12V Kayak Inflatable Pump Electric High Pressure Automatic Air Pump Kit

12V Kayak Inflatable Pump Electric High Pressure Automatic Air Pump Kit
12V Kayak Inflatable Pump Electric High Pressure Automatic Air Pump Kit
12V Kayak Inflatable Pump Electric High Pressure Automatic Air Pump Kit
12V Kayak Inflatable Pump Electric High Pressure Automatic Air Pump Kit
12V Kayak Inflatable Pump Electric High Pressure Automatic Air Pump Kit
12V Kayak Inflatable Pump Electric High Pressure Automatic Air Pump Kit
12V Kayak Inflatable Pump Electric High Pressure Automatic Air Pump Kit
12V Kayak Inflatable Pump Electric High Pressure Automatic Air Pump Kit
12V Kayak Inflatable Pump Electric High Pressure Automatic Air Pump Kit
12V Kayak Inflatable Pump Electric High Pressure Automatic Air Pump Kit

12V Kayak Inflatable Pump Electric High Pressure Automatic Air Pump Kit
12V Portable Electric High Pressure Air Pump for Inflatable Canoe Boats Rafts. Made of high quality PVC, solid and durable. Automatic pump can be used to inflate or deflate, high speed, high-pressure. Automatically stop when the setting pressure is reached, convenient to use. With limit maximum pressure and minimum pressure, it can prevent over-inflating, safe assured. Suitable for inflating canoe boats, kayaks, kites, etc. Type: GP80(cm)/31.49in. Power cord length: 3m/9.84feet. Length of inflatable tube: 2m/6.56feet. 1 Yellow inflatable pump. 1 Black inflatable tube. 1 8 in 1 short pipe. 1 Adapter with white gasket. If inflating the dinghy, please adjust the pressure value on scale to 25(or the corresponding pressure value). Adjust the pressure to 60 if you inflate the air mat. Improper pressure setting can cause fatal injury to rubber dinghy. The automatic air charging pump can be. Used to inflate or deflate. And the interface with a gap is a deflation interface. Please pay attention to the positive and negative poles when wiring, the red is the positive pole. Instead of leaving negative/neutral feedback or opening a dispute. Our listing price includes the value of goods, packaging cost, and export. Please check with your country’s. We will reply your message within 48 hours. If you do not receive our reply within 48 hours, pls. Post a message again because sometimes our message system may block some emails. If you are satisfied with our service, pls. Our aim is to provide Top Level Customer Service, your recognition will encourage us greatly and serve you better. We strive to keep all our customers satisfy. We will always do our up most to exceed your expectations in customer service, communication and dispatching of your orders. The item “12V Kayak Inflatable Pump Electric High Pressure Automatic Air Pump Kit” is in sale since Wednesday, August 21, 2019. This item is in the category “Sporting Goods\Canoeing & Kayaking\Accessories”. The seller is “carmoment2018″ and is located in Hongkong. This item can be shipped worldwide.
  • Brand: Unbranded
  • Colour: Yellow
  • Material: PVC
  • MPN: Does Not Apply
  • Type: GP80

12V Kayak Inflatable Pump Electric High Pressure Automatic Air Pump Kit

12V High Pressure Electric Air Pump for Inflatable Boats Rafts Kayaks Kite

12V High Pressure Electric Air Pump for Inflatable Boats Rafts Kayaks Kite
12V High Pressure Electric Air Pump for Inflatable Boats Rafts Kayaks Kite
12V High Pressure Electric Air Pump for Inflatable Boats Rafts Kayaks Kite
12V High Pressure Electric Air Pump for Inflatable Boats Rafts Kayaks Kite
12V High Pressure Electric Air Pump for Inflatable Boats Rafts Kayaks Kite
12V High Pressure Electric Air Pump for Inflatable Boats Rafts Kayaks Kite
12V High Pressure Electric Air Pump for Inflatable Boats Rafts Kayaks Kite
12V High Pressure Electric Air Pump for Inflatable Boats Rafts Kayaks Kite
12V High Pressure Electric Air Pump for Inflatable Boats Rafts Kayaks Kite
12V High Pressure Electric Air Pump for Inflatable Boats Rafts Kayaks Kite

