4 Stage 6000PSI PCP Air Tank High Pressure Hand Pump Hunting Scuba Diving Oxygen

4 Stage 6000PSI PCP Air Tank High Pressure Hand Pump Hunting Scuba Diving Oxygen
4 Stage 6000PSI PCP Air Tank High Pressure Hand Pump Hunting Scuba Diving Oxygen
4 Stage 6000PSI PCP Air Tank High Pressure Hand Pump Hunting Scuba Diving Oxygen
4 Stage 6000PSI PCP Air Tank High Pressure Hand Pump Hunting Scuba Diving Oxygen
4 Stage 6000PSI PCP Air Tank High Pressure Hand Pump Hunting Scuba Diving Oxygen
4 Stage 6000PSI PCP Air Tank High Pressure Hand Pump Hunting Scuba Diving Oxygen
4 Stage 6000PSI PCP Air Tank High Pressure Hand Pump Hunting Scuba Diving Oxygen
4 Stage 6000PSI PCP Air Tank High Pressure Hand Pump Hunting Scuba Diving Oxygen
4 Stage 6000PSI PCP Air Tank High Pressure Hand Pump Hunting Scuba Diving Oxygen
4 Stage 6000PSI PCP Air Tank High Pressure Hand Pump Hunting Scuba Diving Oxygen
4 Stage 6000PSI PCP Air Tank High Pressure Hand Pump Hunting Scuba Diving Oxygen
4 Stage 6000PSI PCP Air Tank High Pressure Hand Pump Hunting Scuba Diving Oxygen

4 Stage 6000PSI PCP Air Tank High Pressure Hand Pump Hunting Scuba Diving Oxygen
4 Stage 6000PSI PCP Air Tank High Pressure Hand Pump Hunting Scuba Diving Oxygen. Made of high quality stainless steel, anti-rust and durable for long lasting. High pressure air pump by hand, with oil-water separator, compress dry and clean air into oxygen cylinder. With ergonomic design, easy to pump, convenient to operate, time-saving and labor-saving. With a pressure gauge on it, you can know when to stop inflating. Come with practical accessory for quick and easy use. Tighten the pressure relief screw before pumping up (tighten clockwise); loosen the pressure relief screw after pumping up (tighten counterclockwise). Non-explosive tube: it’s made of imported material, and with its 63MPA pressure resistant design, it is not easy to brittle in the condition of the temperature of -30°. Oil-water separator: make the gas more pure. It takes about 15 to 20 minutes to fill a 0.5L oxygen cylinder about pumping up 600 times. How to use: Please perform the pump test according to the instructions and follow the steps to pump. Working pressure: 0-40MPA (0-6000PSi). Connector type: 8MM female. Air Tube Length: Approx. 53cm / 20.9in. Connector Diameter: 3.1cm / 1.2in. Connector Length: 9.9cm / 3.9 in. Package Size: 64x 17.5 x 6 cm/ 25.19 x 6.88 x 2.36inch. 3340g/ 117.81 oz. 1 x High-pressure air pump. 3 Pack x Accessories. Cylindrical filter, sponge filter, hexagonal tool, test plug, car connector. Pump base, first-stage piston O-ring, third-stage piston, piston bead, piston head, gasket, activated carbon filter. The high-pressure air pump is a backup air source. Only as a last resort should you use it. Before use, please perform the inflation test according to the instructions and refer to the relevant steps to inflate. 0.5L oxygen cylinder requires about 600 pumps. After testing, Only two adult men take turns pumping for 15-20 minutes, can the oxygen cylinder be filled up. The pumping efficiency is increased by 20%. 24 pumps = 1MPA, so you can lose weight during pumping. During the pumping process, the high-pressure pump generates heat due to friction, so it is normal for the tube to heat up, but be careful with this condition. If you encounter any trouble. Please give us an opportunity to resolve any problems. We understand the concerns and frustrations you might have and we will try our best to service for you. We care about our valued customers and want to build a long-term business relationship with you, so please help us to make better. The item “4 Stage 6000PSI PCP Air Tank High Pressure Hand Pump Hunting Scuba Diving Oxygen” is in sale since Wednesday, August 5, 2020. This item is in the category “Sporting Goods\Scuba & Snorkelling\Cylinders & Tanks”. The seller is “bloomyield_inc” and is located in ShenZhen. This item can be shipped to all countries in Europe, all countries in continental Asia, Canada.
  • Air Tube Length: Approx. 53cm / 20.9in
  • Brand: Unbranded
  • Connector Diameter: 3.1cm / 1.2in
  • Connector Length:: 9.9cm / 3.9in
  • Connector type: 8MM female
  • Country/Region of Manufacture: China
  • Custom Bundle: No
  • Material: Stainless Steel
  • Modified Item: No
  • MPN: Does Not Apply
  • Package Size: 64×17.5×6 cm/25.19×6.88×2.36inch
  • Package Weight: Approx. 3340g/117.81oz
  • Working pressure: 0-40MPA (0-6000PSi)

