4 Stage 45000PSI Hand Air Pump High Pressure Gauge Diving Oxygen Tank Refill PCP

4 Stage 45000PSI Hand Air Pump High Pressure Gauge Diving Oxygen Tank Refill PCP
4 Stage 45000PSI Hand Air Pump High Pressure Gauge Diving Oxygen Tank Refill PCP
4 Stage 45000PSI Hand Air Pump High Pressure Gauge Diving Oxygen Tank Refill PCP
4 Stage 45000PSI Hand Air Pump High Pressure Gauge Diving Oxygen Tank Refill PCP
4 Stage 45000PSI Hand Air Pump High Pressure Gauge Diving Oxygen Tank Refill PCP
4 Stage 45000PSI Hand Air Pump High Pressure Gauge Diving Oxygen Tank Refill PCP
4 Stage 45000PSI Hand Air Pump High Pressure Gauge Diving Oxygen Tank Refill PCP
4 Stage 45000PSI Hand Air Pump High Pressure Gauge Diving Oxygen Tank Refill PCP
4 Stage 45000PSI Hand Air Pump High Pressure Gauge Diving Oxygen Tank Refill PCP
4 Stage 45000PSI Hand Air Pump High Pressure Gauge Diving Oxygen Tank Refill PCP
4 Stage 45000PSI Hand Air Pump High Pressure Gauge Diving Oxygen Tank Refill PCP

4 Stage 45000PSI Hand Air Pump High Pressure Gauge Diving Oxygen Tank Refill PCP
HIGH PRESSURE WITH SAFETY. High pressure goes up to 4500psi; copper female connector sealed by polyfluorene ensures leak-free performance; 21.7 flexible micro-bore hose can bear up to 63MPA pressure, safeguarding your safety with superior quality. DURABLE WITH SMOOTH MOTION. Sleek stainless steel construction brings smooth upward and downwards motion; 8mm copper female quick connector allows this pump to withstand over 10,000 times of tear and wear. Comes with oil and water separator for convenient operation; TPR padded grips for fatigue-free hand feelings, large gauge provides easy-to-read parameters. COMPACT & FOLDABLE FOR EASY STORAGE. 5mm foldable pedal for easy storage and transport, perfect to carry it around in your vehicle for unexpected use. Precisely shows the pressure with no air leaking, you can know when to stop inflating. Use top-grade material, anti-crack, low temperature is not easy to crisp. Tighten the pressure relief screw before inflating air (clockwise). Loosen the pressure relief screw to release the air after inflation completed. Make sure the tightness before using it. Make sure the high tightness between the connector and the air tank to avoid leaking. (Refer to the manual). Connect the high-pressure pump to the scuba tank. Close the pressure relief valve. Start to inflate and stop inflating when the air pressure reaches to 3000 psi or 200 bar. Open the pressure relief valve to relieve pressure. Pull out the scuba tank, and the inflation is completed. Net weight: about 2.5KG/5.51 Pounds. 61.5cm/24.21 inch. 25.6cm/10.08 inch. Air tube range: approx. Separator (L x W): approx. 9 x 3.1cm/3.54 x 1.22 inch. 1 Set of Accessories. We highly recommend inflating your air tank by air compressor machine, the air pump just for emergency use. If you encounter any trouble. Please give us an opportunity to resolve any problems. We understand the concerns and frustrations you might have and we will try our best to service for you. We care about our valued customers and want to build a long-term business relationship with you, so please help us to make better. Welcome to our store! If you were not satisfied when you have received the item(s), please return it/them. Please contact me before you return it;If you do not receive the itemwe offer a. If you are willing return item back to us, please keep it in original package. We value your feedback so we will endeavor to respond to all inquiries. & Public holiday excluded. We would like to earn your. Your action will help us offer our milk and bread. The item “4 Stage 45000PSI Hand Air Pump High Pressure Gauge Diving Oxygen Tank Refill PCP” is in sale since Tuesday, September 15, 2020. This item is in the category “Sporting Goods\Water Sports\Scuba & Snorkeling\Tanks”. The seller is “noble_coo” and is located in ShenZhen. This item can be shipped to United States, all countries in continental Asia, Canada, Mexico.
  • Air tube range: approx. 53cm/20.87 inch
  • Brand: Unbranded
  • Bundle Description: Hand Pump + Accessories
  • Connector: 8mm Female Quick Connector
  • Custom Bundle: No
  • Display: Pressure Gauge
  • Efficiency: 6-7 min (0.5L Tank)
  • Handle length: approx. 25.6cm/10.08 inch
  • Hose length: approx. 62cm/24.41 inch
  • Material: Stainless Steel
  • Measuring Range: 0-40MPA
  • Modified Item: No
  • MPN: Does Not Apply
  • Net weight: about 2.5KG/5.51 Pounds
  • Pressure Grade: 4500psi
  • Separator (L x W): approx. 9 x 3.1cm/3.54 x 1.22 inch
  • Total length: approx. 61.5cm/24.21 inch

4 Stage 45000PSI Hand Air Pump High Pressure Gauge Diving Oxygen Tank Refill PCP

4 Stage 60000PSI Hand Pump High Pressure Gauge Diving Oxygen Air Tank Rifle PCP

4 Stage 60000PSI Hand Pump High Pressure Gauge Diving Oxygen Air Tank Rifle PCP
4 Stage 60000PSI Hand Pump High Pressure Gauge Diving Oxygen Air Tank Rifle PCP
4 Stage 60000PSI Hand Pump High Pressure Gauge Diving Oxygen Air Tank Rifle PCP
4 Stage 60000PSI Hand Pump High Pressure Gauge Diving Oxygen Air Tank Rifle PCP
4 Stage 60000PSI Hand Pump High Pressure Gauge Diving Oxygen Air Tank Rifle PCP
4 Stage 60000PSI Hand Pump High Pressure Gauge Diving Oxygen Air Tank Rifle PCP
4 Stage 60000PSI Hand Pump High Pressure Gauge Diving Oxygen Air Tank Rifle PCP
4 Stage 60000PSI Hand Pump High Pressure Gauge Diving Oxygen Air Tank Rifle PCP
4 Stage 60000PSI Hand Pump High Pressure Gauge Diving Oxygen Air Tank Rifle PCP
4 Stage 60000PSI Hand Pump High Pressure Gauge Diving Oxygen Air Tank Rifle PCP

