Diving Oxygen Cylinder Air Pump High Pressure Scuba Air Tank Inflator Dive Tool

Diving Oxygen Cylinder Air Pump High Pressure Scuba Air Tank Inflator Dive Tool
Diving Oxygen Cylinder Air Pump High Pressure Scuba Air Tank Inflator Dive Tool
Diving Oxygen Cylinder Air Pump High Pressure Scuba Air Tank Inflator Dive Tool
Diving Oxygen Cylinder Air Pump High Pressure Scuba Air Tank Inflator Dive Tool
Diving Oxygen Cylinder Air Pump High Pressure Scuba Air Tank Inflator Dive Tool
Diving Oxygen Cylinder Air Pump High Pressure Scuba Air Tank Inflator Dive Tool
Diving Oxygen Cylinder Air Pump High Pressure Scuba Air Tank Inflator Dive Tool
Diving Oxygen Cylinder Air Pump High Pressure Scuba Air Tank Inflator Dive Tool
Diving Oxygen Cylinder Air Pump High Pressure Scuba Air Tank Inflator Dive Tool
Diving Oxygen Cylinder Air Pump High Pressure Scuba Air Tank Inflator Dive Tool
Diving Oxygen Cylinder Air Pump High Pressure Scuba Air Tank Inflator Dive Tool
Diving Oxygen Cylinder Air Pump High Pressure Scuba Air Tank Inflator Dive Tool

Diving Oxygen Cylinder Air Pump High Pressure Scuba Air Tank Inflator Dive Tool
Diving Oxygen Cylinder Air Pump High Pressure Scuba Air Tank Inflator Dive Tool. Made of high quality stainless steel, anti-rust and durable for long lasting. High pressure air pump by hand, with oil-water separator, compress dry and clean air into oxygen cylinder. With ergonomic design, easy to pump, convenient to operate, time-saving and labor-saving. With a pressure gauge on it, you can know when to stop inflating. Come with practical accessory for quick and easy use. Tighten the pressure relief screw before pumping up (tighten clockwise); loosen the pressure relief screw after pumping up (tighten counterclockwise). Non-explosive tube: it’s made of imported material, and with its 63MPA pressure resistant design, it is not easy to brittle in the condition of the temperature of -30°. Oil-water separator: make the gas more pure. It takes about 15 to 20 minutes to fill a 0.5L oxygen cylinder about pumping up 600 times. How to use: Please perform the pump test according to the instructions and follow the steps to pump. Working pressure: 0-40MPA (0-6000PSi). Connector type: 8MM female. Air Tube Length: Approx. 53cm / 20.9in. Connector Diameter: 3.1cm / 1.2in. Connector Length: 9.9cm / 3.9 in. Package Size: 64x 17.5 x 6 cm/ 25.19 x 6.88 x 2.36inch. 3340g/ 117.81 oz. 1 x High-pressure air pump. 3 Pack x Accessories. Cylindrical filter, sponge filter, hexagonal tool, test plug, car connector. Pump base, first-stage piston O-ring, third-stage piston, piston bead, piston head, gasket, activated carbon filter. The high-pressure air pump is a backup air source. Only as a last resort should you use it. Before use, please perform the inflation test according to the instructions and refer to the relevant steps to inflate. 0.5L oxygen cylinder requires about 600 pumps. After testing, Only two adult men take turns pumping for 15-20 minutes, can the oxygen cylinder be filled up. The pumping efficiency is increased by 20%. 24 pumps = 1MPA, so you can lose weight during pumping. During the pumping process, the high-pressure pump generates heat due to friction, so it is normal for the tube to heat up, but be careful with this condition. (except weekends and holidays). The item “Diving Oxygen Cylinder Air Pump High Pressure Scuba Air Tank Inflator Dive Tool” is in sale since Tuesday, September 8, 2020. This item is in the category “Sporting Goods\Water Sports\Scuba & Snorkeling\Tanks”. The seller is “yi-hsbt” and is located in ShenZhen. This item can be shipped to United States, all countries in continental Asia, Canada, Mexico.
  • Air Tube Length: Approx. 53cm / 20.9in
  • Brand: Unbranded
  • Connector Diameter: 3.1cm / 1.2in
  • Connector Length:: 9.9cm / 3.9in
  • Connector type: 8MM female
  • Main Function: The pumping efficiency is increased by 20%
  • Material: Stainless Steel
  • Model: High-pressure air pump
  • Modified Item: No
  • MPN: Does Not Apply
  • Package Size: 64×17.5×6 cm/25.19×6.88×2.36inch
  • Package Weight: Approx. 3340g/117.81oz
  • Stage: 4 Stage
  • Working pressure: 0-40MPA (0-6000PSi)

Diving Oxygen Cylinder Air Pump High Pressure Scuba Air Tank Inflator Dive Tool

6000PSI 4 Stage PCP Airgun Rifle High Pressure Hand Pump Oxygen Air Tank Refill

6000PSI 4 Stage PCP Airgun Rifle High Pressure Hand Pump Oxygen Air Tank Refill
6000PSI 4 Stage PCP Airgun Rifle High Pressure Hand Pump Oxygen Air Tank Refill
6000PSI 4 Stage PCP Airgun Rifle High Pressure Hand Pump Oxygen Air Tank Refill
6000PSI 4 Stage PCP Airgun Rifle High Pressure Hand Pump Oxygen Air Tank Refill
6000PSI 4 Stage PCP Airgun Rifle High Pressure Hand Pump Oxygen Air Tank Refill
6000PSI 4 Stage PCP Airgun Rifle High Pressure Hand Pump Oxygen Air Tank Refill
6000PSI 4 Stage PCP Airgun Rifle High Pressure Hand Pump Oxygen Air Tank Refill
6000PSI 4 Stage PCP Airgun Rifle High Pressure Hand Pump Oxygen Air Tank Refill
6000PSI 4 Stage PCP Airgun Rifle High Pressure Hand Pump Oxygen Air Tank Refill
6000PSI 4 Stage PCP Airgun Rifle High Pressure Hand Pump Oxygen Air Tank Refill
6000PSI 4 Stage PCP Airgun Rifle High Pressure Hand Pump Oxygen Air Tank Refill