4 Stage 6000PSI PCP Air Tank High Pressure Hand Pump Hunting Scuba Diving Oxygen

30MPA High Pressure Pump Water Separator Filtration Air Pump Scuba Diving Filter

30MPA High Pressure Pump Water Separator Filtration Air Pump Scuba Diving Filter
30MPA High Pressure Pump Water Separator Filtration Air Pump Scuba Diving Filter
30MPA High Pressure Pump Water Separator Filtration Air Pump Scuba Diving Filter
30MPA High Pressure Pump Water Separator Filtration Air Pump Scuba Diving Filter
30MPA High Pressure Pump Water Separator Filtration Air Pump Scuba Diving Filter
30MPA High Pressure Pump Water Separator Filtration Air Pump Scuba Diving Filter
30MPA High Pressure Pump Water Separator Filtration Air Pump Scuba Diving Filter
30MPA High Pressure Pump Water Separator Filtration Air Pump Scuba Diving Filter
30MPA High Pressure Pump Water Separator Filtration Air Pump Scuba Diving Filter
30MPA High Pressure Pump Water Separator Filtration Air Pump Scuba Diving Filter
30MPA High Pressure Pump Water Separator Filtration Air Pump Scuba Diving Filter

30MPA High Pressure Pump Water Separator Filtration Air Pump Scuba Diving Filter
You may also like. 30MPA High Pressure Pump Water Separator Filtration Air Pump Scuba Diving Filter. 1 30Mpa air filter. The shell is made of aviation grade aluminum alloy, resistance to high pressure. Internal use of imported activated carbon, reach 95% effect. Of oil and water separation. It can be used over and over again. Compatible with many kinds of air compressors. International Buyers – Please Note. Misused or abused merchandise will not be accounted as defective. We will reply you ASAP. Our aim is to provide Top Level Customer Service, normally so we will try our best to solve any problem. If you are dissatisfied for any reason, please donot be quick to leave negative/neutral feedback. The item “30MPA High Pressure Pump Water Separator Filtration Air Pump Scuba Diving Filter” is in sale since Tuesday, November 7, 2017. This item is in the category “Home & Garden\Tools & Workshop Equipment\Air Tools & Air Compressors\Air Compressors”. The seller is “burnerworld888″ and is located in ShenZhen. This item can be shipped worldwide.
  • Model: Filter-8mm
  • Country/Region of Manufacture: China
  • MPN: Does Not Apply
  • Brand: SHKJ

30MPA High Pressure Pump Water Separator Filtration Air Pump Scuba Diving Filter

Diving Oxygen Cylinder Air Pump High Pressure Scuba Air Tank Inflator Dive Tool

Diving Oxygen Cylinder Air Pump High Pressure Scuba Air Tank Inflator Dive Tool
Diving Oxygen Cylinder Air Pump High Pressure Scuba Air Tank Inflator Dive Tool
Diving Oxygen Cylinder Air Pump High Pressure Scuba Air Tank Inflator Dive Tool
Diving Oxygen Cylinder Air Pump High Pressure Scuba Air Tank Inflator Dive Tool
Diving Oxygen Cylinder Air Pump High Pressure Scuba Air Tank Inflator Dive Tool
Diving Oxygen Cylinder Air Pump High Pressure Scuba Air Tank Inflator Dive Tool
Diving Oxygen Cylinder Air Pump High Pressure Scuba Air Tank Inflator Dive Tool
Diving Oxygen Cylinder Air Pump High Pressure Scuba Air Tank Inflator Dive Tool
Diving Oxygen Cylinder Air Pump High Pressure Scuba Air Tank Inflator Dive Tool
Diving Oxygen Cylinder Air Pump High Pressure Scuba Air Tank Inflator Dive Tool
Diving Oxygen Cylinder Air Pump High Pressure Scuba Air Tank Inflator Dive Tool
Diving Oxygen Cylinder Air Pump High Pressure Scuba Air Tank Inflator Dive Tool

Diving Oxygen Cylinder Air Pump High Pressure Scuba Air Tank Inflator Dive Tool
Diving Oxygen Cylinder Air Pump High Pressure Scuba Air Tank Inflator Dive Tool. Made of high quality stainless steel, anti-rust and durable for long lasting. High pressure air pump by hand, with oil-water separator, compress dry and clean air into oxygen cylinder. With ergonomic design, easy to pump, convenient to operate, time-saving and labor-saving. With a pressure gauge on it, you can know when to stop inflating. Come with practical accessory for quick and easy use. Tighten the pressure relief screw before pumping up (tighten clockwise); loosen the pressure relief screw after pumping up (tighten counterclockwise). Non-explosive tube: it’s made of imported material, and with its 63MPA pressure resistant design, it is not easy to brittle in the condition of the temperature of -30°. Oil-water separator: make the gas more pure. It takes about 15 to 20 minutes to fill a 0.5L oxygen cylinder about pumping up 600 times. How to use: Please perform the pump test according to the instructions and follow the steps to pump. Working pressure: 0-40MPA (0-6000PSi). Connector type: 8MM female. Air Tube Length: Approx. 53cm / 20.9in. Connector Diameter: 3.1cm / 1.2in. Connector Length: 9.9cm / 3.9 in. Package Size: 64x 17.5 x 6 cm/ 25.19 x 6.88 x 2.36inch. 3340g/ 117.81 oz. 1 x High-pressure air pump. 3 Pack x Accessories. Cylindrical filter, sponge filter, hexagonal tool, test plug, car connector. Pump base, first-stage piston O-ring, third-stage piston, piston bead, piston head, gasket, activated carbon filter. The high-pressure air pump is a backup air source. Only as a last resort should you use it. Before use, please perform the inflation test according to the instructions and refer to the relevant steps to inflate. 0.5L oxygen cylinder requires about 600 pumps. After testing, Only two adult men take turns pumping for 15-20 minutes, can the oxygen cylinder be filled up. The pumping efficiency is increased by 20%. 24 pumps = 1MPA, so you can lose weight during pumping. During the pumping process, the high-pressure pump generates heat due to friction, so it is normal for the tube to heat up, but be careful with this condition. (except weekends and holidays). The item “Diving Oxygen Cylinder Air Pump High Pressure Scuba Air Tank Inflator Dive Tool” is in sale since Tuesday, September 8, 2020. This item is in the category “Sporting Goods\Water Sports\Scuba & Snorkeling\Tanks”. The seller is “yi-hsbt” and is located in ShenZhen. This item can be shipped to United States, all countries in continental Asia, Canada, Mexico.
  • Air Tube Length: Approx. 53cm / 20.9in
  • Brand: Unbranded
  • Connector Diameter: 3.1cm / 1.2in
  • Connector Length:: 9.9cm / 3.9in
  • Connector type: 8MM female
  • Main Function: The pumping efficiency is increased by 20%
  • Material: Stainless Steel
  • Model: High-pressure air pump
  • Modified Item: No
  • MPN: Does Not Apply
  • Package Size: 64×17.5×6 cm/25.19×6.88×2.36inch
  • Package Weight: Approx. 3340g/117.81oz
  • Stage: 4 Stage
  • Working pressure: 0-40MPA (0-6000PSi)