4 Stage 60000PSI Hand Pump High Pressure Gauge Diving Oxygen Air Tank Rifle PCP
1# High Pressure Hand Air Pump. Made of high quality stainless steel, anti-rust and durable for long lasting. High pressure air pump by hand, with oil-water separator, compress dry and clean air into oxygen cylinder. With ergonomic design, easy to pump, convenient to operate, time-saving and labor-saving. With a pressure gauge on it, you can know when to stop inflating. Come with practical accessory for quick and easy use. Tighten the pressure relief screw before pumping up (tighten clockwise); loosen the pressure relief screw after pumping up (tighten counterclockwise). Non-explosive tube: it’s made of imported material, and with its 63MPA pressure resistant design, it is not easy to brittle in the condition of the temperature of -30°. Oil-water separator: make the gas more pure. It takes about 15 to 20 minutes to fill a 0.5L oxygen cylinder about pumping up 600 times. How to use: Please perform the pump test according to the instructions and follow the steps to pump. Working pressure: 0-40MPA (0-6000PSi). Connector type: 8MM female. Air Tube Length: Approx. 53cm / 20.9in. Connector Diameter: 3.1cm / 1.2in. Connector Length: 9.9cm / 3.9 in. Package Size: 64x 17.5 x 6 cm/ 25.19 x 6.88 x 2.36inch. 3340g/ 117.81 oz. 1 x High-pressure air pump. 3 Pack x Accessories. Cylindrical filter, sponge filter, hexagonal tool, test plug, car connector. Pump base, first-stage piston O-ring, third-stage piston, piston bead, piston head, gasket, activated carbon filter. The high-pressure air pump is a backup air source. Only as a last resort should you use it. Before use, please perform the inflation test according to the instructions and refer to the relevant steps to inflate. 0.5L oxygen cylinder requires about 600 pumps. After testing, Only two adult men take turns pumping for 15-20 minutes, can the oxygen cylinder be filled up. The pumping efficiency is increased by 20%. 24 pumps = 1MPA, so you can lose weight during pumping. During the pumping process, the high-pressure pump generates heat due to friction, so it is normal for the tube to heat up, but be careful with this condition. 2# Only Scuba Adaptor with Hose. High pressure hose with stainless steel spring protector. Higher pressure resistance This fill station Knob type exhaust valve, exhaust is very smooth The DIN fitting(G5/8) will fit diving cylinders. The hose terminates with 8mm stainless quick coupler socket 8mm Ball Type LockDurable And Easy to aperate. Specifications: Material: aluminium alloy+ stainless steel Hose Length: 50cm / 19.7inch W. P: 160MPa/1600Bar/23206PSI Thread: DIN(G5/8) Hose quick coupler Thread: 8mm Weight: 290g Packing size: 18124cm. Package Includes: 1 x Scuba Adaptor with Hose. If you encounter any trouble. Please give us an opportunity to resolve any problems. We understand the concerns and frustrations you might have and we will try our best to service for you. We care about our valued customers and want to build a long-term business relationship with you, so please help us to make better. Welcome to our store! If you were not satisfied when you have received the item(s), please return it/them. Please contact me before you return it;If you do not receive the itemwe offer a. If you are willing return item back to us, please keep it in original package. We value your feedback so we will endeavor to respond to all inquiries. & Public holiday excluded. We would like to earn your. Your action will help us offer our milk and bread. The item “4 Stage 60000PSI Hand Pump High Pressure Gauge Diving Oxygen Air Tank Rifle PCP” is in sale since Wednesday, August 5, 2020. This item is in the category “Sporting Goods\Scuba & Snorkelling\Cylinders & Tanks”. The seller is “dst-dd” and is located in ShenZhen. This item can be shipped to all countries in Europe, all countries in continental Asia, Canada.
  • Air Tube Length: Approx. 53cm / 20.9in
  • Brand: Unbranded
  • Come with practical accessory: For quick and easy use
  • Connector Diameter: 3.1cm / 1.2in
  • Connector Length:: 9.9cm / 3.9in
  • Connector type: 8MM female
  • Country/Region of Manufacture: China
  • Custom Bundle: No
  • DURABLE WITH SMOOTH MOTION: sleek stainless steel
  • HIGH PRESSURE WITH SAFETY: high pressure goes up to 60000psi
  • Main Function: The pumping efficiency is increased by 20%
  • Material: Stainless Steel
  • Model: High-pressure air pump
  • Modified Item: No
  • MPN: Does Not Apply
  • OIL-WATER SEPARATOR: make the gas more pure
  • Package Size: 64×17.5×6 cm/25.19×6.88×2.36inch
  • Package Weight: Approx. 3340g/117.81oz
  • Stage: 4 Stage
  • With a pressure gauge on it: You can know when to stop inflating.
  • With ergonomic design: Easy to pump, convenient to operate, time-saving and labor-saving
  • Working pressure: 0-40MPA (0-6000PSi)

4 Stage 60000PSI Hand Pump High Pressure Gauge Diving Oxygen Air Tank Rifle PCP

4 Stage 6000PSI PCP Air Tank High Pressure Hand Pump Hunting Scuba Diving Oxygen

4 Stage 6000PSI PCP Air Tank High Pressure Hand Pump Hunting Scuba Diving Oxygen
4 Stage 6000PSI PCP Air Tank High Pressure Hand Pump Hunting Scuba Diving Oxygen
4 Stage 6000PSI PCP Air Tank High Pressure Hand Pump Hunting Scuba Diving Oxygen
4 Stage 6000PSI PCP Air Tank High Pressure Hand Pump Hunting Scuba Diving Oxygen
4 Stage 6000PSI PCP Air Tank High Pressure Hand Pump Hunting Scuba Diving Oxygen
4 Stage 6000PSI PCP Air Tank High Pressure Hand Pump Hunting Scuba Diving Oxygen
4 Stage 6000PSI PCP Air Tank High Pressure Hand Pump Hunting Scuba Diving Oxygen
4 Stage 6000PSI PCP Air Tank High Pressure Hand Pump Hunting Scuba Diving Oxygen
4 Stage 6000PSI PCP Air Tank High Pressure Hand Pump Hunting Scuba Diving Oxygen
4 Stage 6000PSI PCP Air Tank High Pressure Hand Pump Hunting Scuba Diving Oxygen
4 Stage 6000PSI PCP Air Tank High Pressure Hand Pump Hunting Scuba Diving Oxygen
4 Stage 6000PSI PCP Air Tank High Pressure Hand Pump Hunting Scuba Diving Oxygen