6000PSI 4 Stage PCP Airgun Rifle High Pressure Hand Pump Oxygen Air Tank Refill
6000PSI 4 Stage PCP Airgun Rifle High Pressure Hand Pump Oxygen Air Tank Refill. Made of high quality stainless steel, anti-rust and durable for long lasting. High pressure air pump by hand, with oil-water separator, compress dry and clean air into oxygen cylinder. With ergonomic design, easy to pump, convenient to operate, time-saving and labor-saving. With a pressure gauge on it, you can know when to stop inflating. Come with practical accessory for quick and easy use. Tighten the pressure relief screw before pumping up (tighten clockwise); loosen the pressure relief screw after pumping up (tighten counterclockwise). Non-explosive tube: it’s made of imported material, and with its 63MPA pressure resistant design, it is not easy to brittle in the condition of the temperature of -30°. Oil-water separator: make the gas more pure. It takes about 15 to 20 minutes to fill a 0.5L oxygen cylinder about pumping up 600 times. How to use: Please perform the pump test according to the instructions and follow the steps to pump. Working pressure: 0-40MPA (0-6000PSi). Connector type: 8MM female. Air Tube Length: Approx. 53cm / 20.9in. Connector Diameter: 3.1cm / 1.2in. Connector Length: 9.9cm / 3.9 in. Package Size: 64x 17.5 x 6 cm/ 25.19 x 6.88 x 2.36inch. 3340g/ 117.81 oz. 1 x High-pressure air pump. 3 Pack x Accessories. Cylindrical filter, sponge filter, hexagonal tool, test plug, car connector. Pump base, first-stage piston O-ring, third-stage piston, piston bead, piston head, gasket, activated carbon filter. The high-pressure air pump is a backup air source. Only as a last resort should you use it. Before use, please perform the inflation test according to the instructions and refer to the relevant steps to inflate. 0.5L oxygen cylinder requires about 600 pumps. After testing, Only two adult men take turns pumping for 15-20 minutes, can the oxygen cylinder be filled up. The pumping efficiency is increased by 20%. 24 pumps = 1MPA, so you can lose weight during pumping. During the pumping process, the high-pressure pump generates heat due to friction, so it is normal for the tube to heat up, but be careful with this condition. If you encounter any trouble. Please give us an opportunity to resolve any problems. We understand the concerns and frustrations you might have and we will try our best to service for you. We care about our valued customers and want to build a long-term business relationship with you, so please help us to make better. Welcome to our store! If you were not satisfied when you have received the item(s), please return it/them. Please contact me before you return it;If you do not receive the itemwe offer a. If you are willing return item back to us, please keep it in original package. We value your feedback so we will endeavor to respond to all inquiries. & Public holiday excluded. We would like to earn your. Your action will help us offer our milk and bread. The item “6000PSI 4 Stage PCP Airgun Rifle High Pressure Hand Pump Oxygen Air Tank Refill” is in sale since Thursday, September 17, 2020. This item is in the category “Sporting Goods\Water Sports\Scuba & Snorkeling\Tanks”. The seller is “hsw-winer” and is located in ShenZhen. This item can be shipped to United States, all countries in continental Asia, Canada, Mexico.
  • Air Tube Length: Approx. 53cm / 20.9in
  • Brand: Unbranded
  • Connector Diameter: 3.1cm / 1.2in
  • Connector Length:: 9.9cm / 3.9in
  • Connector type: 8MM female
  • Country/Region of Manufacture: China
  • Custom Bundle: No
  • Main Function: The pumping efficiency is increased by 20%
  • Material: Stainless Steel
  • Model: High-pressure air pump
  • Modified Item: No
  • MPN: Does Not Apply
  • Package Size: 64×17.5×6 cm/25.19×6.88×2.36inch
  • Package Weight: Approx. 3340g/117.81oz
  • Stage: 4 Stage
  • Working pressure: 0-40MPA (0-6000PSi)

6000PSI 4 Stage PCP Airgun Rifle High Pressure Hand Pump Oxygen Air Tank Refill

6000PSI 4 Stage PCP Airgun Rifle High Pressure Hand Pump Oxygen Air Tank Refill

6000PSI 4 Stage PCP Airgun Rifle High Pressure Hand Pump Oxygen Air Tank Refill
6000PSI 4 Stage PCP Airgun Rifle High Pressure Hand Pump Oxygen Air Tank Refill
6000PSI 4 Stage PCP Airgun Rifle High Pressure Hand Pump Oxygen Air Tank Refill
6000PSI 4 Stage PCP Airgun Rifle High Pressure Hand Pump Oxygen Air Tank Refill
6000PSI 4 Stage PCP Airgun Rifle High Pressure Hand Pump Oxygen Air Tank Refill
6000PSI 4 Stage PCP Airgun Rifle High Pressure Hand Pump Oxygen Air Tank Refill
6000PSI 4 Stage PCP Airgun Rifle High Pressure Hand Pump Oxygen Air Tank Refill
6000PSI 4 Stage PCP Airgun Rifle High Pressure Hand Pump Oxygen Air Tank Refill
6000PSI 4 Stage PCP Airgun Rifle High Pressure Hand Pump Oxygen Air Tank Refill
6000PSI 4 Stage PCP Airgun Rifle High Pressure Hand Pump Oxygen Air Tank Refill
6000PSI 4 Stage PCP Airgun Rifle High Pressure Hand Pump Oxygen Air Tank Refill
6000PSI 4 Stage PCP Airgun Rifle High Pressure Hand Pump Oxygen Air Tank Refill