Diving Oxygen Cylinder Air Pump High Pressure Scuba Air Tank Inflator Dive Tool

Water-Oil Separator Air Filter For High Pressure PCP Compressor Air Pump Diving

Water-Oil Separator Air Filter For High Pressure PCP Compressor Air Pump Diving
Water-Oil Separator Air Filter For High Pressure PCP Compressor Air Pump Diving
Water-Oil Separator Air Filter For High Pressure PCP Compressor Air Pump Diving
Water-Oil Separator Air Filter For High Pressure PCP Compressor Air Pump Diving
Water-Oil Separator Air Filter For High Pressure PCP Compressor Air Pump Diving
Water-Oil Separator Air Filter For High Pressure PCP Compressor Air Pump Diving
Water-Oil Separator Air Filter For High Pressure PCP Compressor Air Pump Diving
Water-Oil Separator Air Filter For High Pressure PCP Compressor Air Pump Diving
Water-Oil Separator Air Filter For High Pressure PCP Compressor Air Pump Diving
Water-Oil Separator Air Filter For High Pressure PCP Compressor Air Pump Diving

Water-Oil Separator Air Filter For High Pressure PCP Compressor Air Pump Diving
You may also like. Water-Oil Separator Air Filter For High Pressure PCP Compressor Air Pump Diving. 30Mpa Water-Oil Separator Air Filter PCP Compressor Pump& Scuba Diving Connector. 1x 30Mpa double air filter 2x Air Pipes 1x Diving bottle connector Some mounting parts. · The filter equip with aviation grade aluminum alloy shell, resistance to high pressure. · It has two stage filter. The first stage is a water-oil separator, It works by the physical principles of gas reflux, Variable diameter cooling, vapor condensation. The second stage filter is an air filter, it with active carbon element inside, could absorbs moisture and odors from the air. The filter element need to be change after filling about 360L gas. · Total about 95% of oil and water is separated by this filter, and the smell of the air is good. · Compatible with many kinds of air compressors. You just need to pay attention to the connector. For the spared filter element inside, you can. Feedback is very important to us. We can address your concerns. It is impossible to address issues if we do not know about them! Your satisfaction is our ultimate goal. We work hard to earn your trust and future business. A If you receive a defective item, you may return it or ask for a discount. Mitsubishi, Siemens, Fagor CNC machine parts and accessories, Engraving & milling solutions, spindle. Motor with VFD kits, servo motor and servo drive kits, stepper motor and stepper drive kits, ball screw. Linear guide rail, 3D printer parts, etc. If you need any CNC parts or repairs, welcome to contact me, we will try our best to help you. If it’s non-workdays, please kindly be patient and wait till Monday. The item “Water-Oil Separator Air Filter For High Pressure PCP Compressor Air Pump Diving” is in sale since Monday, August 3, 2020. This item is in the category “Business, Office & Industrial\Hydraulics, Pneumatics, Pumps & Plumbing\Compressed Air Treatment\Oil-Water Separators”. The seller is “vipwindows_168″ and is located in Shen Zhen. This item can be shipped to North, South, or Latin America, all countries in Europe, all countries in continental Asia, Australia.
  • Brand: TOAUTO
  • MPN: Does Not Apply
  • Compressor Type: Reciprocating
  • Country/Region of Manufacture: China
  • Model: 2Filter-Diving
  • Features: with Scuba Diving Connector

Water-Oil Separator Air Filter For High Pressure PCP Compressor Air Pump Diving

High Pressure Electric PCP Air Compressor 30MPa 4500PSI Scuba Diving Pump 220V

High Pressure Electric PCP Air Compressor 30MPa 4500PSI Scuba Diving Pump 220V
High Pressure Electric PCP Air Compressor 30MPa 4500PSI Scuba Diving Pump 220V
High Pressure Electric PCP Air Compressor 30MPa 4500PSI Scuba Diving Pump 220V
High Pressure Electric PCP Air Compressor 30MPa 4500PSI Scuba Diving Pump 220V
High Pressure Electric PCP Air Compressor 30MPa 4500PSI Scuba Diving Pump 220V
High Pressure Electric PCP Air Compressor 30MPa 4500PSI Scuba Diving Pump 220V
High Pressure Electric PCP Air Compressor 30MPa 4500PSI Scuba Diving Pump 220V
High Pressure Electric PCP Air Compressor 30MPa 4500PSI Scuba Diving Pump 220V
High Pressure Electric PCP Air Compressor 30MPa 4500PSI Scuba Diving Pump 220V
High Pressure Electric PCP Air Compressor 30MPa 4500PSI Scuba Diving Pump 220V
High Pressure Electric PCP Air Compressor 30MPa 4500PSI Scuba Diving Pump 220V