4 Stage 6000PSI PCP Air Tank High Pressure Hand Pump Hunting Scuba Diving Oxygen
4 Stage 6000PSI PCP Air Tank High Pressure Hand Pump Hunting Scuba Diving Oxygen. Made of high quality stainless steel, anti-rust and durable for long lasting. High pressure air pump by hand, with oil-water separator, compress dry and clean air into oxygen cylinder. With ergonomic design, easy to pump, convenient to operate, time-saving and labor-saving. With a pressure gauge on it, you can know when to stop inflating. Come with practical accessory for quick and easy use. Tighten the pressure relief screw before pumping up (tighten clockwise); loosen the pressure relief screw after pumping up (tighten counterclockwise). Non-explosive tube: it’s made of imported material, and with its 63MPA pressure resistant design, it is not easy to brittle in the condition of the temperature of -30°. Oil-water separator: make the gas more pure. It takes about 15 to 20 minutes to fill a 0.5L oxygen cylinder about pumping up 600 times. How to use: Please perform the pump test according to the instructions and follow the steps to pump. Working pressure: 0-40MPA (0-6000PSi). Connector type: 8MM female. Air Tube Length: Approx. 53cm / 20.9in. Connector Diameter: 3.1cm / 1.2in. Connector Length: 9.9cm / 3.9 in. Package Size: 64x 17.5 x 6 cm/ 25.19 x 6.88 x 2.36inch. 3340g/ 117.81 oz. 1 x High-pressure air pump. 3 Pack x Accessories. Cylindrical filter, sponge filter, hexagonal tool, test plug, car connector. Pump base, first-stage piston O-ring, third-stage piston, piston bead, piston head, gasket, activated carbon filter. The high-pressure air pump is a backup air source. Only as a last resort should you use it. Before use, please perform the inflation test according to the instructions and refer to the relevant steps to inflate. 0.5L oxygen cylinder requires about 600 pumps. After testing, Only two adult men take turns pumping for 15-20 minutes, can the oxygen cylinder be filled up. The pumping efficiency is increased by 20%. 24 pumps = 1MPA, so you can lose weight during pumping. During the pumping process, the high-pressure pump generates heat due to friction, so it is normal for the tube to heat up, but be careful with this condition. If you encounter any trouble. Please give us an opportunity to resolve any problems. We understand the concerns and frustrations you might have and we will try our best to service for you. We care about our valued customers and want to build a long-term business relationship with you, so please help us to make better. The item “4 Stage 6000PSI PCP Air Tank High Pressure Hand Pump Hunting Scuba Diving Oxygen” is in sale since Wednesday, August 5, 2020. This item is in the category “Sporting Goods\Scuba & Snorkelling\Cylinders & Tanks”. The seller is “bloomyield_inc” and is located in ShenZhen. This item can be shipped to all countries in Europe, all countries in continental Asia, Canada.
  • Air Tube Length: Approx. 53cm / 20.9in
  • Brand: Unbranded
  • Connector Diameter: 3.1cm / 1.2in
  • Connector Length:: 9.9cm / 3.9in
  • Connector type: 8MM female
  • Country/Region of Manufacture: China
  • Custom Bundle: No
  • Material: Stainless Steel
  • Modified Item: No
  • MPN: Does Not Apply
  • Package Size: 64×17.5×6 cm/25.19×6.88×2.36inch
  • Package Weight: Approx. 3340g/117.81oz
  • Working pressure: 0-40MPA (0-6000PSi)

4 Stage 6000PSI PCP Air Tank High Pressure Hand Pump Hunting Scuba Diving Oxygen

Diving Oxygen Cylinder Air Pump High Pressure Scuba Air Tank Inflator Dive Tool

Diving Oxygen Cylinder Air Pump High Pressure Scuba Air Tank Inflator Dive Tool
Diving Oxygen Cylinder Air Pump High Pressure Scuba Air Tank Inflator Dive Tool
Diving Oxygen Cylinder Air Pump High Pressure Scuba Air Tank Inflator Dive Tool
Diving Oxygen Cylinder Air Pump High Pressure Scuba Air Tank Inflator Dive Tool
Diving Oxygen Cylinder Air Pump High Pressure Scuba Air Tank Inflator Dive Tool
Diving Oxygen Cylinder Air Pump High Pressure Scuba Air Tank Inflator Dive Tool
Diving Oxygen Cylinder Air Pump High Pressure Scuba Air Tank Inflator Dive Tool
Diving Oxygen Cylinder Air Pump High Pressure Scuba Air Tank Inflator Dive Tool
Diving Oxygen Cylinder Air Pump High Pressure Scuba Air Tank Inflator Dive Tool
Diving Oxygen Cylinder Air Pump High Pressure Scuba Air Tank Inflator Dive Tool
Diving Oxygen Cylinder Air Pump High Pressure Scuba Air Tank Inflator Dive Tool
Diving Oxygen Cylinder Air Pump High Pressure Scuba Air Tank Inflator Dive Tool

