLE WITH SMOOTH MOTION. Sleek stainless steel construction brings smooth upward and downwards motion; 8mm copper female quick connector allows this pump to withstand over 10,000 times of tear and wear. Comes with oil and water separator for convenient operation; TPR padded grips for fatigue-free hand feelings, large gauge provides easy-to-read parameters. COMPACT & FOLDABLE FOR EASY STORAGE. 5mm foldable pedal for easy storage and transport, perfect to carry it around in your vehicle for unexpected use. Precisely shows the pressure with no air leaking, you can know when to stop inflating. Use top-grade material, anti-crack, low temperature is not easy to crisp. Tighten the pressure relief screw before inflating air (clockwise). Loosen the pressure relief screw to release the air after inflation completed. Make sure the tightness before using it. Make sure the high tightness between the connector and the air tank to avoid leaking. (Refer to the manual). Connect the high-pressure pump to the scuba tank. Close the pressure relief valve. Start to inflate and stop inflating when the air pressure reaches to 3000 psi or 200 bar. Open the pressure relief valve to relieve pressure. Pull out the scuba tank, and the inflation is completed. Net weight: about 2.5KG/5.51 Pounds. 61.5cm/24.21 inch. 25.6cm/10.08 inch. Air tube range: approx. Separator (L x W): approx. 9 x 3.1cm/3.54 x 1.22 inch. 1 Set of Accessories. We highly recommend inflating your air tank by air compressor machine, the air pump just for emergency use. 2# Scuba Adaptor with Hose. High pressure hose with stainless steel spring protector. Higher pressure resistance This fill station Knob type exhaust valve, exhaust is very smooth The DIN fitting(G5/8) will fit diving cylinders. The hose terminates with 8mm stainless quick coupler socket 8mm Ball Type LockDurable And Easy to aperate. Specifications: Material: aluminium alloy+ stainless steel Hose Length: 50cm / 19.7inch W. P: 160MPa/1600Bar/23206PSI Thread: DIN(G5/8) Hose quick coupler Thread: 8mm Weight: 290g Packing size: 18124cm. Package Includes: 1 x Scuba Adaptor with Hose. If you encounter any trouble. Please give us an opportunity to resolve any problems. We understand the concerns and frustrations you might have and we will try our best to service for you. We care about our valued customers and want to build a long-term business relationship with you, so please help us to make better. Welcome to our store! If you were not satisfied when you have received the item(s), please return it/them. Please contact me before you return it;If you do not receive the itemwe offer a. If you are willing return item back to us, please keep it in original package. We value your feedback so we will endeavor to respond to all inquiries. & Public holiday excluded. We would like to. Your action will help us offer our milk and bread. The item “6000PSI 63MPA High Pressure Hand Air Pump for Oxygen Tank Diving Scuba Adapter” is in sale since Wednesday, March 4, 2020. This item is in the category “Sporting Goods\Water Sports\Scuba & Snorkeling\Tanks”. The seller is “ddc_deal” and is located in ShenZhen. This item can be shipped to United States, all countries in continental Asia, Canada, Mexico.
  • Brand: Unbranded
  • Bundle Description: Hand Pump + Accessories
  • Connector: 8mm Female Quick Connector
  • Custom Bundle: No
  • Display: Pressure Gauge
  • Efficiency: 6-7 min (0.5L Tank)
  • Material: Stainless Steel
  • Measuring Range: 0-40MPA
  • Modified Item: No
  • MPN: Does Not Apply
  • Net weight: about 2.5KG/5.51 Pounds
  • Pressure Grade: 4500psi

6000PSI 63MPA High Pressure Hand Air Pump for Oxygen Tank Diving Scuba Adapter