6000PSI 4 Stage PCP Airgun Rifle High Pressure Hand Pump Oxygen Air Tank Refill
Made of high quality stainless steel, anti-rust and durable for long lasting. High pressure air pump by hand, with oil-water separator, compress dry and clean air into oxygen cylinder. With ergonomic design, easy to pump, convenient to operate, time-saving and labor-saving. With a pressure gauge on it, you can know when to stop inflating. Come with practical accessory for quick and easy use. Tighten the pressure relief screw before pumping up (tighten clockwise); loosen the pressure relief screw after pumping up (tighten counterclockwise). Non-explosive tube: it’s made of imported material, and with its 63MPA pressure resistant design, it is not easy to brittle in the condition of the temperature of -30°. Oil-water separator: make the gas more pure. It takes about 15 to 20 minutes to fill a 0.5L oxygen cylinder about pumping up 600 times. How to use: Please perform the pump test according to the instructions and follow the steps to pump. Working pressure: 0-40MPA (0-6000PSi). Connector type: 8MM female. Air Tube Length: Approx. 53cm / 20.9in. Connector Diameter: 3.1cm / 1.2in. Connector Length: 9.9cm / 3.9 in. Package Size: 64x 17.5 x 6 cm/ 25.19 x 6.88 x 2.36inch. 3340g/ 117.81 oz. 1 x High-pressure air pump. 3 Pack x Accessories. Cylindrical filter, sponge filter, hexagonal tool, test plug, car connector. Pump base, first-stage piston O-ring, third-stage piston, piston bead, piston head, gasket, activated carbon filter. The high-pressure air pump is a backup air source. Only as a last resort should you use it. Before use, please perform the inflation test according to the instructions and refer to the relevant steps to inflate. 0.5L oxygen cylinder requires about 600 pumps. After testing, Only two adult men take turns pumping for 15-20 minutes, can the oxygen cylinder be filled up. The pumping efficiency is increased by 20%. 24 pumps = 1MPA, so you can lose weight during pumping. During the pumping process, the high-pressure pump generates heat due to friction, so it is normal for the tube to heat up, but be careful with this condition. We will respond and solve your issue ASAP. Our goal is to provide excellent before and after sales services to all our customers. (except weekends and holidays). The item “6000PSI 4 Stage PCP Airgun Rifle High Pressure Hand Pump Oxygen Air Tank Refill” is in sale since Friday, September 4, 2020. This item is in the category “Sporting Goods\Water Sports\Scuba & Snorkeling\Tanks”. The seller is “beyond_new” and is located in ShenZhen. This item can be shipped to United States, all countries in continental Asia, Canada, Mexico.
  • Air Tube Length: Approx. 53cm / 20.9in
  • Brand: Unbranded
  • Connector Diameter: 3.1cm / 1.2in
  • Connector Length:: 9.9cm / 3.9in
  • Connector type: 8MM female
  • Country/Region of Manufacture: China
  • Custom Bundle: No
  • Main Function: The pumping efficiency is increased by 20%
  • Material: Stainless Steel
  • Model: High-pressure air pump
  • Modified Item: No
  • MPN: Does Not Apply
  • Package Size: 64×17.5×6 cm/25.19×6.88×2.36inch
  • Package Weight: Approx. 3340g/117.81oz
  • Stage: 4 Stage
  • Working pressure: 0-40MPA (0-6000PSi)

6000PSI 4 Stage PCP Airgun Rifle High Pressure Hand Pump Oxygen Air Tank Refill

6000PSI 4 Stage High Pressure PCP Hand Pump Gauge Air Tank Rifle Filling Stirrup

6000PSI 4 Stage High Pressure PCP Hand Pump Gauge Air Tank Rifle Filling Stirrup
6000PSI 4 Stage High Pressure PCP Hand Pump Gauge Air Tank Rifle Filling Stirrup
6000PSI 4 Stage High Pressure PCP Hand Pump Gauge Air Tank Rifle Filling Stirrup
6000PSI 4 Stage High Pressure PCP Hand Pump Gauge Air Tank Rifle Filling Stirrup
6000PSI 4 Stage High Pressure PCP Hand Pump Gauge Air Tank Rifle Filling Stirrup
6000PSI 4 Stage High Pressure PCP Hand Pump Gauge Air Tank Rifle Filling Stirrup
6000PSI 4 Stage High Pressure PCP Hand Pump Gauge Air Tank Rifle Filling Stirrup
6000PSI 4 Stage High Pressure PCP Hand Pump Gauge Air Tank Rifle Filling Stirrup
6000PSI 4 Stage High Pressure PCP Hand Pump Gauge Air Tank Rifle Filling Stirrup
6000PSI 4 Stage High Pressure PCP Hand Pump Gauge Air Tank Rifle Filling Stirrup
6000PSI 4 Stage High Pressure PCP Hand Pump Gauge Air Tank Rifle Filling Stirrup
6000PSI 4 Stage High Pressure PCP Hand Pump Gauge Air Tank Rifle Filling Stirrup