Diving Oxygen Cylinder Air Pump High Pressure Scuba Air Tank Inflator Dive Tool
Diving Oxygen Cylinder Air Pump High Pressure Scuba Air Tank Inflator Dive Tool. Made of high quality stainless steel, anti-rust and durable for long lasting. High pressure air pump by hand, with oil-water separator, compress dry and clean air into oxygen cylinder. With ergonomic design, easy to pump, convenient to operate, time-saving and labor-saving. With a pressure gauge on it, you can know when to stop inflating. Come with practical accessory for quick and easy use. Tighten the pressure relief screw before pumping up (tighten clockwise); loosen the pressure relief screw after pumping up (tighten counterclockwise). Non-explosive tube: it’s made of imported material, and with its 63MPA pressure resistant design, it is not easy to brittle in the condition of the temperature of -30°. Oil-water separator: make the gas more pure. It takes about 15 to 20 minutes to fill a 0.5L oxygen cylinder about pumping up 600 times. How to use: Please perform the pump test according to the instructions and follow the steps to pump. Working pressure: 0-40MPA (0-6000PSi). Connector type: 8MM female. Air Tube Length: Approx. 53cm / 20.9in. Connector Diameter: 3.1cm / 1.2in. Connector Length: 9.9cm / 3.9 in. Package Size: 64x 17.5 x 6 cm/ 25.19 x 6.88 x 2.36inch. 3340g/ 117.81 oz. 1 x High-pressure air pump. 3 Pack x Accessories. Cylindrical filter, sponge filter, hexagonal tool, test plug, car connector. Pump base, first-stage piston O-ring, third-stage piston, piston bead, piston head, gasket, activated carbon filter. The high-pressure air pump is a backup air source. Only as a last resort should you use it. Before use, please perform the inflation test according to the instructions and refer to the relevant steps to inflate. 0.5L oxygen cylinder requires about 600 pumps. After testing, Only two adult men take turns pumping for 15-20 minutes, can the oxygen cylinder be filled up. The pumping efficiency is increased by 20%. 24 pumps = 1MPA, so you can lose weight during pumping. During the pumping process, the high-pressure pump generates heat due to friction, so it is normal for the tube to heat up, but be careful with this condition. (except weekends and holidays). The item “Diving Oxygen Cylinder Air Pump High Pressure Scuba Air Tank Inflator Dive Tool” is in sale since Tuesday, September 8, 2020. This item is in the category “Sporting Goods\Water Sports\Scuba & Snorkeling\Tanks”. The seller is “yi-hsbt” and is located in ShenZhen. This item can be shipped to United States, all countries in continental Asia, Canada, Mexico.
  • Air Tube Length: Approx. 53cm / 20.9in
  • Brand: Unbranded
  • Connector Diameter: 3.1cm / 1.2in
  • Connector Length:: 9.9cm / 3.9in
  • Connector type: 8MM female
  • Main Function: The pumping efficiency is increased by 20%
  • Material: Stainless Steel
  • Model: High-pressure air pump
  • Modified Item: No
  • MPN: Does Not Apply
  • Package Size: 64×17.5×6 cm/25.19×6.88×2.36inch
  • Package Weight: Approx. 3340g/117.81oz
  • Stage: 4 Stage
  • Working pressure: 0-40MPA (0-6000PSi)

Diving Oxygen Cylinder Air Pump High Pressure Scuba Air Tank Inflator Dive Tool

NEW 72 Oxygen Compatible 3,000 PSI Stainless Steel High Pressure Hose Whip

NEW 72 Oxygen Compatible 3,000 PSI Stainless Steel High Pressure Hose Whip
NEW 72 Oxygen Compatible 3,000 PSI Stainless Steel High Pressure Hose Whip

NEW 72 Oxygen Compatible 3,000 PSI Stainless Steel High Pressure Hose Whip
This industrial grade1/4 I. X 72 long high pressure hose is precision engineered from braided 304 stainless steel for OMG / Oxygen Materials Group and has a working pressure of 3,000 PSI. It is highly flexible and will conform to a 3 radius curve. It is oxygen-clean with a teflon coated interior that is safe for use with all noncorrosive / nonflammable gases including oxygen, nitrogen, argon, carbon dioxide, etc. Each end features a 1/4 right-hand NPT female fitting of solid brass. To ensure a leak-proof seal we include a COMPLIMENTARY roll of oxygen-safe thread sealant for use with all noncorrosive gases and liquids. This hose ships fast and free from our centrally located Utah warehouse. Compare quality to national brands Western Enterprises but at a much lower price point. Ships fast and free from Utah. Track Page Views With. Auctiva’s FREE Counter. The item “NEW 72 Oxygen Compatible 3,000 PSI Stainless Steel High Pressure Hose Whip” is in sale since Sunday, December 9, 2018. This item is in the category “Business & Industrial\Hydraulics, Pneumatics, Pumps & Plumbing\Valves & Manifolds\Other Valves & Manifolds”. The seller is “oxygenmaterialsgroup” and is located in South Jordan, Utah. This item can be shipped worldwide.
  • Brand: OMG / Oxygen Materials Group
  • Suitable For: oxygen / noncorrosive gases.
  • Type: oxygen / compressed gas pigtail hose
  • Connection Size: 1/4″ NPT
  • Material: braided Stainless Steel
  • Country/Region of Manufacture: Unknown
  • Thread: 1/4″ Female Right Hand Pipe Thread
  • Connection: 1/4″ NPT
  • Suitable Media: Air
  • MPN: Does Not Apply

NEW 72 Oxygen Compatible 3,000 PSI Stainless Steel High Pressure Hose Whip

6000PSI 4 Stage PCP Airgun Rifle High Pressure Hand Pump Oxygen Air Tank Refill

6000PSI 4 Stage PCP Airgun Rifle High Pressure Hand Pump Oxygen Air Tank Refill
6000PSI 4 Stage PCP Airgun Rifle High Pressure Hand Pump Oxygen Air Tank Refill
6000PSI 4 Stage PCP Airgun Rifle High Pressure Hand Pump Oxygen Air Tank Refill
6000PSI 4 Stage PCP Airgun Rifle High Pressure Hand Pump Oxygen Air Tank Refill
6000PSI 4 Stage PCP Airgun Rifle High Pressure Hand Pump Oxygen Air Tank Refill
6000PSI 4 Stage PCP Airgun Rifle High Pressure Hand Pump Oxygen Air Tank Refill
6000PSI 4 Stage PCP Airgun Rifle High Pressure Hand Pump Oxygen Air Tank Refill
6000PSI 4 Stage PCP Airgun Rifle High Pressure Hand Pump Oxygen Air Tank Refill
6000PSI 4 Stage PCP Airgun Rifle High Pressure Hand Pump Oxygen Air Tank Refill
6000PSI 4 Stage PCP Airgun Rifle High Pressure Hand Pump Oxygen Air Tank Refill
6000PSI 4 Stage PCP Airgun Rifle High Pressure Hand Pump Oxygen Air Tank Refill