12V High Pressure Electric Air Pump for Inflatable Boats Rafts Kayaks Kite
High Pressure Electric Air Pump 12V for Inflatable Boats Rafts Kayaks Kite SUP. Made of high quality PVC, solid and durable. Automatic pump can be used to inflate or deflate, high speed, high-pressure. Automatically stop when the setting pressure is reached, convenient to use. With limit maximum pressure and minimum pressure, it can prevent over-inflating, safe assured. Suitable for inflating canoe boats, kayaks, kites, etc. Type: GP80(cm)/31.49in. Power cord length: 3m/9.84feet. Length of inflatable tube: 2m/6.56feet. 1 Yellow inflatable pump. 1 Black inflatable tube. 1 8 in 1 short pipe. 1 Adapter with white gasket. If inflating the dinghy, please adjust the pressure value on scale to 25(or the corresponding pressure value). Adjust the pressure to 60 if you inflate the air mat. Improper pressure setting can cause fatal injury to rubber dinghy. The automatic air charging pump can be. Used to inflate or deflate. And the interface with a gap is a deflation interface. Please pay attention to the positive and negative poles when wiring, the red is the positive pole. Our listing price includes the value of goods, packaging cost, and export. Please check with your country’s. We will reply your message within 48 hours. If you do not receive our reply within 48 hours, pls. Post a message again because sometimes our message system may block some emails. If you are satisfied with our service, pls. Our aim is to provide Top Level Customer Service, your recognition will encourage us greatly and serve you better. We strive to keep all our customers satisfy. We will always do our up most to exceed your expectations in customer service, communication and dispatching of your orders. The item “12V High Pressure Electric Air Pump for Inflatable Boats Rafts Kayaks Kite” is in sale since Wednesday, June 26, 2019. This item is in the category “Sporting Goods\Boating, Water Sports\Watercraft\Inflatables”. The seller is “auto_field” and is located in Hongkong. This item can be shipped worldwide.
  • Brand: Unbranded
  • Colour: Yellow
  • Inflation speed: 500L/min
  • Length of inflatable tube: 2m/6.56feet
  • Material: PVC
  • Maximum pressure: 80KPa
  • Minimum pressure: 10KPa
  • MPN: Does Not Apply
  • Power cord length: 3m/9.84feet
  • Type: GP80(cm)/31.49in
  • Voltage: DC12V
  • Working time: >1H

12V High Pressure Electric Air Pump for Inflatable Boats Rafts Kayaks Kite

Electric PUMP for Inflatable Boats Rafts Kayaks Kite High Pressure Air11 PSI 12v

Electric PUMP for Inflatable Boats Rafts Kayaks Kite High Pressure Air11 PSI 12v
Electric PUMP for Inflatable Boats Rafts Kayaks Kite High Pressure Air11 PSI 12v
Electric PUMP for Inflatable Boats Rafts Kayaks Kite High Pressure Air11 PSI 12v
Electric PUMP for Inflatable Boats Rafts Kayaks Kite High Pressure Air11 PSI 12v
Electric PUMP for Inflatable Boats Rafts Kayaks Kite High Pressure Air11 PSI 12v
Electric PUMP for Inflatable Boats Rafts Kayaks Kite High Pressure Air11 PSI 12v
Electric PUMP for Inflatable Boats Rafts Kayaks Kite High Pressure Air11 PSI 12v