High Pressure Electric PCP Air Compressor 30MPa 4500PSI Scuba Diving Pump 220V
High Pressure Electric PCP Air Compressor 30MPa 4500PSI Scuba Diving Pump 220V. · Better use experience because it with 6 improved design based on customer needs. Added pressure relief value pipe. Integrated water pump socket on the machine. Using waterproof switch, 4. With shockproof rubber mat. Using 1.5 square copper power line · Safe usage, with safety valve on low pressure cylinder and with precision explosion-proof valve on the high pressure side · With two-stage compression, and using high-quality components to ensure stability performance and long service time. Air Flow Rate: 50L/Min, 13.2GPM. Working Pressure range: 0-300BAR, 0-30MPA, 0-4500PSI. Temperature protection: Less or equal to 80 Celsius degree (176 Fahrenheit degree). Cooling System: Water Cooling. Compression Stage: Two Stage. Lubrication Mode: Splash Type. Material of Cover: Cast Aluminum. Material of Motor: 100% Pure Copper. Dimension: L350mm W175mm H38.3mm. Oil:L-MH 46 Anti-Wear Hydraulic Oil (High Pressure) GB 11118.1 or 5W-40 oil (Note: the machine is without oil because the oil is not allowed on the plane). Charge rate test: It takes 4 mins to fill full 0.5L tank to 30MPA. / It takes 8.5 mins to fill full 1L tank to 300BAR / It takes about 58minutes to full 6.8L tank to 30MPA. 1x 30MPA Air Compressor Pump and power line. 1x Filter and flexible pipe. 8x Filter Element (spare parts). 1x Filter plug (for test usage). 1x Female End air hose. 1set O-Ring and spring (spare parts). 2x Explosion-Proof Disc (spare parts). 1x Oil tank breath plug. Please and add lube oil into the compressor, and install(replace) tang breath plug before running the machine. 46 wear resistant hydraulic oil. The machine is zero pressure start, before starting, please release the decompression screw. If there is pressure in your cylinder, do not open the valve until the pressure of the machine is equal to or greater than the pressure of the cylinder. When the compressor working, the cooling system must be working at the same time. If you want the machine to work long times, please prepare two barrels of 30KG cooling water. When the temperature of the machine reaches 60 degrees Celsius, replace it immediately 5. If the machine vibrates violently, please add pad or towel under the compressor 6. Please remember to pay attention to the level of oil every time before start. We are not responsible for undeliverable address. If you are dissatisfied for any reason, please donot be quick to leave negative/neutral feedback. We work hard to make sure EVERY CUSTOMER 100% SATISFIED. If you have any special request, please kindly advise us once place order. We will be happy to assist you. We would try our best to serve you with any question / problem. Easy & Secure Payments. The item “High Pressure Electric PCP Air Compressor 30MPa 4500PSI Scuba Diving Pump 220V” is in sale since Tuesday, June 30, 2020. This item is in the category “Business & Industrial\Hydraulics, Pneumatics, Pumps & Plumbing\Pumps & Pump Accessories\Other Pumps”. The seller is “yonghon0*” and is located in China. This item can be shipped worldwide.
  • Type: Vacuum
  • Country/Region of Manufacture: China
  • MPN: Does Not Apply
  • Brand: TOAUTO
  • Model: 30MPA-PLUS
  • Power Source: 30MPa/4500PSI
  • Application: Industrial
  • voltage: 220V
  • Bundle Listing: Yes
  • Motor Speed: 2800R/Min
  • Air Flow Rate: 50L/Min
  • Working Pressure range: 0-300BAR, 0-30MPA, 0-4500PSI
  • Cooling System: Water Cooling
  • Compression Stage: Two Stage

High Pressure Electric PCP Air Compressor 30MPa 4500PSI Scuba Diving Pump 220V

4 Stage 6000PSI PCP Air Tank High Pressure Hand Pump Hunting Scuba Diving Oxygen

4 Stage 6000PSI PCP Air Tank High Pressure Hand Pump Hunting Scuba Diving Oxygen
4 Stage 6000PSI PCP Air Tank High Pressure Hand Pump Hunting Scuba Diving Oxygen
4 Stage 6000PSI PCP Air Tank High Pressure Hand Pump Hunting Scuba Diving Oxygen
4 Stage 6000PSI PCP Air Tank High Pressure Hand Pump Hunting Scuba Diving Oxygen
4 Stage 6000PSI PCP Air Tank High Pressure Hand Pump Hunting Scuba Diving Oxygen
4 Stage 6000PSI PCP Air Tank High Pressure Hand Pump Hunting Scuba Diving Oxygen
4 Stage 6000PSI PCP Air Tank High Pressure Hand Pump Hunting Scuba Diving Oxygen
4 Stage 6000PSI PCP Air Tank High Pressure Hand Pump Hunting Scuba Diving Oxygen
4 Stage 6000PSI PCP Air Tank High Pressure Hand Pump Hunting Scuba Diving Oxygen
4 Stage 6000PSI PCP Air Tank High Pressure Hand Pump Hunting Scuba Diving Oxygen
4 Stage 6000PSI PCP Air Tank High Pressure Hand Pump Hunting Scuba Diving Oxygen