6000PSI 4 Stage PCP Airgun Rifle High Pressure Hand Pump Oxygen Air Tank Refill
6000PSI 4 Stage PCP Airgun Rifle High Pressure Hand Pump Oxygen Air Tank Refill. Made of high quality stainless steel, anti-rust and durable for long lasting. High pressure air pump by hand, with oil-water separator, compress dry and clean air into oxygen cylinder. With ergonomic design, easy to pump, convenient to operate, time-saving and labor-saving. With a pressure gauge on it, you can know when to stop inflating. Come with practical accessory for quick and easy use. Tighten the pressure relief screw before pumping up (tighten clockwise); loosen the pressure relief screw after pumping up (tighten counterclockwise). Non-explosive tube: it’s made of imported material, and with its 63MPA pressure resistant design, it is not easy to brittle in the condition of the temperature of -30°. Oil-water separator: make the gas more pure. It takes about 15 to 20 minutes to fill a 0.5L oxygen cylinder about pumping up 600 times. How to use: Please perform the pump test according to the instructions and follow the steps to pump. Working pressure: 0-40MPA (0-6000PSi). Connector type: 8MM female. Air Tube Length: Approx. 53cm / 20.9in. Connector Diameter: 3.1cm / 1.2in. Connector Length: 9.9cm / 3.9 in. Package Size: 64x 17.5 x 6 cm/ 25.19 x 6.88 x 2.36inch. 3340g/ 117.81 oz. 1 x High-pressure air pump. 3 Pack x Accessories. Cylindrical filter, sponge filter, hexagonal tool, test plug, car connector. Pump base, first-stage piston O-ring, third-stage piston, piston bead, piston head, gasket, activated carbon filter. The high-pressure air pump is a backup air source. Only as a last resort should you use it. Before use, please perform the inflation test according to the instructions and refer to the relevant steps to inflate. 0.5L oxygen cylinder requires about 600 pumps. After testing, Only two adult men take turns pumping for 15-20 minutes, can the oxygen cylinder be filled up. The pumping efficiency is increased by 20%. 24 pumps = 1MPA, so you can lose weight during pumping. During the pumping process, the high-pressure pump generates heat due to friction, so it is normal for the tube to heat up, but be careful with this condition. If you encounter any trouble. Please give us an opportunity to resolve any problems. We understand the concerns and frustrations you might have and we will try our best to service for you. We care about our valued customers and want to build a long-term business relationship with you, so please help us to make better. Welcome to our store! If you were not satisfied when you have received the item(s), please return it/them. Please contact me before you return it;If you do not receive the itemwe offer a. If you are willing return item back to us, please keep it in original package. We value your feedback so we will endeavor to respond to all inquiries. & Public holiday excluded. We would like to earn your. Your action will help us offer our milk and bread. The item “6000PSI 4 Stage PCP Airgun Rifle High Pressure Hand Pump Oxygen Air Tank Refill” is in sale since Thursday, September 17, 2020. This item is in the category “Sporting Goods\Water Sports\Scuba & Snorkeling\Tanks”. The seller is “hsw-winer” and is located in ShenZhen. This item can be shipped to United States, all countries in continental Asia, Canada, Mexico.
  • Air Tube Length: Approx. 53cm / 20.9in
  • Brand: Unbranded
  • Connector Diameter: 3.1cm / 1.2in
  • Connector Length:: 9.9cm / 3.9in
  • Connector type: 8MM female
  • Country/Region of Manufacture: China
  • Custom Bundle: No
  • Main Function: The pumping efficiency is increased by 20%
  • Material: Stainless Steel
  • Model: High-pressure air pump
  • Modified Item: No
  • MPN: Does Not Apply
  • Package Size: 64×17.5×6 cm/25.19×6.88×2.36inch
  • Package Weight: Approx. 3340g/117.81oz
  • Stage: 4 Stage
  • Working pressure: 0-40MPA (0-6000PSi)

6000PSI 4 Stage PCP Airgun Rifle High Pressure Hand Pump Oxygen Air Tank Refill

6000PSI 4 Stage PCP Airgun Rifle High Pressure Hand Pump Oxygen Air Tank Refill

6000PSI 4 Stage PCP Airgun Rifle High Pressure Hand Pump Oxygen Air Tank Refill
6000PSI 4 Stage PCP Airgun Rifle High Pressure Hand Pump Oxygen Air Tank Refill
6000PSI 4 Stage PCP Airgun Rifle High Pressure Hand Pump Oxygen Air Tank Refill
6000PSI 4 Stage PCP Airgun Rifle High Pressure Hand Pump Oxygen Air Tank Refill
6000PSI 4 Stage PCP Airgun Rifle High Pressure Hand Pump Oxygen Air Tank Refill
6000PSI 4 Stage PCP Airgun Rifle High Pressure Hand Pump Oxygen Air Tank Refill
6000PSI 4 Stage PCP Airgun Rifle High Pressure Hand Pump Oxygen Air Tank Refill
6000PSI 4 Stage PCP Airgun Rifle High Pressure Hand Pump Oxygen Air Tank Refill
6000PSI 4 Stage PCP Airgun Rifle High Pressure Hand Pump Oxygen Air Tank Refill
6000PSI 4 Stage PCP Airgun Rifle High Pressure Hand Pump Oxygen Air Tank Refill
6000PSI 4 Stage PCP Airgun Rifle High Pressure Hand Pump Oxygen Air Tank Refill
6000PSI 4 Stage PCP Airgun Rifle High Pressure Hand Pump Oxygen Air Tank Refill