Electric PUMP for Inflatable Boats Rafts Kayaks Kite High Pressure Air11 PSI 12v
High-Pressure Electric Air Pump-12v for Inflatable Boats Rafts Kayaks Kites. OUR GOAL IS TO MAKE YOU SMILE AND HAPPY!! KITE ADAPTERS ARE NOT INCLUDED BY DEFAULT. PLEASE LET US KNOW IF YOU NEED THEM. ADAPTERS INCLUDED IN THE PACKAGE ARE – 8 PIECE STANDARD MULTI VALVE ADAPTERS + 1 ADAPTER FOR HALKEY-ROBERTS VALVE. High-Pressure 12 psi Electric Pump with Analog Gauge for Inflatable Boats, Rafts, Kayaks, SUPs, etc. Our high-pressure Analog Gauge Inflator Pumps are a incredible dual action, automatic, 12 volt pump developed in Australia. Designed to blowup inflatable boats with no effort at all. Just set the pressure gauge and press the ON Button. The pump will then inflate your boat to its correct pressure and stop automatically. But in our restless efforts to bring savings. Analog Gauge Air Pump is perfect product for. Drop-stitch high-pressure air floors. Inflatable stand up paddleboards. Inflatable fenders, and many more inflatable products.. Analog Gauge High Pressure Air Pump features include. High Speed, High-Pressure pump. Air pressure readings in KPa. Automatic Stop when chosen pressure is reached. Reliable combination of Turbine & Piston to reduce wear. Gator clips for quick connection to the 12V car battery. All necessary adapters are included to fit most air valves. FREE soft carry bag with storage compartments and carry strap. Our high-pressure Analog Gauge inflation pumps are adjustable from 2.2 PSI up to a maximum of 12 PSI. By delivering around 200 liters/minute, electric pump will inflate a typical 14′ boat in about 8-10 minutes. High-pressure inflation pump automatically stops at the pressure level that you select and is also ideal for deflating. It comes with crocodile clips to connect to a 12V battery as well as a set of generic multi valve adapters. Once you’ve used one of these pumps, you’ll never manually pump your boat again, because you no longer need a hand pump. These pumps are not only excellent for quickly inflating boats and rafts, but also great for quickly filling inflatable high-pressure air deck floors and stand up paddle boards to up to 10-12psi air pressure. Without a high-pressure electric inflator, you’d have to use a hand pump for around 15-20 minutes, under the hot sun, which might not be your idea of fun. With this magic pump, you will be ready to roll in under 10 minutes with no effort at all. All high-pressure air pumps now come equipped with a set of generic plastic adapters designed to fit most of air valves on a market and Deluxe valve adapter designed to fit Saturn’s Naru valves. Choose correct adapter that will fit nicely into air valve, and will press pushpin down when inserted for proper inflation. After inflation, when adapter is removed, valve will lock automatically preventing air from escaping. You don’t need any other valve adapters besides those that already provided with our electric air pump. Our Air Pumps can be used with a regular 12V Car Battery or with much smaller 12V 7Ah Sealed Lead Acid Batteries. That are widely available on Internet. Along with wall chargers. Just place 12V 7Ah battery into a small soft cooler bag, and connect pump’s gator cables to use anywhere. These are same 12V 7Ah batteries that were used in our Deluxe model of electric pump shown in a video below. Digital High-Pressure Electric Pump for 12V battery. How the pump works: When the pump starts it will be on a HIGH VOLUME (Turbine) pump until the pressure reaches 2-3 PSI. Then the pump will automatically switch over to the HIGH PRESSURE (Piston) pump and inflate the boat to its set pressure. Once reaching the set pressure the pump will automatically turn itself off. 12 PSI / 80 KPa. 1.5 PSI / 10 KPa. Air intake pipe Diametre. 67 dB / 7M. We will leave feedback after any deals completed. We implore you to not leave negative or neutral feedback without talking to us first! The item “Electric PUMP for Inflatable Boats Rafts Kayaks Kite High Pressure Air11 PSI 12v” is in sale since Saturday, March 5, 2016. This item is in the category “Sporting Goods\Water Sports\Kayaking, Canoeing & Rafting\Accessories”. The seller is “utka7676″ and is located in Mississauga, ON. This item can be shipped to Canada, United States.
  • Brand: SATURN
  • Model: GP-80
  • MPN: GP-80
  • Country/Region of Manufacture: China

Electric PUMP for Inflatable Boats Rafts Kayaks Kite High Pressure Air11 PSI 12v

9’10 (300 cm) inflatable boat with high pressure air floor DINGHY 4 person

9'10 (300 cm) inflatable boat with high pressure air floor DINGHY 4 person
9'10 (300 cm) inflatable boat with high pressure air floor DINGHY 4 person
9'10 (300 cm) inflatable boat with high pressure air floor DINGHY 4 person
9'10 (300 cm) inflatable boat with high pressure air floor DINGHY 4 person
9'10 (300 cm) inflatable boat with high pressure air floor DINGHY 4 person
9'10 (300 cm) inflatable boat with high pressure air floor DINGHY 4 person
9'10 (300 cm) inflatable boat with high pressure air floor DINGHY 4 person

9'10 (300 cm) inflatable boat with high pressure air floor DINGHY 4 person
10 ft inflatable boat DINGHY with air deck floor. NEW 2018 Aquamarine GYC 300 9.8′ inflatable boat ideal for any outdoor recreation event including fishing, yacht tenders, exploring, or cruising. Lightweight (85 lbs only), practical is easy carried in it’s compact bag and can be stowed in small spaces as car trunk The air-mat floor is cleverly designed with thousand of polyester threads criss-crossing one another, it is inflated to a high pressure, proving as tough and rigid as a conventional wooden floor boat but with the added light and comfortable. 9 ft 10 rated for up to 10 HP short shaft outboard motors. V shape hull with DOUBLE SIZE RUBBING stake UNDER the KEEL for extra bottom protection. NOW with SECOND LAYER OF PVC FABRIC ON THE BOTTOM OF THE TUBES. Max air pressure boat. Max air pressure floor. 9.8 ft (300 cm). 1146 lbs (500 kg). High pressure air deck (10psi). 44” x 24″ x 14″. HIGH PRESSURE AIR Floor. These boats are made with an extremely rugged material that is very difficult to puncture or tear. Our Fabric is made with the STS (SOL Type System) process. This does not merely coat the internal reinforcement fabric with an outer layer, but forces the outer material into the thousands of tiny gaps in the base fabric weave to form a single homogenous material. PRODUCT INFORMATION AND DETAILS OF DESIGN. Stainless steel screw added fixture to reinforce connection between tubes and transom. ALUMINUM SEAT and NEW SEAT SLIDE-IN DESIGN. Once installed seat remains in place secure and sturdy. Reinforced DOUBLE SIZE RUBBING stake UNDER the KEEL for extra strength and durability where you need it most. Aids to protect your boat against debris , rocks and sandbars. EXTRA LAYER OF PVC coated material ON TRANSOM ATTACHMENT to better secure tube connection. FOLD DOWN LOCKING COLLAPSIBLE OARS WITH OAR HOLDERS. It is handmade with high quality materials and carefully supervised during its manufacturing process. Hand sealed is the most reliable and traditional way to make perfect inflatable boat. 1 – Inflatable Boat with High pressure airdeck floor. 1 – Boat carrying bag. 1 – Set of oars (set of two). 1 – Foot pump. 1 – Repair kit comes with 2 repair fabrics patches and 60g glue. 1 – 16.2mm thickness aluminum bench seat. 1 – 8mm towing rope. 2 – ALUMINUM SEATS. If any part becomes defective, return it for repair or no charge replacement. Guarantee begins when product is delivered. NOTE: Seams are considered to have delaminated when the outer coating separates from the fabric base or the seam lies its structural strength.. Neglect, lack of maintenance, accident, abnormal operation or improper installation or services; b. Use of an accessory or part not authorized by us; c. Participating in or preparing for racing or other competitive activity; d. Alteration or removal activity; 3. We reserve the right to improve the design of any product without assuming any obligation to modify any product previously manufactured. The item “9’10 (300 cm) inflatable boat with high pressure air floor DINGHY 4 person” is in sale since Friday, January 19, 2018. This item is in the category “Sporting Goods\Water Sports\Kayaking, Canoeing & Rafting\Inflatables”. The seller is “aquamarineboats” and is located in Vancouver, BC. This item can be shipped to Canada, United States.
  • Model: GYC300
  • Type: Raft
  • MPN: Does Not Apply
  • Brand: AQUAMARINE