4 Stage 6000PSI PCP Air Tank High Pressure Hand Pump Hunting Scuba Diving Oxygen
4 Stage 6000PSI PCP Air Tank High Pressure Hand Pump Hunting Scuba Diving Oxygen. Made of high quality stainless steel, anti-rust and durable for long lasting. High pressure air pump by hand, with oil-water separator, compress dry and clean air into oxygen cylinder. With ergonomic design, easy to pump, convenient to operate, time-saving and labor-saving. With a pressure gauge on it, you can know when to stop inflating. Come with practical accessory for quick and easy use. Tighten the pressure relief screw before pumping up (tighten clockwise); loosen the pressure relief screw after pumping up (tighten counterclockwise). Non-explosive tube: it’s made of imported material, and with its 63MPA pressure resistant design, it is not easy to brittle in the condition of the temperature of -30°. Oil-water separator: make the gas more pure. It takes about 15 to 20 minutes to fill a 0.5L oxygen cylinder about pumping up 600 times. How to use: Please perform the pump test according to the instructions and follow the steps to pump. Working pressure: 0-40MPA (0-6000PSi). Connector type: 8MM female. Air Tube Length: Approx. 53cm / 20.9in. Connector Diameter: 3.1cm / 1.2in. Connector Length: 9.9cm / 3.9 in. Package Size: 64x 17.5 x 6 cm/ 25.19 x 6.88 x 2.36inch. 3340g/ 117.81 oz. 1 x High-pressure air pump. 3 Pack x Accessories. Cylindrical filter, sponge filter, hexagonal tool, test plug, car connector. Pump base, first-stage piston O-ring, third-stage piston, piston bead, piston head, gasket, activated carbon filter. The high-pressure air pump is a backup air source. Only as a last resort should you use it. Before use, please perform the inflation test according to the instructions and refer to the relevant steps to inflate. 0.5L oxygen cylinder requires about 600 pumps. After testing, Only two adult men take turns pumping for 15-20 minutes, can the oxygen cylinder be filled up. The pumping efficiency is increased by 20%. 24 pumps = 1MPA, so you can lose weight during pumping. During the pumping process, the high-pressure pump generates heat due to friction, so it is normal for the tube to heat up, but be careful with this condition. If you encounter any trouble. Please give us an opportunity to resolve any problems. We understand the concerns and frustrations you might have and we will try our best to service for you. We care about our valued customers and want to build a long-term business relationship with you, so please help us to make better. The item “4 Stage 6000PSI PCP Air Tank High Pressure Hand Pump Hunting Scuba Diving Oxygen” is in sale since Wednesday, August 5, 2020. This item is in the category “Sporting Goods\Water Sports\Scuba & Snorkeling\Tanks”. The seller is “jchou_fast” and is located in ShenZhen. This item can be shipped to United States, all countries in continental Asia, Canada, Mexico.
  • Air Tube Length: Approx. 53cm / 20.9in
  • Brand: Unbranded
  • Connector Diameter: 3.1cm / 1.2in
  • Connector Length:: 9.9cm / 3.9in
  • Connector type: 8MM female
  • Country/Region of Manufacture: China
  • Custom Bundle: No
  • Main Function: The pumping efficiency is increased by 20%
  • Material: Stainless Steel
  • Model: High-pressure air pump
  • Modified Item: No
  • MPN: Does Not Apply
  • Package Size: 64×17.5×6 cm/25.19×6.88×2.36inch
  • Package Weight: Approx. 3340g/117.81oz
  • Stage: 4 Stage
  • Working pressure: 0-40MPA (0-6000PSi)

4 Stage 6000PSI PCP Air Tank High Pressure Hand Pump Hunting Scuba Diving Oxygen

Updated Diving High Pressure Hand Air pump Oxygen Tank Inflator+Pressure Gauge

Updated Diving High Pressure Hand Air pump Oxygen Tank Inflator+Pressure Gauge
Updated Diving High Pressure Hand Air pump Oxygen Tank Inflator+Pressure Gauge
Updated Diving High Pressure Hand Air pump Oxygen Tank Inflator+Pressure Gauge
Updated Diving High Pressure Hand Air pump Oxygen Tank Inflator+Pressure Gauge
Updated Diving High Pressure Hand Air pump Oxygen Tank Inflator+Pressure Gauge
Updated Diving High Pressure Hand Air pump Oxygen Tank Inflator+Pressure Gauge
Updated Diving High Pressure Hand Air pump Oxygen Tank Inflator+Pressure Gauge
Updated Diving High Pressure Hand Air pump Oxygen Tank Inflator+Pressure Gauge
Updated Diving High Pressure Hand Air pump Oxygen Tank Inflator+Pressure Gauge
Updated Diving High Pressure Hand Air pump Oxygen Tank Inflator+Pressure Gauge
Updated Diving High Pressure Hand Air pump Oxygen Tank Inflator+Pressure Gauge
Updated Diving High Pressure Hand Air pump Oxygen Tank Inflator+Pressure Gauge