6000PSI 4 Stage PCP Airgun Rifle High Pressure Hand Pump Oxygen Air Tank Refill
Made of high quality stainless steel, anti-rust and durable for long lasting. High pressure air pump by hand, with oil-water separator, compress dry and clean air into oxygen cylinder. With ergonomic design, easy to pump, convenient to operate, time-saving and labor-saving. With a pressure gauge on it, you can know when to stop inflating. Come with practical accessory for quick and easy use. Tighten the pressure relief screw before pumping up (tighten clockwise); loosen the pressure relief screw after pumping up (tighten counterclockwise). Non-explosive tube: it’s made of imported material, and with its 63MPA pressure resistant design, it is not easy to brittle in the condition of the temperature of -30°. Oil-water separator: make the gas more pure. It takes about 15 to 20 minutes to fill a 0.5L oxygen cylinder about pumping up 600 times. How to use: Please perform the pump test according to the instructions and follow the steps to pump. Working pressure: 0-40MPA (0-6000PSi). Connector type: 8MM female. Air Tube Length: Approx. 53cm / 20.9in. Connector Diameter: 3.1cm / 1.2in. Connector Length: 9.9cm / 3.9 in. Package Size: 64x 17.5 x 6 cm/ 25.19 x 6.88 x 2.36inch. 3340g/ 117.81 oz. 1 x High-pressure air pump. 3 Pack x Accessories. Cylindrical filter, sponge filter, hexagonal tool, test plug, car connector. Pump base, first-stage piston O-ring, third-stage piston, piston bead, piston head, gasket, activated carbon filter. The high-pressure air pump is a backup air source. Only as a last resort should you use it. Before use, please perform the inflation test according to the instructions and refer to the relevant steps to inflate. 0.5L oxygen cylinder requires about 600 pumps. After testing, Only two adult men take turns pumping for 15-20 minutes, can the oxygen cylinder be filled up. The pumping efficiency is increased by 20%. 24 pumps = 1MPA, so you can lose weight during pumping. During the pumping process, the high-pressure pump generates heat due to friction, so it is normal for the tube to heat up, but be careful with this condition. We will respond and solve your issue ASAP. Our goal is to provide excellent before and after sales services to all our customers. (except weekends and holidays). The item “6000PSI 4 Stage PCP Airgun Rifle High Pressure Hand Pump Oxygen Air Tank Refill” is in sale since Friday, September 4, 2020. This item is in the category “Sporting Goods\Water Sports\Scuba & Snorkeling\Tanks”. The seller is “beyond_new” and is located in ShenZhen. This item can be shipped to United States, all countries in continental Asia, Canada, Mexico.
  • Air Tube Length: Approx. 53cm / 20.9in
  • Brand: Unbranded
  • Connector Diameter: 3.1cm / 1.2in
  • Connector Length:: 9.9cm / 3.9in
  • Connector type: 8MM female
  • Country/Region of Manufacture: China
  • Custom Bundle: No
  • Main Function: The pumping efficiency is increased by 20%
  • Material: Stainless Steel
  • Model: High-pressure air pump
  • Modified Item: No
  • MPN: Does Not Apply
  • Package Size: 64×17.5×6 cm/25.19×6.88×2.36inch
  • Package Weight: Approx. 3340g/117.81oz
  • Stage: 4 Stage
  • Working pressure: 0-40MPA (0-6000PSi)

6000PSI 4 Stage PCP Airgun Rifle High Pressure Hand Pump Oxygen Air Tank Refill

4 Stage 6000PSI PCP Air Tank High Pressure Hand Pump Hunting Scuba Diving Oxygen

4 Stage 6000PSI PCP Air Tank High Pressure Hand Pump Hunting Scuba Diving Oxygen
4 Stage 6000PSI PCP Air Tank High Pressure Hand Pump Hunting Scuba Diving Oxygen
4 Stage 6000PSI PCP Air Tank High Pressure Hand Pump Hunting Scuba Diving Oxygen
4 Stage 6000PSI PCP Air Tank High Pressure Hand Pump Hunting Scuba Diving Oxygen
4 Stage 6000PSI PCP Air Tank High Pressure Hand Pump Hunting Scuba Diving Oxygen
4 Stage 6000PSI PCP Air Tank High Pressure Hand Pump Hunting Scuba Diving Oxygen
4 Stage 6000PSI PCP Air Tank High Pressure Hand Pump Hunting Scuba Diving Oxygen
4 Stage 6000PSI PCP Air Tank High Pressure Hand Pump Hunting Scuba Diving Oxygen
4 Stage 6000PSI PCP Air Tank High Pressure Hand Pump Hunting Scuba Diving Oxygen
4 Stage 6000PSI PCP Air Tank High Pressure Hand Pump Hunting Scuba Diving Oxygen
4 Stage 6000PSI PCP Air Tank High Pressure Hand Pump Hunting Scuba Diving Oxygen

4 Stage 6000PSI PCP Air Tank High Pressure Hand Pump Hunting Scuba Diving Oxygen
4 Stage 6000PSI PCP Air Tank High Pressure Hand Pump Hunting Scuba Diving Oxygen. Made of high quality stainless steel, anti-rust and durable for long lasting. High pressure air pump by hand, with oil-water separator, compress dry and clean air into oxygen cylinder. With ergonomic design, easy to pump, convenient to operate, time-saving and labor-saving. With a pressure gauge on it, you can know when to stop inflating. Come with practical accessory for quick and easy use. Tighten the pressure relief screw before pumping up (tighten clockwise); loosen the pressure relief screw after pumping up (tighten counterclockwise). Non-explosive tube: it’s made of imported material, and with its 63MPA pressure resistant design, it is not easy to brittle in the condition of the temperature of -30°. Oil-water separator: make the gas more pure. It takes about 15 to 20 minutes to fill a 0.5L oxygen cylinder about pumping up 600 times. How to use: Please perform the pump test according to the instructions and follow the steps to pump. Working pressure: 0-40MPA (0-6000PSi). Connector type: 8MM female. Air Tube Length: Approx. 53cm / 20.9in. Connector Diameter: 3.1cm / 1.2in. Connector Length: 9.9cm / 3.9 in. Package Size: 64x 17.5 x 6 cm/ 25.19 x 6.88 x 2.36inch. 3340g/ 117.81 oz. 1 x High-pressure air pump. 3 Pack x Accessories. Cylindrical filter, sponge filter, hexagonal tool, test plug, car connector. Pump base, first-stage piston O-ring, third-stage piston, piston bead, piston head, gasket, activated carbon filter. The high-pressure air pump is a backup air source. Only as a last resort should you use it. Before use, please perform the inflation test according to the instructions and refer to the relevant steps to inflate. 0.5L oxygen cylinder requires about 600 pumps. After testing, Only two adult men take turns pumping for 15-20 minutes, can the oxygen cylinder be filled up. The pumping efficiency is increased by 20%. 24 pumps = 1MPA, so you can lose weight during pumping. During the pumping process, the high-pressure pump generates heat due to friction, so it is normal for the tube to heat up, but be careful with this condition. If you encounter any trouble. Please give us an opportunity to resolve any problems. We understand the concerns and frustrations you might have and we will try our best to service for you. We care about our valued customers and want to build a long-term business relationship with you, so please help us to make better. The item “4 Stage 6000PSI PCP Air Tank High Pressure Hand Pump Hunting Scuba Diving Oxygen” is in sale since Wednesday, August 5, 2020. This item is in the category “Sporting Goods\Water Sports\Scuba & Snorkeling\Tanks”. The seller is “jchou_fast” and is located in ShenZhen. This item can be shipped to United States, all countries in continental Asia, Canada, Mexico.
  • Air Tube Length: Approx. 53cm / 20.9in
  • Brand: Unbranded
  • Connector Diameter: 3.1cm / 1.2in
  • Connector Length:: 9.9cm / 3.9in
  • Connector type: 8MM female
  • Country/Region of Manufacture: China
  • Custom Bundle: No
  • Main Function: The pumping efficiency is increased by 20%
  • Material: Stainless Steel
  • Model: High-pressure air pump
  • Modified Item: No
  • MPN: Does Not Apply
  • Package Size: 64×17.5×6 cm/25.19×6.88×2.36inch
  • Package Weight: Approx. 3340g/117.81oz
  • Stage: 4 Stage
  • Working pressure: 0-40MPA (0-6000PSi)