9'10 (300 cm) inflatable boat with high pressure air floor DINGHY 4 person

LCD Rubber inflatable boat high pressure electric air pump 80KPA 12V DC GP80D Y

LCD Rubber inflatable boat high pressure electric air pump 80KPA 12V DC GP80D Y
LCD Rubber inflatable boat high pressure electric air pump 80KPA 12V DC GP80D Y
LCD Rubber inflatable boat high pressure electric air pump 80KPA 12V DC GP80D Y
LCD Rubber inflatable boat high pressure electric air pump 80KPA 12V DC GP80D Y

LCD Rubber inflatable boat high pressure electric air pump 80KPA 12V DC GP80D Y
Output pressure can be set 2. Automatically stop when pressure is reached 3. Fast inflation, save time 4. Inflation pressure error, safe use 5. Output pressure range, suitable for a variety of inflatable products 6. Inflate/deflate two modes with one key switch 7. Light-weight & Compact Design 8. Easy to use – just plug into your 12V battery for power Specification: MODEL:GP-80D Max input air:500L/min Max air pressure:80Kpa Min air pressure: 8Kpa Pressure adjustment: 1Kpa/grade Air intake pipe diameter:20.5mm Air intake pipe length:1.8m Wire Length: 3m Battery connector:Battery clip Noise Level(7m): 67dB Weight: 3kg Note: 1. Ensure reliable gas path links found leaks should be immediately shut down; otherwise it will damage the pump; 2. Do not sand, dust or debris into the air inlet; 3. Do not continue to use the air pump over 60 minutes, before cooling air pump, do not re-use; 4. Use the pump, make sure the battery away from the fuel tank, prohibition of reach of children; 5. Before use, you must check the pressure setting, do not make inflatable balloon filled with high pressure air. Cigarette lighters cannot withstand current 20A please directly connected to the car battery or self-made electric car battery 7. If you give inflatable rubber boats, set pressure is adjusted in scale 25 (or the corresponding pressure value), and the pneumatic pressure of the keel 30, if a drawing floor inflatable pressure was adjusted at 50. This product is a high pressure Pump set incorrectly can cause fatal worns. Please note that when wiring polarity, red is positive Use manual: Automatic electric pump uses a 12V DC power supply 20A maximum Current generally 20A car cigarette lighter can not withstand the current or directly connected to the car battery self-made electric car battery Please inflatable must be high before the whole good inflation pressure can be set by a black dial. If you give the inflatable rubber boats, set pressure adjustment in the scale 25 (or the corresponding pressure value), and The inflation pressure of the keel 35 If you give the inflatable inflatable drawing floor 60. The pressure in the pressure adjustment set incorrectly can cause fatal damage to the rubber boats. Automatic inflatable inflatable pump can also be pumped down a notch interface for pumping Interface Please note that the positive and negative wiring, the red is positive Automatic inflatable air pump principle is: first to inflatable boat (inflatable floor) inflated to 80% (no pressure) fan, then filled with live match Inflatable end, air pump will automatically stop working. Pull the inflatable pull mouth continue to the next inflatable chamber. Include: 1 x set of LCD Inflatable Pump GP80D. The item “LCD Rubber inflatable boat high pressure electric air pump 80KPA 12V DC GP80D Y” is in sale since Monday, May 7, 2018. This item is in the category “Sporting Goods\Water Sports\Kayaking, Canoeing & Rafting\Accessories”. The seller is “cncdealers” and is located in ShenZhen. This item can be shipped worldwide.
  • Brand: Unbranded
  • Type: Inflation Pump
  • MPN: Does Not Apply