6000PSI 4 Stage High Pressure PCP Hand Pump Gauge Air Tank Rifle Filling Stirrup
100% New & Excellent Quality. High Pressure Hand Pump. 1 x High-pressure air pump. 3 Pack x Accessories. Cylindrical filter, sponge filter, hexagonal tool, test plug, car connector. Pump base, first-stage piston O-ring, third-stage piston, piston bead, piston head, gasket, activated carbon filter. Made of high quality stainless steel, anti-rust and durable for long lasting. High pressure air pump by hand, with oil-water separator, compress dry and clean air into oxygen cylinder. With ergonomic design, easy to pump, convenient to operate, time-saving and labor-saving. With a pressure gauge on it, you can know when to stop inflating. Come with practical accessory for quick and easy use. Tighten the pressure relief screw before pumping up (tighten clockwise); loosen the pressure relief screw after pumping up (tighten counterclockwise). Non-explosive tube: it’s made of imported material, and with its 63MPA pressure resistant design, it is not easy to brittle in the condition of the temperature of -30°. Oil-water separator: make the gas more pure. It takes about 15 to 20 minutes to fill a 0.5L oxygen cylinder about pumping up 600 times. How to use: Please perform the pump test according to the instructions and follow the steps to pump. Working pressure: 0-40MPA (0-6000PSi). Connector type: 8MM female. Air Tube Length: Approx. 53cm / 20.9in. Connector Diameter: 3.1cm / 1.2in. Connector Length: 9.9cm / 3.9 in. Package Size: 64x 17.5 x 6 cm/ 25.19 x 6.88 x 2.36inch. 3340g/ 117.81 oz. The high-pressure air pump is a backup air source. Only as a last resort should you use it. Before use, please perform the inflation test according to the instructions and refer to the relevant steps to inflate. 0.5L oxygen cylinder requires about 600 pumps. After testing, Only two adult men take turns pumping for 15-20 minutes, can the oxygen cylinder be filled up. The pumping efficiency is increased by 20%. 24 pumps = 1MPA, so you can lose weight during pumping. During the pumping process, the high-pressure pump generates heat due to friction, so it is normal for the tube to heat up, but be careful with this condition. Top grade material. Made of high-quality aluminum alloy, features high hardness and long-lasting performance. More precise connector thread, 8mm quick-connect female connector, fast install the oil-water separator in seconds. Built-in black rubber o-ring, make sure the tightness when pumping. (Please replace the broken o-ring). Double filter of the activated carbon filter. Oil absorption, water absorption, impurities adsorption. Purer & more reliable. The surface finished with non-slip texture, features comfortable touch. Material: 7075 Aviation aluminum. Weight: about 998g/2.2 pounds. Application: PCP air compressor, scuba diving tank compressor, electric air pump, etc. Sleeve size (L x D): approx. 27 x 5.1cm/10.63 x 2.01 inch. Filter cartridge size (L x D): approx. 18 x 2.8cm/7.09 x 1.10 inch. Female connector diameter: 8mm. If you encounter any trouble. Please give us an opportunity to resolve any problems. We understand the concerns and frustrations you might have and we will try our best to service for you. We care about our valued customers and want to build a long-term business relationship with you, so please help us to make better. If you were not satisfied when you have received the item(s), please return it/them. Please contact me before you return it;If you do not receive the itemwe offer a. If you are willing return item back to us, please keep it in original package. We value your feedback so we will endeavor to respond to all inquiries. & Public holiday excluded. We would like to earn your. Your action will help us offer our milk and bread. The item “6000PSI 4 Stage High Pressure PCP Hand Pump Gauge Air Tank Rifle Filling Stirrup” is in sale since Wednesday, August 26, 2020. This item is in the category “Sporting Goods\Outdoor Sports\Air Guns & Slingshots\Accessories”. The seller is “sunlight_vp” and is located in ShenZhen. This item can be shipped to United States, all countries in continental Asia, Canada, Mexico.
  • Air Tube Length: Approx. 53cm / 20.9in
  • Brand: Unbranded
  • Connector Diameter: 3.1cm / 1.2in
  • Connector Length: 9.9cm / 3.9in
  • Connector type: 8MM female
  • Country/Region of Manufacture: China
  • Custom Bundle: No
  • Main Function: The pumping efficiency is increased by 20%
  • Material: Stainless Steel
  • Model: High-pressure air pump
  • Modified Item: No
  • MPN: Does Not Apply
  • Package Size: 64×17.5×6 cm/25.19×6.88×2.36inch

6000PSI 4 Stage High Pressure PCP Hand Pump Gauge Air Tank Rifle Filling Stirrup

4 Gallon 3mm Nozzle High Pressure Pot Tank Air Paint Spray Gun Painting 2 Hose

4 Gallon 3mm Nozzle High Pressure Pot Tank Air Paint Spray Gun Painting 2 Hose
4 Gallon 3mm Nozzle High Pressure Pot Tank Air Paint Spray Gun Painting 2 Hose
4 Gallon 3mm Nozzle High Pressure Pot Tank Air Paint Spray Gun Painting 2 Hose
4 Gallon 3mm Nozzle High Pressure Pot Tank Air Paint Spray Gun Painting 2 Hose
4 Gallon 3mm Nozzle High Pressure Pot Tank Air Paint Spray Gun Painting 2 Hose
4 Gallon 3mm Nozzle High Pressure Pot Tank Air Paint Spray Gun Painting 2 Hose
4 Gallon 3mm Nozzle High Pressure Pot Tank Air Paint Spray Gun Painting 2 Hose
4 Gallon 3mm Nozzle High Pressure Pot Tank Air Paint Spray Gun Painting 2 Hose
4 Gallon 3mm Nozzle High Pressure Pot Tank Air Paint Spray Gun Painting 2 Hose
4 Gallon 3mm Nozzle High Pressure Pot Tank Air Paint Spray Gun Painting 2 Hose
4 Gallon 3mm Nozzle High Pressure Pot Tank Air Paint Spray Gun Painting 2 Hose
4 Gallon 3mm Nozzle High Pressure Pot Tank Air Paint Spray Gun Painting 2 Hose