4 Stage 6000PSI PCP Air Tank High Pressure Hand Pump Hunting Scuba Diving Oxygen

Updated Diving High Pressure Hand Air pump Oxygen Tank Inflator+Pressure Gauge

Updated Diving High Pressure Hand Air pump Oxygen Tank Inflator+Pressure Gauge
Updated Diving High Pressure Hand Air pump Oxygen Tank Inflator+Pressure Gauge
Updated Diving High Pressure Hand Air pump Oxygen Tank Inflator+Pressure Gauge
Updated Diving High Pressure Hand Air pump Oxygen Tank Inflator+Pressure Gauge
Updated Diving High Pressure Hand Air pump Oxygen Tank Inflator+Pressure Gauge
Updated Diving High Pressure Hand Air pump Oxygen Tank Inflator+Pressure Gauge
Updated Diving High Pressure Hand Air pump Oxygen Tank Inflator+Pressure Gauge
Updated Diving High Pressure Hand Air pump Oxygen Tank Inflator+Pressure Gauge
Updated Diving High Pressure Hand Air pump Oxygen Tank Inflator+Pressure Gauge
Updated Diving High Pressure Hand Air pump Oxygen Tank Inflator+Pressure Gauge
Updated Diving High Pressure Hand Air pump Oxygen Tank Inflator+Pressure Gauge
Updated Diving High Pressure Hand Air pump Oxygen Tank Inflator+Pressure Gauge

Updated Diving High Pressure Hand Air pump Oxygen Tank Inflator+Pressure Gauge
Updated Diving High Pressure Hand Air pump Oxygen Tank Inflator+Pressure Gauge. Made of high quality stainless steel, anti-rust and durable for long lasting. High pressure air pump by hand, with oil-water separator, compress dry and clean air into oxygen cylinder. With ergonomic design, easy to pump, convenient to operate, time-saving and labor-saving. With a pressure gauge on it, you can know when to stop inflating. Come with practical accessory for quick and easy use. Tighten the pressure relief screw before pumping up (tighten clockwise); loosen the pressure relief screw after pumping up (tighten counterclockwise). Non-explosive tube: it’s made of imported material, and with its 63MPA pressure resistant design, it is not easy to brittle in the condition of the temperature of -30°. Oil-water separator: make the gas more pure. It takes about 15 to 20 minutes to fill a 0.5L oxygen cylinder about pumping up 600 times. How to use: Please perform the pump test according to the instructions and follow the steps to pump. Working pressure: 0-40MPA (0-6000PSi). Connector type: 8MM female. Air Tube Length: Approx. 53cm / 20.9in. Connector Diameter: 3.1cm / 1.2in. Connector Length: 9.9cm / 3.9 in. Package Size: 64x 17.5 x 6 cm/ 25.19 x 6.88 x 2.36inch. 3340g/ 117.81 oz. 1 x High-pressure air pump. 3 Pack x Accessories. Cylindrical filter, sponge filter, hexagonal tool, test plug, car connector. Pump base, first-stage piston O-ring, third-stage piston, piston bead, piston head, gasket, activated carbon filter. The high-pressure air pump is a backup air source. Only as a last resort should you use it. Before use, please perform the inflation test according to the instructions and refer to the relevant steps to inflate. 0.5L oxygen cylinder requires about 600 pumps. After testing, Only two adult men take turns pumping for 15-20 minutes, can the oxygen cylinder be filled up. The pumping efficiency is increased by 20%. 24 pumps = 1MPA, so you can lose weight during pumping. During the pumping process, the high-pressure pump generates heat due to friction, so it is normal for the tube to heat up, but be careful with this condition. The item “Updated Diving High Pressure Hand Air pump Oxygen Tank Inflator+Pressure Gauge” is in sale since Friday, June 5, 2020. This item is in the category “Sporting Goods\Scuba & Snorkelling\Cylinders & Tanks”. The seller is “noble_toc” and is located in ShenZhen. This item can be shipped to all countries in Europe, all countries in continental Asia, Canada.
  • Air Tube Length: Approx. 53cm / 20.9in
  • Brand: Unbranded
  • Connector Diameter: 3.1cm / 1.2in
  • Connector Length:: 9.9cm / 3.9in
  • Connector type: 8MM female
  • Country/Region of Manufacture: China
  • Custom Bundle: No
  • Material: Stainless Steel
  • Modified Item: No
  • MPN: Does Not Apply
  • Package Size: 64×17.5×6 cm/25.19×6.88×2.36inch
  • Package Weight: Approx. 3340g/117.81oz
  • Working pressure: 0-40MPA (0-6000PSi)