LCD Rubber inflatable boat high pressure electric air pump 80KPA 12V DC GP80D Y

7.5′ inflatable dinghy boat with high pressure Air Floor Lightweight

7.5' inflatable dinghy boat with high pressure Air Floor Lightweight
7.5' inflatable dinghy boat with high pressure Air Floor Lightweight
7.5' inflatable dinghy boat with high pressure Air Floor Lightweight
7.5' inflatable dinghy boat with high pressure Air Floor Lightweight

7.5' inflatable dinghy boat with high pressure Air Floor Lightweight
7.5 ft inflatable boat DINGHY. 7.5′ inflatable dinghy boat with high pressure Air Floor Lightweight with second layer under the tubes. New Aquamarine redesigned GYC 230 7.5′ inflatable boat with HIGH PRESSURE iar floor. GYC series inflatable boats replace traditional classic wooden floorboards with a high-pressure inflatable floor. They are incredibly light and roomy. Boat handles, make carrying the boat a breeze. Special high presure inflatable floor can be rolled up inside the boat. The GYC 240 is the smallest of the inflatable boats with inflatable floor. It can hold up to two people with a maximum of 3Hp. An inflatable boat rolls up quickly into a light, compact bundle. The convenience of this alone makes them tempting, but there’s more. Dinghes are easily carried on a plane, or in a raft. They can be stored safely in a car trunk, there is no need for a roof rack. In short, you can take them anywhere The boat comes equipped with all of the standard features including foot pump, repair kit , carrying bags. + ALUMINUM SEAT BENCH. V shape hull with DOUBLE SIZE RUBBING stake UNDER the KEEL for extra bottom protection. SECOND LAYER OF PVC FABRIC ON THE BOTTOM OF THE TUBES. Max air pressure boat. 7’7 (230 cm). 5 ft (153 cm). 3+1 (Bow, Starboard, Portside)+Keel. 42” x 20 x 13. HIGH PRESSURE AIR Floor. These boats are made with an extremely rugged material that is very difficult to puncture or tear. Our Fabric is made with the STS (SOL Type System) process. This does not merely coat the internal reinforcement fabric with an outer layer, but forces the outer material into the thousands of tiny gaps in the base fabric weave to form a single homogenous material. PRODUCT INFORMATION AND DETAILS OF DESIGN. Stainless steel screw added fixture to reinforce connection between tubes and transom. ALUMINUM SEAT and NEW SEAT SLIDE-IN DESIGN. Once installed seat remains in place secure and sturdy. Reinforced DOUBLE SIZE RUBBING stake UNDER the KEEL for extra strength and durability where you need it most. Aids to protect your boat against debris , rocks and sandbars. EXTRA LAYER OF PVC coated material ON TRANSOM ATTACHMENT to better secure tube connection. FOLD DOWN LOCKING COLAPSIBLE OARS WITH OAR HOLDERS. It is handmade with high quality materials and carefully supervised during its manufacturing process. Hand sealed is the most reliable and traditional way to make perfect inflatable boat. 1- Inflatable Boat with High Pressure Air floor and keel. 1- Boat carrying bag. 1 -Set of oars (set of two). 1 -High Pressure Foot pump. 1 -Repair kit comes with 2 repair fabrics patches and 60g glue. 1- 16.2mm thickness aluminum bench seat. Local pick ups and BC residents will be charged HST(12%). CANADA (excluding YUKON, NT, NU territories). (excluding YUKON, NT, NU territories). UNITED STATES (excluding HI, PR, VI, GU, AK, APO/AFO). (excluding HI, PR, VI, GU, AK, APO/AFO). If any part becomes defective, return it for repair or no charge replacement. Guarantee begins when product is delivered. NOTE: Seams are considered to have delaminated when the outer coating separates from the fabric base or the seam lies its structural strength.. Neglect, lack of maintenance, accident, abnormal operation or improper installation or services; b. Use of an accessory or part not authorized by us; c. Participating in or preparing for racing or other competitive activity; d. Alteration or removal activity; 3. We reserve the right to improve the design of any product without assuming any obligation to modify any product previously manufactured. The item “7.5′ inflatable dinghy boat with high pressure Air Floor Lightweight” is in sale since Saturday, January 21, 2017. This item is in the category “Sporting Goods\Water Sports\Kayaking, Canoeing & Rafting\Inflatables”. The seller is “aquamarineboats” and is located in Vancouver, BC. This item can be shipped to Canada, United States.
  • Model: GYC230
  • Type: Pontoon
  • MPN: GYC230
  • Brand: Aquamarine