4 Gallon 3mm Nozzle High Pressure Pot Tank Air Paint Spray Gun Painting 2 Hose
This paint pressure pot is made of high-quality metal material, has the anti-rust function, and is very durable. All delicate components can be used for a long time. Pressure pots for painting have a 15 liters (4 gallons) volume pressure tank, suitable for large capacity paint and industrial applications. Pressure gauge and fluid pressure regulator ensure accurate setting, safety and stability, and long service life. Nozzle of this paint pressure pot is a simple operation, uniform atomization, improved work efficiency, suitable for spraying various solvents and water-based coatings. Painting pressure pot is widely used in automotive, oil-based, latex, varnish, paint, primer, wood coating, adhesive, and other coatings. Note: Check whether there is still pressure in the tank every time before opening the lid. If so, release with an air pressure relief valve. Pressure pots for painting adopt thickened watering can design, made of high-quality metal material, corrosion resistance, acid, and alkali resistance. Fast And Firm Lock. Paint pot features quick-lock seal system, effective closure, prevent waste of extra paint, energy-saving and environmental protection. This 15-gallon pressure pot features a precision barometer, Air pressure adjustment knob, and safety-valve, ensures safe operation. If the flow regulating valve is loose, the oil output will be more and more, and if the flow regulating valve is tight, the paint volume will be thinner and thinner. If necessary, the flow regulating valve can be adjusted to achieve the ideal atomization effect. Nozzle adopts ergonomic design, flexible operation, trigger switch, porous nozzle, more accurate and efficient operation. The paint pressure pot is suitable for use in commercial paints or where a large amount of spray is required, such as commercial trucks, vans, buses, or construction and industrial finishing. 15 L/4 Gallons Paint Tank Pressure Paint Pot. Commercial gallon paint pressure tank equips with a W-77 air paint sprayer gun and a 3.0 mm nozzle. Excellent for commercial painting or situations where a large amount of spraying is required. Tank Capacity: 15 L / 4 gallon. Air Inlet: 1/4 (6.35 mm). Dope Outlet: 3/8 (9.5 mm). Hose Length: 3 m (10′). Gross Weight: 26.5 lb (12 kg). Product Size (L x H): 9.8″ x 23.6″ (25 x 60 cm). Package Dimensions (L x W x H): 11.4″ x 11.4″ x 18.1 (29 x 29 x 46 cm). 1 x 15 L/4 Gallon 3.0 mm Nozzle Spray Paint Pressure Pot Tank Kit. We believe that it is our vision and mission to provide innovative products with best service and competitive price to satisfy you. Our goal is to make sure that you can find exactly what you are looking for and make it easy for you to place your orders. California Warehouse: City of Industry, CA. If you need to return, please check twice to confirm the item not work and contact our customer service representative, let us know the detailed problem and send us some pictures for confirmation. Please make sure that item has NO man-made sabotage. Used items will not be accepted for return. All emails will be responded to within. Special circumstances will be listed clearly in the listing. Please do check everything carefully after you received the parcel, any the damage except DOA (Dead-On-Arrival) would not be covered if it’s your fault. Caifornia Warehouse: 18501 Arenth Ave, City of Industry, CA 91748. 300 W Airtex Blvd, Suite 200, Houston, TX 77090. 2125 Gateway Blvd, Hebron, KY 41048. 1000 High Street, Perth Amboy, NJ 08861. The item “4 Gallon 3mm Nozzle High Pressure Pot Tank Air Paint Spray Gun Painting 2 Hose” is in sale since Monday, July 6, 2020. This item is in the category “Home & Garden\Home Improvement\Building & Hardware\Paint Sprayers & Accessories\Paint Sprayers”. The seller is “fjczg17″ and is located in Rowland Heights, California. This item can be shipped to United States, Canada, Mexico.
  • Brand: VEVOR
  • MPN: CXUNB0081381531362649
  • Model: 15L 3.0mm
  • Tank Capacity: 15L / 4 gallon
  • Air Inlet: 1/4″ (6.35 mm)
  • Dope Outlet: 3/8″ (9.5 mm)
  • Hose Length: 3m (10″)
  • Gross Weight: 26.5 lb (12 kg)
  • Package Dimensions: 11.4″x11.4″x18.1″

4 Gallon 3mm Nozzle High Pressure Pot Tank Air Paint Spray Gun Painting 2 Hose

4 Stage 4500PSI PCP Air Tank Rifle Filling Stirrup Hand Pump High Pressure Gauge

4 Stage 4500PSI PCP Air Tank Rifle Filling Stirrup Hand Pump High Pressure Gauge
4 Stage 4500PSI PCP Air Tank Rifle Filling Stirrup Hand Pump High Pressure Gauge
4 Stage 4500PSI PCP Air Tank Rifle Filling Stirrup Hand Pump High Pressure Gauge
4 Stage 4500PSI PCP Air Tank Rifle Filling Stirrup Hand Pump High Pressure Gauge
4 Stage 4500PSI PCP Air Tank Rifle Filling Stirrup Hand Pump High Pressure Gauge
4 Stage 4500PSI PCP Air Tank Rifle Filling Stirrup Hand Pump High Pressure Gauge
4 Stage 4500PSI PCP Air Tank Rifle Filling Stirrup Hand Pump High Pressure Gauge
4 Stage 4500PSI PCP Air Tank Rifle Filling Stirrup Hand Pump High Pressure Gauge