Updated Diving High Pressure Hand Air pump Oxygen Tank Inflator+Pressure Gauge

4 Stage 60000PSI Hand Pump High Pressure Gauge Diving Oxygen Air Tank Rifle PCP

4 Stage 60000PSI Hand Pump High Pressure Gauge Diving Oxygen Air Tank Rifle PCP
4 Stage 60000PSI Hand Pump High Pressure Gauge Diving Oxygen Air Tank Rifle PCP
4 Stage 60000PSI Hand Pump High Pressure Gauge Diving Oxygen Air Tank Rifle PCP
4 Stage 60000PSI Hand Pump High Pressure Gauge Diving Oxygen Air Tank Rifle PCP
4 Stage 60000PSI Hand Pump High Pressure Gauge Diving Oxygen Air Tank Rifle PCP
4 Stage 60000PSI Hand Pump High Pressure Gauge Diving Oxygen Air Tank Rifle PCP
4 Stage 60000PSI Hand Pump High Pressure Gauge Diving Oxygen Air Tank Rifle PCP
4 Stage 60000PSI Hand Pump High Pressure Gauge Diving Oxygen Air Tank Rifle PCP
4 Stage 60000PSI Hand Pump High Pressure Gauge Diving Oxygen Air Tank Rifle PCP
4 Stage 60000PSI Hand Pump High Pressure Gauge Diving Oxygen Air Tank Rifle PCP

4 Stage 60000PSI Hand Pump High Pressure Gauge Diving Oxygen Air Tank Rifle PCP
1# High Pressure Hand Air Pump. Made of high quality stainless steel, anti-rust and durable for long lasting. High pressure air pump by hand, with oil-water separator, compress dry and clean air into oxygen cylinder. With ergonomic design, easy to pump, convenient to operate, time-saving and labor-saving. With a pressure gauge on it, you can know when to stop inflating. Come with practical accessory for quick and easy use. Tighten the pressure relief screw before pumping up (tighten clockwise); loosen the pressure relief screw after pumping up (tighten counterclockwise). Non-explosive tube: it’s made of imported material, and with its 63MPA pressure resistant design, it is not easy to brittle in the condition of the temperature of -30°. Oil-water separator: make the gas more pure. It takes about 15 to 20 minutes to fill a 0.5L oxygen cylinder about pumping up 600 times. How to use: Please perform the pump test according to the instructions and follow the steps to pump. Working pressure: 0-40MPA (0-6000PSi). Connector type: 8MM female. Air Tube Length: Approx. 53cm / 20.9in. Connector Diameter: 3.1cm / 1.2in. Connector Length: 9.9cm / 3.9 in. Package Size: 64x 17.5 x 6 cm/ 25.19 x 6.88 x 2.36inch. 3340g/ 117.81 oz. 1 x High-pressure air pump. 3 Pack x Accessories. Cylindrical filter, sponge filter, hexagonal tool, test plug, car connector. Pump base, first-stage piston O-ring, third-stage piston, piston bead, piston head, gasket, activated carbon filter. The high-pressure air pump is a backup air source. Only as a last resort should you use it. Before use, please perform the inflation test according to the instructions and refer to the relevant steps to inflate. 0.5L oxygen cylinder requires about 600 pumps. After testing, Only two adult men take turns pumping for 15-20 minutes, can the oxygen cylinder be filled up. The pumping efficiency is increased by 20%. 24 pumps = 1MPA, so you can lose weight during pumping. During the pumping process, the high-pressure pump generates heat due to friction, so it is normal for the tube to heat up, but be careful with this condition. 2# Only Scuba Adaptor with Hose. High pressure hose with stainless steel spring protector. Higher pressure resistance This fill station Knob type exhaust valve, exhaust is very smooth The DIN fitting(G5/8) will fit diving cylinders. The hose terminates with 8mm stainless quick coupler socket 8mm Ball Type LockDurable And Easy to aperate. Specifications: Material: aluminium alloy+ stainless steel Hose Length: 50cm / 19.7inch W. P: 160MPa/1600Bar/23206PSI Thread: DIN(G5/8) Hose quick coupler Thread: 8mm Weight: 290g Packing size: 18124cm. Package Includes: 1 x Scuba Adaptor with Hose. If you encounter any trouble. Please give us an opportunity to resolve any problems. We understand the concerns and frustrations you might have and we will try our best to service for you. We care about our valued customers and want to build a long-term business relationship with you, so please help us to make better. Welcome to our store! If you were not satisfied when you have received the item(s), please return it/them. Please contact me before you return it;If you do not receive the itemwe offer a. If you are willing return item back to us, please keep it in original package. We value your feedback so we will endeavor to respond to all inquiries. & Public holiday excluded. We would like to earn your. Your action will help us offer our milk and bread. The item “4 Stage 60000PSI Hand Pump High Pressure Gauge Diving Oxygen Air Tank Rifle PCP” is in sale since Thursday, July 2, 2020. This item is in the category “Sporting Goods\Water Sports\Scuba & Snorkeling\Tanks”. The seller is “fcc-ant” and is located in ShenZhen. This item can be shipped to United States, all countries in continental Asia, Canada, Mexico.
  • Air Tube Length: Approx. 53cm / 20.9in
  • Brand: Unbranded
  • Come with practical accessory: For quick and easy use
  • Connector Diameter: 3.1cm / 1.2in
  • Connector Length:: 9.9cm / 3.9in
  • Connector type: 8MM female
  • Country/Region of Manufacture: China
  • Custom Bundle: No
  • DURABLE WITH SMOOTH MOTION: sleek stainless steel
  • HIGH PRESSURE WITH SAFETY: high pressure goes up to 60000psi
  • Main Function: The pumping efficiency is increased by 20%
  • Material: Stainless Steel
  • Model: High-pressure air pump
  • Modified Item: No
  • MPN: Does Not Apply
  • OIL-WATER SEPARATOR: make the gas more pure
  • Package Size: 64×17.5×6 cm/25.19×6.88×2.36inch
  • Package Weight: Approx. 3340g/117.81oz
  • Stage: 4 Stage
  • With a pressure gauge on it: You can know when to stop inflating.
  • With ergonomic design: Easy to pump, convenient to operate, time-saving and labor-saving
  • Working pressure: 0-40MPA (0-6000PSi)

4 Stage 60000PSI Hand Pump High Pressure Gauge Diving Oxygen Air Tank Rifle PCP