7.5' inflatable dinghy boat with high pressure Air Floor Lightweight

12V 20PSI Dual Stage Electric Air Pump for Inflatable Boat SUP High Pressure

12V 20PSI Dual Stage Electric Air Pump for Inflatable Boat SUP High Pressure
12V 20PSI Dual Stage Electric Air Pump for Inflatable Boat SUP High Pressure
12V 20PSI Dual Stage Electric Air Pump for Inflatable Boat SUP High Pressure
12V 20PSI Dual Stage Electric Air Pump for Inflatable Boat SUP High Pressure
12V 20PSI Dual Stage Electric Air Pump for Inflatable Boat SUP High Pressure
12V 20PSI Dual Stage Electric Air Pump for Inflatable Boat SUP High Pressure
12V 20PSI Dual Stage Electric Air Pump for Inflatable Boat SUP High Pressure
12V 20PSI Dual Stage Electric Air Pump for Inflatable Boat SUP High Pressure
12V 20PSI Dual Stage Electric Air Pump for Inflatable Boat SUP High Pressure
12V 20PSI Dual Stage Electric Air Pump for Inflatable Boat SUP High Pressure

12V 20PSI Dual Stage Electric Air Pump for Inflatable Boat SUP High Pressure
20PSI LCD Display Smart High Pressure 12V 10A Portable Quick-Fill Lifebuoy. Programmed intelligent digital controller for dual stage inflation and LCD display. Major parts made of marine grade engineered ABS and Nylon material for durability. 1st stage max speed 350L/min; 2nd stage max speed 70L/min, Pressure setting increments 0.5 PSI and support up to 20PSI. Built-in sand filter for air intake & pump cooling system. Super light weight 4Lbs and small size with easy carry handle. Pump Support Rate: 0.5-20 PSI (0.034-1.378 Bar). Digital Sensor Accuracy: 0.01 PSI. Controller Method: Pre-programmed digital controller board. Max Pumping Speed: 350L/min at 1st Stage, 70L/min at 2nd stage. Pump Stage 1: Sealed and quiet turbo fan for high volume inflation. Pump Stage 2: Engineered cylinder type compressor for high pressure. Dual Inflators Switch Point: 0.65 PSI. O Ring Thickness: 0.3mm / 0.5mm / 0.6mm. Sand Filter: Dual filters for air intake and pump cooling. Pump Working Voltage: 11-14V DC. Max Energy Consumption: 10A, 110W (12V). DC Power Cord Length: 9ft (2.75m). Air Hose: 4ft Length & with HR Valve Adaptors. Please list your special requests color, packages, etc. The images shown are not the actual item and are for your reference only. SERVICE TRANSIT TIME is provided by the carrier and excludes weekends and holidays. Transit times may vary, particularly during the holiday season. Other countries or remote areas may take longer. For defective items (excluding items damaged and/or misused after receipt). It from the date it was received. In the original packaging. Specific reason for the return, and. OR, you may choose to have a replacement. Our office hours are: 9:00 a. M to 6:00 p. M (GMT +8) of Monday to Saturday. And our office is closed on Sunday and public holidays (China). We apologize for the late reply during the holidays. Feedback is very important to us. Excludes weekends and holidays. If you are satisfied with our products and service. Please do not forget to leave a good review to us, thanks! The item “12V 20PSI Dual Stage Electric Air Pump for Inflatable Boat SUP High Pressure” is in sale since Friday, April 26, 2019. This item is in the category “Sporting Goods\Water Sports\Kayaking, Canoeing & Rafting\Accessories”. The seller is “eoug6007″ and is located in SZ. This item can be shipped worldwide.
  • Brand: vastfire
  • Country/Region of Manufacture: China
  • DC Power Cord Length: 9ft (2.75m)
  • Digital Sensor Accuracy: 0.01 PSI
  • Max Energy Consumption: 10A, 110W (12V)
  • Max Pumping Speed: 350L/min at 1st Stage, 70L/min at 2nd stage
  • Model: HT-782
  • MPN: QX10B535US
  • O Ring Thickness: 0.3mm / 0.5mm / 0.6mm
  • Pump Support Rate: 0.5-20 PSI (0.034-1.378 Bar)
  • Pump Working Voltage: 11-14V DC
  • Type: Inflation Pump

12V 20PSI Dual Stage Electric Air Pump for Inflatable Boat SUP High Pressure

High! Pressure Air Pump-12v Electric for Inflatable Boats Rafts Kayaks Kite

High! Pressure Air Pump-12v Electric for Inflatable Boats Rafts Kayaks Kite
High! Pressure Air Pump-12v Electric for Inflatable Boats Rafts Kayaks Kite
High! Pressure Air Pump-12v Electric for Inflatable Boats Rafts Kayaks Kite
High! Pressure Air Pump-12v Electric for Inflatable Boats Rafts Kayaks Kite
High! Pressure Air Pump-12v Electric for Inflatable Boats Rafts Kayaks Kite
High! Pressure Air Pump-12v Electric for Inflatable Boats Rafts Kayaks Kite