4 Stage 4500PSI PCP Air Tank Rifle Filling Stirrup Hand Pump High Pressure Gauge
You may also like. 4 Stage 4500PSI PCP Air Tank Rifle Filling Stirrup Hand Pump High Pressure Gauge. 4500PSI High Pressure Pcp Hand Operated Air pump Inflator Hunting Four-Stage. Stainless steel, magnesium aluminum alloy. Four-stage compressed air pump. Length of oil-water separator. Easier pumping up and purer air intake. [Small size and large volume]. Stainless steel high-pressure pump. 30MPA 4500psi 40MPA 6000psi. Our-stage manual (about 18% faster than the third-stage). The primary tube is made of stainless steel, and the secondary tube is made of magnesium-aluminum alloy. The surface is specially treated with oil storage pores to create a seamless barrel. The anti-slip handle is designed according to ergonomics, and its thick anti-slip grip makes the grip more comfortable. This product is equipped with a luminous pressure gauge, which can display accurately, even if it is used in a dark place. This product is equipped with a foldable pedal base for easy storage and. He pedal base is covered with non-slip plastic, which is more comfortable to use. This product is equipped with an oil-water separator, which separates oil and water to make the gas cleaner and. [Explosion-proof pressure relief protection]. This product is equipped with a pressure relief screw. Tighten the pressure relief screw before pumping up (clockwise); after the pump is completed, loosen the pressure relief screw for pressure relief (counterclockwise). Which has the effect of. Xplosion-proof protection and pressure relief protection. Widely used in PCP pistols, rifles and air guns; automobile tires; motorcycle tires; bicycle tires; inflatable kayaks; inflatable balls, etc. All Products from the factory will be provided for. Feedback is very important to us. It is impossible to address issues if we do not know about them! Faction is our ultimate goal. We work hard to earn your trust and future business. A If you receive a defective item, you may return it or ask for a discount. Like LCD screen, industrial burner accessories, printer accessories, instrument accessories, and other fields solutions, we supply Sumsung, LG, AUO, Xinje, Riello, Honeywell, Dungs, Mitsubishi, Siemens, Heidelberg machine parts and The international famous brand accessories etc. Due to time zones, our reply to your questions may not be immediately. But within above working time, we w. If it’s non-workdays, please kindly be patient and wait till Monday. Product weight:2.9kg Material:Stainless steel, magnesium aluminum alloy Compression level:Four-stage compressed air pump Pressure range:0-40MPA Work pressure:0-30MPA(4500PSI) Tube length:500MM Total height:640MM Trachea length:480MM Pressure gauge diameter:45MM Length of oil-water separator:7MM Trachea width:260MM Quick Connector:8MM Tire joint:American Type Color:Black Package size:67CM28CM6CM Function 1: For car tire inflation Function 2: For bicycle inflation Function 3: balloons inflation Function 4: swimming ring inflation Function 5: basketball inflation Function 6: inflatable rubber boats inflation. The item “4 Stage 4500PSI PCP Air Tank Rifle Filling Stirrup Hand Pump High Pressure Gauge” is in sale since Wednesday, August 19, 2020. This item is in the category “Sporting Goods\Outdoor Sports\Air Guns & Slingshots\Accessories”. The seller is “industry.factory” and is located in Shenzhen. This item can be shipped to North, South, or Latin America, all countries in Europe, all countries in continental Asia, Australia.
  • Brand: ToAuto
  • SKU: SG-QSBXJQGL-4
  • Product weight: 2.9kg
  • Material: Stainless steel, magnesium aluminum alloy
  • Compression level: Four-stage compressed air pump
  • Pressure range: 0-40MPA
  • Work pressure: 0-30MPA(4500PSI)
  • Tube length: 500MM
  • Total height: 640MM
  • Trachea length: 480MM
  • Pressure gauge diameter: 45MM
  • Length of oil-water separator: 7MM
  • Trachea width: 260MM
  • Quick Connector: 8MM
  • Tire joint: American Type
  • Color: Black
  • Package size: 67CM*28CM*6CM
  • MPN: Does not apply

4 Stage 4500PSI PCP Air Tank Rifle Filling Stirrup Hand Pump High Pressure Gauge

4 Stage 6000PSI PCP Air Tank High Pressure Hand Pump Hunting Scuba Diving Oxygen

4 Stage 6000PSI PCP Air Tank High Pressure Hand Pump Hunting Scuba Diving Oxygen
4 Stage 6000PSI PCP Air Tank High Pressure Hand Pump Hunting Scuba Diving Oxygen
4 Stage 6000PSI PCP Air Tank High Pressure Hand Pump Hunting Scuba Diving Oxygen
4 Stage 6000PSI PCP Air Tank High Pressure Hand Pump Hunting Scuba Diving Oxygen
4 Stage 6000PSI PCP Air Tank High Pressure Hand Pump Hunting Scuba Diving Oxygen
4 Stage 6000PSI PCP Air Tank High Pressure Hand Pump Hunting Scuba Diving Oxygen
4 Stage 6000PSI PCP Air Tank High Pressure Hand Pump Hunting Scuba Diving Oxygen
4 Stage 6000PSI PCP Air Tank High Pressure Hand Pump Hunting Scuba Diving Oxygen
4 Stage 6000PSI PCP Air Tank High Pressure Hand Pump Hunting Scuba Diving Oxygen
4 Stage 6000PSI PCP Air Tank High Pressure Hand Pump Hunting Scuba Diving Oxygen
4 Stage 6000PSI PCP Air Tank High Pressure Hand Pump Hunting Scuba Diving Oxygen