Updated Diving High Pressure Hand Air pump Oxygen Tank Inflator+Pressure Gauge
Updated Diving High Pressure Hand Air pump Oxygen Tank Inflator+Pressure Gauge. Made of high quality stainless steel, anti-rust and durable for long lasting. High pressure air pump by hand, with oil-water separator, compress dry and clean air into oxygen cylinder. With ergonomic design, easy to pump, convenient to operate, time-saving and labor-saving. With a pressure gauge on it, you can know when to stop inflating. Come with practical accessory for quick and easy use. Tighten the pressure relief screw before pumping up (tighten clockwise); loosen the pressure relief screw after pumping up (tighten counterclockwise). Non-explosive tube: it’s made of imported material, and with its 63MPA pressure resistant design, it is not easy to brittle in the condition of the temperature of -30°. Oil-water separator: make the gas more pure. It takes about 15 to 20 minutes to fill a 0.5L oxygen cylinder about pumping up 600 times. How to use: Please perform the pump test according to the instructions and follow the steps to pump. Working pressure: 0-40MPA (0-6000PSi). Connector type: 8MM female. Air Tube Length: Approx. 53cm / 20.9in. Connector Diameter: 3.1cm / 1.2in. Connector Length: 9.9cm / 3.9 in. Package Size: 64x 17.5 x 6 cm/ 25.19 x 6.88 x 2.36inch. 3340g/ 117.81 oz. 1 x High-pressure air pump. 3 Pack x Accessories. Cylindrical filter, sponge filter, hexagonal tool, test plug, car connector. Pump base, first-stage piston O-ring, third-stage piston, piston bead, piston head, gasket, activated carbon filter. The high-pressure air pump is a backup air source. Only as a last resort should you use it. Before use, please perform the inflation test according to the instructions and refer to the relevant steps to inflate. 0.5L oxygen cylinder requires about 600 pumps. After testing, Only two adult men take turns pumping for 15-20 minutes, can the oxygen cylinder be filled up. The pumping efficiency is increased by 20%. 24 pumps = 1MPA, so you can lose weight during pumping. During the pumping process, the high-pressure pump generates heat due to friction, so it is normal for the tube to heat up, but be careful with this condition. The item “Updated Diving High Pressure Hand Air pump Oxygen Tank Inflator+Pressure Gauge” is in sale since Friday, June 5, 2020. This item is in the category “Sporting Goods\Scuba & Snorkelling\Cylinders & Tanks”. The seller is “noble_toc” and is located in ShenZhen. This item can be shipped to all countries in Europe, all countries in continental Asia, Canada.
  • Air Tube Length: Approx. 53cm / 20.9in
  • Brand: Unbranded
  • Connector Diameter: 3.1cm / 1.2in
  • Connector Length:: 9.9cm / 3.9in
  • Connector type: 8MM female
  • Country/Region of Manufacture: China
  • Custom Bundle: No
  • Material: Stainless Steel
  • Modified Item: No
  • MPN: Does Not Apply
  • Package Size: 64×17.5×6 cm/25.19×6.88×2.36inch
  • Package Weight: Approx. 3340g/117.81oz
  • Working pressure: 0-40MPA (0-6000PSi)

Updated Diving High Pressure Hand Air pump Oxygen Tank Inflator+Pressure Gauge

PCP Compressor Oil Water Separator Filter 4500 psi High Pressure Air Pump Diving

PCP Compressor Oil Water Separator Filter 4500 psi High Pressure Air Pump Diving
PCP Compressor Oil Water Separator Filter 4500 psi High Pressure Air Pump Diving
PCP Compressor Oil Water Separator Filter 4500 psi High Pressure Air Pump Diving
PCP Compressor Oil Water Separator Filter 4500 psi High Pressure Air Pump Diving
PCP Compressor Oil Water Separator Filter 4500 psi High Pressure Air Pump Diving
PCP Compressor Oil Water Separator Filter 4500 psi High Pressure Air Pump Diving
PCP Compressor Oil Water Separator Filter 4500 psi High Pressure Air Pump Diving
PCP Compressor Oil Water Separator Filter 4500 psi High Pressure Air Pump Diving
PCP Compressor Oil Water Separator Filter 4500 psi High Pressure Air Pump Diving
PCP Compressor Oil Water Separator Filter 4500 psi High Pressure Air Pump Diving

PCP Compressor Oil Water Separator Filter 4500 psi High Pressure Air Pump Diving
PCP Compressor Oil Water Separator Filter 4500 psi High Pressure Air Pump Diving. Top grade material. Made of high-quality aluminum alloy, features high hardness and long-lasting performance. More precise connector thread, 8mm quick-connect female connector, fast install the oil-water separator in seconds. Built-in black rubber o-ring, make sure the tightness when pumping. (Please replace the broken o-ring). Double filter of the activated carbon filter. Oil absorption, water absorption, impurities adsorption. Purer & more reliable. The surface finished with non-slip texture, features comfortable touch. Material: 7075 Aviation aluminum. Weight: about 998g/2.2 pounds. Application: PCP air compressor, scuba diving tank compressor, electric air pump, etc. Sleeve size (L x D): approx. 27 x 5.1cm/10.63 x 2.01 inch. Filter cartridge size (L x D): approx. 18 x 2.8cm/7.09 x 1.10 inch. Female connector diameter: 8mm. The item “PCP Compressor Oil Water Separator Filter 4500 psi High Pressure Air Pump Diving” is in sale since Friday, June 5, 2020. This item is in the category “Business, Office & Industrial\Hydraulics, Pneumatics, Pumps & Plumbing\Compressed Air Treatment\Oil-Water Separators”. The seller is “noble_toc” and is located in ShenZhen. This item can be shipped worldwide.
  • Activated Carbon: Double Filter of the Activated Carbon Filter
  • Activated Carbon Feature: Oil absorption, Water absorption, Impurities adsorption
  • Activated Carbon Features: Purer & More Reliable
  • Application: PCP air compressor, scuba diving tank compressor
  • Brand: Unbranded
  • Country/Region of Manufacture: China
  • Custom Bundle: No
  • Female connector diameter: 8mm
  • Material: 7075 Aviation aluminum
  • Model: OSB-001
  • Modified Item: Yes
  • MPN: Does Not Apply
  • Port Diameter: 3/8 in
  • Premium Workmanship: 8mm Quick-connect Female Connector, Fast install in seconds
  • Pressure endurance: 300Mpa/4500psi/300bar
  • Reliable Tightness: Built-in Black Rubber O-ring,Make sure the Tightness when Pumping
  • Sleeve size (L x D): Approx. 27 x 5.1cm/10.63 x 2.01 inch
  • Unit Quantity: 1
  • Unit Type: Unit
  • Warm Noted: Not Including PCP Air Compressor
  • Weight: about 998g/2.2 pounds