High! Pressure Air Pump-12v Electric for Inflatable Boats Rafts Kayaks Kite
High-Pressure Air Pump-12v Electric for Inflatable Boats Rafts Kayaks Kite. OUR GOAL IS TO MAKE YOU SMILE AND HAPPY!! KITE ADAPTERS ARE NOT INCLUDED BY DEFAULT. PLEASE LET US KNOW IF YOU NEED THEM. ADAPTERS INCLUDED IN THE PACKAGE ARE – 8 PIECE STANDARD MULTI VALVE ADAPTERS + 1 ADAPTER FOR HALKEY-ROBERTS VALVE. High-Pressure 12 psi Electric Pump with Analog Gauge for Inflatable Boats, Rafts, Kayaks, SUPs, etc. Our high-pressure Analog Gauge NEW Inflator Pumps are a incredible dual action, automatic, 12 volt pump developed in Australia. Designed to blowup inflatable boats with no effort at all. Just set the pressure gauge and press the ON Button. The pump will then inflate your boat to its correct pressure and stop automatically. Analog Gauge Air Pump is perfect product for. Drop-stitch high-pressure air floors. Inflatable stand up paddleboards. Inflatable fenders, and many more inflatable products.. Analog Gauge High Pressure Air Pump features include. High Speed, High-Pressure pump. Air pressure readings in KPa. Automatic Stop when chosen pressure is reached. Reliable combination of Turbine & Piston to reduce wear. Gator clips for quick connection to the 12V car battery. All necessary adapters are included to fit most air valves. FREE soft carry bag with storage compartments and carry strap. Our high-pressure Analog Gauge NEW inflation pumps are adjustable from 2.2 PSI up to a maximum of 12 PSI. By delivering around 200 liters/minute, electric pump will inflate a typical 14′ boat in about 8-10 minutes. High-pressure inflation pump automatically stops at the pressure level that you select and is also ideal for deflating. It comes with crocodile clips to connect to a 12V battery as well as a set of generic multi valve adapters. Once you’ve used one of these pumps, you’ll never manually pump your boat again, because you no longer need a hand pump! These pumps are not only excellent for quickly inflating boats and rafts, but also great for quickly filling inflatable high-pressure air deck floors and stand up paddle boards to up to 10-12psi air pressure. Without a high-pressure electric inflator, you’d have to use a hand pump for around 15-20 minutes, under the hot sun, which might not be your idea of fun. With this magic pump, you will be ready to roll in under 10 minutes with no effort at all. All high-pressure air pumps now come equipped with a set of generic plastic adapters designed to fit most of air valves on a market and Deluxe valve adapter designed to fit Saturn’s Naru valves. Choose correct adapter that will fit nicely into air valve, and will press pushpin down when inserted for proper inflation. After inflation, when adapter is removed, valve will lock automatically preventing air from escaping. You don’t need any other valve adapters besides those that already provided with our electric air pump. Our Air Pumps can be used with a regular 12V Car Battery or with much smaller 12V 7Ah Sealed Lead Acid Batteries that are widely available on Internet along with wall chargers. Just place 12V 7Ah battery into a small soft cooler bag, and connect pump’s gator cables to use anywhere. These are same 12V 7Ah batteries that were used in our Deluxe model of electric pump shown in a video below. Digital High-Pressure Electric Pump for 12V battery. How the pump works: When the pump starts it will be on a HIGH VOLUME (Turbine) pump until the pressure reaches 2-3 PSI. Then the pump will automatically switch over to the HIGH PRESSURE (Piston) pump and inflate the boat to its set pressure. Once reaching the set pressure the pump will automatically turn itself off. 12 PSI / 80 KPa. 1.5 PSI / 10 KPa. Air intake pipe Diametre. 67 dB / 7M. SATURN INFLATABLE BOATS CANADA. We will leave feedback after any deals completed. We implore you to not leave negative or neutral feedback without talking to us first! The item “High! Pressure Air Pump-12v Electric for Inflatable Boats Rafts Kayaks Kite” is in sale since Wednesday, October 29, 2014. This item is in the category “Sporting Goods\Water Sports\Kayaking, Canoeing & Rafting\Accessories”. The seller is “utka7676″ and is located in Mississauga, Ontario. This item can be shipped to United States, Canada.
  • Country of Manufacture: China
  • Model: GP-80
  • Country/Region of Manufacture: China
  • Type: Inflation Pump
  • MPN: GP-80
  • Brand: SATURN