4 Stage 6000PSI PCP Air Tank High Pressure Hand Pump Hunting Scuba Diving Oxygen
4 Stage 6000PSI PCP Air Tank High Pressure Hand Pump Hunting Scuba Diving Oxygen. Made of high quality stainless steel, anti-rust and durable for long lasting. High pressure air pump by hand, with oil-water separator, compress dry and clean air into oxygen cylinder. With ergonomic design, easy to pump, convenient to operate, time-saving and labor-saving. With a pressure gauge on it, you can know when to stop inflating. Come with practical accessory for quick and easy use. Tighten the pressure relief screw before pumping up (tighten clockwise); loosen the pressure relief screw after pumping up (tighten counterclockwise). Non-explosive tube: it’s made of imported material, and with its 63MPA pressure resistant design, it is not easy to brittle in the condition of the temperature of -30°. Oil-water separator: make the gas more pure. It takes about 15 to 20 minutes to fill a 0.5L oxygen cylinder about pumping up 600 times. How to use: Please perform the pump test according to the instructions and follow the steps to pump. Working pressure: 0-40MPA (0-6000PSi). Connector type: 8MM female. Air Tube Length: Approx. 53cm / 20.9in. Connector Diameter: 3.1cm / 1.2in. Connector Length: 9.9cm / 3.9 in. Package Size: 64x 17.5 x 6 cm/ 25.19 x 6.88 x 2.36inch. 3340g/ 117.81 oz. 1 x High-pressure air pump. 3 Pack x Accessories. Cylindrical filter, sponge filter, hexagonal tool, test plug, car connector. Pump base, first-stage piston O-ring, third-stage piston, piston bead, piston head, gasket, activated carbon filter. The high-pressure air pump is a backup air source. Only as a last resort should you use it. Before use, please perform the inflation test according to the instructions and refer to the relevant steps to inflate. 0.5L oxygen cylinder requires about 600 pumps. After testing, Only two adult men take turns pumping for 15-20 minutes, can the oxygen cylinder be filled up. The pumping efficiency is increased by 20%. 24 pumps = 1MPA, so you can lose weight during pumping. During the pumping process, the high-pressure pump generates heat due to friction, so it is normal for the tube to heat up, but be careful with this condition. If you encounter any trouble. Please give us an opportunity to resolve any problems. We understand the concerns and frustrations you might have and we will try our best to service for you. We care about our valued customers and want to build a long-term business relationship with you, so please help us to make better. The item “4 Stage 6000PSI PCP Air Tank High Pressure Hand Pump Hunting Scuba Diving Oxygen” is in sale since Wednesday, August 5, 2020. This item is in the category “Sporting Goods\Water Sports\Scuba & Snorkeling\Tanks”. The seller is “jchou_fast” and is located in ShenZhen. This item can be shipped to United States, all countries in continental Asia, Canada, Mexico.
  • Air Tube Length: Approx. 53cm / 20.9in
  • Brand: Unbranded
  • Connector Diameter: 3.1cm / 1.2in
  • Connector Length:: 9.9cm / 3.9in
  • Connector type: 8MM female
  • Country/Region of Manufacture: China
  • Custom Bundle: No
  • Main Function: The pumping efficiency is increased by 20%
  • Material: Stainless Steel
  • Model: High-pressure air pump
  • Modified Item: No
  • MPN: Does Not Apply
  • Package Size: 64×17.5×6 cm/25.19×6.88×2.36inch
  • Package Weight: Approx. 3340g/117.81oz
  • Stage: 4 Stage
  • Working pressure: 0-40MPA (0-6000PSi)

4 Stage 6000PSI PCP Air Tank High Pressure Hand Pump Hunting Scuba Diving Oxygen

Updated Diving High Pressure Hand Air pump Oxygen Tank Inflator+Pressure Gauge

Updated Diving High Pressure Hand Air pump Oxygen Tank Inflator+Pressure Gauge
Updated Diving High Pressure Hand Air pump Oxygen Tank Inflator+Pressure Gauge
Updated Diving High Pressure Hand Air pump Oxygen Tank Inflator+Pressure Gauge
Updated Diving High Pressure Hand Air pump Oxygen Tank Inflator+Pressure Gauge
Updated Diving High Pressure Hand Air pump Oxygen Tank Inflator+Pressure Gauge
Updated Diving High Pressure Hand Air pump Oxygen Tank Inflator+Pressure Gauge
Updated Diving High Pressure Hand Air pump Oxygen Tank Inflator+Pressure Gauge
Updated Diving High Pressure Hand Air pump Oxygen Tank Inflator+Pressure Gauge
Updated Diving High Pressure Hand Air pump Oxygen Tank Inflator+Pressure Gauge
Updated Diving High Pressure Hand Air pump Oxygen Tank Inflator+Pressure Gauge
Updated Diving High Pressure Hand Air pump Oxygen Tank Inflator+Pressure Gauge
Updated Diving High Pressure Hand Air pump Oxygen Tank Inflator+Pressure Gauge