PCP Compressor Oil Water Separator Filter 4500 psi High Pressure Air Pump Diving

PCP Compressor Water-Oil Separator Air Filter 30Mpa High Pressure Pump Diving

PCP Compressor Water-Oil Separator Air Filter 30Mpa High Pressure Pump Diving
PCP Compressor Water-Oil Separator Air Filter 30Mpa High Pressure Pump Diving
PCP Compressor Water-Oil Separator Air Filter 30Mpa High Pressure Pump Diving
PCP Compressor Water-Oil Separator Air Filter 30Mpa High Pressure Pump Diving
PCP Compressor Water-Oil Separator Air Filter 30Mpa High Pressure Pump Diving
PCP Compressor Water-Oil Separator Air Filter 30Mpa High Pressure Pump Diving
PCP Compressor Water-Oil Separator Air Filter 30Mpa High Pressure Pump Diving
PCP Compressor Water-Oil Separator Air Filter 30Mpa High Pressure Pump Diving
PCP Compressor Water-Oil Separator Air Filter 30Mpa High Pressure Pump Diving
PCP Compressor Water-Oil Separator Air Filter 30Mpa High Pressure Pump Diving
PCP Compressor Water-Oil Separator Air Filter 30Mpa High Pressure Pump Diving
PCP Compressor Water-Oil Separator Air Filter 30Mpa High Pressure Pump Diving

PCP Compressor Water-Oil Separator Air Filter 30Mpa High Pressure Pump Diving
PCP Compressor Water-Oil Separator Air Filter 30Mpa High Pressure Pump Diving. Top grade material. Made of high-quality aluminum alloy, features high hardness and long-lasting performance. More precise connector thread, 8mm quick-connect female connector, fast install the oil-water separator in seconds. Built-in black rubber o-ring, make sure the tightness when pumping. (Please replace the broken o-ring). Double filter of the activated carbon filter. Oil absorption, water absorption, impurities adsorption. Purer & more reliable. The surface finished with non-slip texture, features comfortable touch. Material: 7075 Aviation aluminum. Weight: about 998g/2.2 pounds. Application: PCP air compressor, scuba diving tank compressor, electric air pump, etc. Sleeve size (L x D): approx. 27 x 5.1cm/10.63 x 2.01 inch. Filter cartridge size (L x D): approx. 18 x 2.8cm/7.09 x 1.10 inch. Female connector diameter: 8mm. If you encounter any trouble. Please give us an opportunity to resolve any problems. We understand the concerns and frustrations you might have and we will try our best to service for you. We care about our valued customers and want to build a long-term business relationship with you, so please help us to make better. Welcome to our store! If you were not satisfied when you have received the item(s), please return it/them. Please contact me before you return it;If you do not receive the itemwe offer a. If you are willing return item back to us, please keep it in original package. We value your feedback so we will endeavor to respond to all inquiries. & Public holiday excluded. We would like to earn your. Your action will help us offer our milk and bread. The item “PCP Compressor Water-Oil Separator Air Filter 30Mpa High Pressure Pump Diving” is in sale since Tuesday, July 28, 2020. This item is in the category “Business & Industrial\Hydraulics, Pneumatics, Pumps & Plumbing\Compressed Air Treatment\Oil-Water Separators”. The seller is “ddc_deal” and is located in ShenZhen. This item can be shipped to North, South, or Latin America, all countries in Europe.
  • Application: PCP air compressor, scuba diving tank compressor
  • Brand: Unbranded
  • Country/Region of Manufacture: China
  • Custom Bundle: No
  • Female connector diameter: 8mm
  • Filter cartridge size (L x D): approx. 18 x 2.8cm/7.09 x 1.10 inch
  • Main color: Golden
  • Material: 7075 Aviation aluminum
  • Model: OSB-001
  • Modified Item: Yes
  • MPN: Does Not Apply
  • Package Include: Water-Oil Separator + High Pressure Horse
  • Port Diameter: 3/8 in
  • Pressure endurance: 300Mpa/4500psi/300bar
  • Sleeve size (L x D): approx. 27 x 5.1cm/10.63 x 2.01 inch
  • Weight: about 998g/2.2 pounds