High! Pressure Air Pump-12v Electric for Inflatable Boats Rafts Kayaks Kite

Electric PUMP for Inflatable Boats Rafts Kayaks Kite High Pressure Air11 PSI 12v

Electric PUMP for Inflatable Boats Rafts Kayaks Kite High Pressure Air11 PSI 12v
Electric PUMP for Inflatable Boats Rafts Kayaks Kite High Pressure Air11 PSI 12v
Electric PUMP for Inflatable Boats Rafts Kayaks Kite High Pressure Air11 PSI 12v
Electric PUMP for Inflatable Boats Rafts Kayaks Kite High Pressure Air11 PSI 12v
Electric PUMP for Inflatable Boats Rafts Kayaks Kite High Pressure Air11 PSI 12v
Electric PUMP for Inflatable Boats Rafts Kayaks Kite High Pressure Air11 PSI 12v

Electric PUMP for Inflatable Boats Rafts Kayaks Kite High Pressure Air11 PSI 12v
Electric PUMP for Inflatable Boats Rafts Kayaks Kite, INFLATOR 12 volts. The 12-Volt High Speed Air Pump /inflator for inflatable boats and kayaks is powerful and reliable and has a built in cut off-switch that automatically turns pump off when the desired air pressure is reached. Low Pressure: High volume turbo fan; Max Inlet air: 500L/ Min. High pressure: Dual cylinders for high pressure, Max 11 PSI. Automatic working stage switching Auto stop when reaching setting pressure. Pressure setting increments: Per 1 Kpa (Per 0.15PSI) Pump support intake & outtake / inflate & deflate dual actions 8ft Power cord, 6ft Pump hose, HR valve Adapter. High ressure electric pump can be used for Inflatable boats , Inflatable rafts , Kite board sails Inflatable kayaks, Heavy duty air mattress, Inflatable iSUP Stand up paddleboards. How the pump works: When the pump starts it will be on a HIGH VOLUME (Turbine) pump until the pressure reaches 2-3 PSI. Then the pump will automatically switch over to the HIGH PRESSURE (Piston) pump and inflate the boat to its set pressure. Once reaching the set pressure the pump will automatically turn itself off. Two stage 12 volts electric pump for inflatable boats. Set of generic plastic adapters designed to fit most of air valves. Soft carry bag with storage compartments and carry strap. One HALKEY ROBERTS adapter with 2 silicone gaskets. 6 ft long Cable with gator clips to connect to external battery 6 ft flex hose. The item “Electric PUMP for Inflatable Boats Rafts Kayaks Kite High Pressure Air11 PSI 12v” is in sale since Tuesday, February 11, 2014. This item is in the category “Sporting Goods\Water Sports\Kayaking, Canoeing & Rafting\Accessories”. The seller is “aquamarineboats” and is located in Vancouver, BC. This item can be shipped to Canada, United States.
  • Brand: AQUAMARINE
  • MPN: 80DB
  • Type: PUMP

Electric PUMP for Inflatable Boats Rafts Kayaks Kite High Pressure Air11 PSI 12v

14 ft whitewater river raft Inflatable raft with High Pressure air floor

14 ft whitewater river raft Inflatable raft with High Pressure air floor
14 ft whitewater river raft Inflatable raft with High Pressure air floor
14 ft whitewater river raft Inflatable raft with High Pressure air floor
14 ft whitewater river raft Inflatable raft with High Pressure air floor
14 ft whitewater river raft Inflatable raft with High Pressure air floor
14 ft whitewater river raft Inflatable raft with High Pressure air floor
14 ft whitewater river raft Inflatable raft with High Pressure air floor

14 ft whitewater river raft Inflatable raft with High Pressure air floor
Our river raft will last and serve you on many great adventures. It has a pronounced rocker, but can easily be paddled in a straight line in calm water. It Includes 3 REMOVABLE thwarts , foot pump and nylon carry bag. Hull and floor are made of durable puncture resistant PVC. A self bailing system that will drain the water away quickly once you get moving. INFLATABLE RIVER RAFT COMES with REMOVABLE HIGH PRESSSURE AIR FLOOR. Make sure you get proper safety gear with the raft, especially whether you have enough life vests. The boat comes equipped with all of the standard features including foot pump, repair kit , carrying bags. River rafting is an inherently dangerous activity that can result in serious injury or death. We recommend that you seek proper training and equipment before attempting this activity. Max air pressure boat. Main chambers -3.5 psi (0.24 bar). The item “14 ft whitewater river raft Inflatable raft with High Pressure air floor” is in sale since Thursday, July 7, 2016. This item is in the category “Sporting Goods\Water Sports\Kayaking, Canoeing & Rafting\Inflatables”. The seller is “aquamarineboats” and is located in Vancouver, BC. This item can be shipped to Canada, United States.
  • Model: 763985862628
  • Type: Raft
  • MPN: BPQ430
  • Brand: AQUAMARINE

14 ft whitewater river raft Inflatable raft with High Pressure air floor