PCP Compressor Water-Oil Separator Air Filter 30Mpa High Pressure Pump Diving

4500PSI 63MPA High Pressure Hand Air Pump PCP Scuba Diving Tank Refill 3 Stage

4500PSI 63MPA High Pressure Hand Air Pump PCP Scuba Diving Tank Refill 3 Stage
4500PSI 63MPA High Pressure Hand Air Pump PCP Scuba Diving Tank Refill 3 Stage
4500PSI 63MPA High Pressure Hand Air Pump PCP Scuba Diving Tank Refill 3 Stage
4500PSI 63MPA High Pressure Hand Air Pump PCP Scuba Diving Tank Refill 3 Stage
4500PSI 63MPA High Pressure Hand Air Pump PCP Scuba Diving Tank Refill 3 Stage
4500PSI 63MPA High Pressure Hand Air Pump PCP Scuba Diving Tank Refill 3 Stage
4500PSI 63MPA High Pressure Hand Air Pump PCP Scuba Diving Tank Refill 3 Stage
4500PSI 63MPA High Pressure Hand Air Pump PCP Scuba Diving Tank Refill 3 Stage
4500PSI 63MPA High Pressure Hand Air Pump PCP Scuba Diving Tank Refill 3 Stage
4500PSI 63MPA High Pressure Hand Air Pump PCP Scuba Diving Tank Refill 3 Stage
4500PSI 63MPA High Pressure Hand Air Pump PCP Scuba Diving Tank Refill 3 Stage

4500PSI 63MPA High Pressure Hand Air Pump PCP Scuba Diving Tank Refill 3 Stage
4500PSI 63MPA High Pressure Hand Air Pump PCP Scuba Diving Tank Refill 3 Stage. 1# High Pressure Hand Air Pump. HIGH PRESSURE WITH SAFETY. High pressure goes up to 4500psi; copper female connector sealed by polyfluorene ensures leak-free performance; 21.7 flexible micro-bore hose can bear up to 63MPA pressure, safeguarding your safety with superior quality. DURABLE WITH SMOOTH MOTION. Sleek stainless steel construction brings smooth upward and downwards motion; 8mm copper female quick connector allows this pump to withstand over 10,000 times of tear and wear. Comes with oil and water separator for convenient operation; TPR padded grips for fatigue-free hand feelings, large gauge provides easy-to-read parameters. COMPACT & FOLDABLE FOR EASY STORAGE. 5mm foldable pedal for easy storage and transport, perfect to carry it around in your vehicle for unexpected use. Precisely shows the pressure with no air leaking, you can know when to stop inflating. Use top-grade material, anti-crack, low temperature is not easy to crisp. Tighten the pressure relief screw before inflating air (clockwise). Loosen the pressure relief screw to release the air after inflation completed. Make sure the tightness before using it. Make sure the high tightness between the connector and the air tank to avoid leaking. (Refer to the manual). Connect the high-pressure pump to the scuba tank. Close the pressure relief valve. Start to inflate and stop inflating when the air pressure reaches to 3000 psi or 200 bar. Open the pressure relief valve to relieve pressure. Pull out the scuba tank, and the inflation is completed. Net weight: about 2.5KG/5.51 Pounds. 61.5cm/24.21 inch. 25.6cm/10.08 inch. Air tube range: approx. Separator (L x W): approx. 9 x 3.1cm/3.54 x 1.22 inch. 1 Set of Accessories. We highly recommend inflating your air tank by air compressor machine, the air pump just for emergency use. 2# Only Scuba Adaptor with Hose. High pressure hose with stainless steel spring protector. Higher pressure resistance This fill station Knob type exhaust valve, exhaust is very smooth The DIN fitting(G5/8) will fit diving cylinders. The hose terminates with 8mm stainless quick coupler socket 8mm Ball Type LockDurable And Easy to aperate. Specifications: Material: aluminium alloy+ stainless steel Hose Length: 50cm / 19.7inch W. P: 160MPa/1600Bar/23206PSI Thread: DIN(G5/8) Hose quick coupler Thread: 8mm Weight: 290g Packing size: 18124cm. Package Includes: 1 x Scuba Adaptor with Hose. If you encounter any trouble. Please give us an opportunity to resolve any problems. We understand the concerns and frustrations you might have and we will try our best to service for you. We care about our valued customers and want to build a long-term business relationship with you, so please help us to make better. Welcome to our store! If you were not satisfied when you have received the item(s), please return it/them. Please contact me before you return it;If you do not receive the itemwe offer a. If you are willing return item back to us, please keep it in original package. We value your feedback so we will endeavor to respond to all inquiries. & Public holiday excluded. We would like to. Your action will help us offer our milk and bread. The item “4500PSI 63MPA High Pressure Hand Air Pump PCP Scuba Diving Tank Refill 3 Stage” is in sale since Thursday, July 2, 2020. This item is in the category “Sporting Goods\Water Sports\Scuba & Snorkeling\Tanks”. The seller is “noble_coo” and is located in ShenZhen. This item can be shipped to United States, all countries in continental Asia, Canada, Mexico.
  • Brand: Unbranded
  • Bundle Description: Hand Pump + Accessories
  • COMPACT & FOLDABLE FOR EASY STORAGE: 5mm foldable pedal for easy storage and transport
  • Connector: 8mm Female Quick Connector
  • Custom Bundle: No
  • Display: Pressure Gauge
  • DURABLE WITH SMOOTH MOTION: sleek stainless steel
  • Efficiency: 6-7 min (0.5L Tank)
  • HIGH PRESSURE WITH SAFETY: high pressure goes up to 4500psi
  • Material: Stainless Steel
  • Measuring Range: 0-40MPA
  • Modified Item: No
  • MPN: Does Not Apply
  • Net weight: about 2.5KG/5.51 Pounds
  • OIL-WATER SEPARATOR: anti-crack, low temperature is not easy to crisp
  • Pressure Grade: 4500psi
  • USER-FRIENDLY DESIGNS: Comes with oil and water separator for convenient operation
  • VISIBLE PRESSURE GAUGE: Precisely shows the pressure with no air leaking

4500PSI 63MPA High Pressure Hand Air Pump PCP Scuba Diving Tank Refill 3 Stage