Updated Diving High Pressure Hand Air pump Oxygen Tank Inflator+Pressure Gauge
Updated Diving High Pressure Hand Air pump Oxygen Tank Inflator+Pressure Gauge. Made of high quality stainless steel, anti-rust and durable for long lasting. High pressure air pump by hand, with oil-water separator, compress dry and clean air into oxygen cylinder. With ergonomic design, easy to pump, convenient to operate, time-saving and labor-saving. With a pressure gauge on it, you can know when to stop inflating. Come with practical accessory for quick and easy use. Tighten the pressure relief screw before pumping up (tighten clockwise); loosen the pressure relief screw after pumping up (tighten counterclockwise). Non-explosive tube: it’s made of imported material, and with its 63MPA pressure resistant design, it is not easy to brittle in the condition of the temperature of -30°. Oil-water separator: make the gas more pure. It takes about 15 to 20 minutes to fill a 0.5L oxygen cylinder about pumping up 600 times. How to use: Please perform the pump test according to the instructions and follow the steps to pump. Working pressure: 0-40MPA (0-6000PSi). Connector type: 8MM female. Air Tube Length: Approx. 53cm / 20.9in. Connector Diameter: 3.1cm / 1.2in. Connector Length: 9.9cm / 3.9 in. Package Size: 64x 17.5 x 6 cm/ 25.19 x 6.88 x 2.36inch. 3340g/ 117.81 oz. 1 x High-pressure air pump. 3 Pack x Accessories. Cylindrical filter, sponge filter, hexagonal tool, test plug, car connector. Pump base, first-stage piston O-ring, third-stage piston, piston bead, piston head, gasket, activated carbon filter. The high-pressure air pump is a backup air source. Only as a last resort should you use it. Before use, please perform the inflation test according to the instructions and refer to the relevant steps to inflate. 0.5L oxygen cylinder requires about 600 pumps. After testing, Only two adult men take turns pumping for 15-20 minutes, can the oxygen cylinder be filled up. The pumping efficiency is increased by 20%. 24 pumps = 1MPA, so you can lose weight during pumping. During the pumping process, the high-pressure pump generates heat due to friction, so it is normal for the tube to heat up, but be careful with this condition. The item “Updated Diving High Pressure Hand Air pump Oxygen Tank Inflator+Pressure Gauge” is in sale since Friday, June 5, 2020. This item is in the category “Sporting Goods\Scuba & Snorkelling\Cylinders & Tanks”. The seller is “noble_toc” and is located in ShenZhen. This item can be shipped to all countries in Europe, all countries in continental Asia, Canada.
  • Air Tube Length: Approx. 53cm / 20.9in
  • Brand: Unbranded
  • Connector Diameter: 3.1cm / 1.2in
  • Connector Length:: 9.9cm / 3.9in
  • Connector type: 8MM female
  • Country/Region of Manufacture: China
  • Custom Bundle: No
  • Material: Stainless Steel
  • Modified Item: No
  • MPN: Does Not Apply
  • Package Size: 64×17.5×6 cm/25.19×6.88×2.36inch
  • Package Weight: Approx. 3340g/117.81oz
  • Working pressure: 0-40MPA (0-6000PSi)

Updated Diving High Pressure Hand Air pump Oxygen Tank Inflator+Pressure Gauge

4500PSI 63MPA High Pressure Hand Air Pump PCP Scuba Diving Tank Refill 3 Stage

4500PSI 63MPA High Pressure Hand Air Pump PCP Scuba Diving Tank Refill 3 Stage
4500PSI 63MPA High Pressure Hand Air Pump PCP Scuba Diving Tank Refill 3 Stage
4500PSI 63MPA High Pressure Hand Air Pump PCP Scuba Diving Tank Refill 3 Stage
4500PSI 63MPA High Pressure Hand Air Pump PCP Scuba Diving Tank Refill 3 Stage
4500PSI 63MPA High Pressure Hand Air Pump PCP Scuba Diving Tank Refill 3 Stage
4500PSI 63MPA High Pressure Hand Air Pump PCP Scuba Diving Tank Refill 3 Stage
4500PSI 63MPA High Pressure Hand Air Pump PCP Scuba Diving Tank Refill 3 Stage
4500PSI 63MPA High Pressure Hand Air Pump PCP Scuba Diving Tank Refill 3 Stage
4500PSI 63MPA High Pressure Hand Air Pump PCP Scuba Diving Tank Refill 3 Stage
4500PSI 63MPA High Pressure Hand Air Pump PCP Scuba Diving Tank Refill 3 Stage
4500PSI 63MPA High Pressure Hand Air Pump PCP Scuba Diving Tank Refill 3 Stage

4500PSI 63MPA High Pressure Hand Air Pump PCP Scuba Diving Tank Refill 3 Stage
4500PSI 63MPA High Pressure Hand Air Pump PCP Scuba Diving Tank Refill 3 Stage. 1# High Pressure Hand Air Pump. HIGH PRESSURE WITH SAFETY. High pressure goes up to 4500psi; copper female connector sealed by polyfluorene ensures leak-free performance; 21.7 flexible micro-bore hose can bear up to 63MPA pressure, safeguarding your safety with superior quality. DURABLE WITH SMOOTH MOTION. Sleek stainless steel construction brings smooth upward and downwards motion; 8mm copper female quick connector allows this pump to withstand over 10,000 times of tear and wear. Comes with oil and water separator for convenient operation; TPR padded grips for fatigue-free hand feelings, large gauge provides easy-to-read parameters. COMPACT & FOLDABLE FOR EASY STORAGE. 5mm foldable pedal for easy storage and transport, perfect to carry it around in your vehicle for unexpected use. Precisely shows the pressure with no air leaking, you can know when to stop inflating. Use top-grade material, anti-crack, low temperature is not easy to crisp. Tighten the pressure relief screw before inflating air (clockwise). Loosen the pressure relief screw to release the air after inflation completed. Make sure the tightness before using it. Make sure the high tightness between the connector and the air tank to avoid leaking. (Refer to the manual). Connect the high-pressure pump to the scuba tank. Close the pressure relief valve. Start to inflate and stop inflating when the air pressure reaches to 3000 psi or 200 bar. Open the pressure relief valve to relieve pressure. Pull out the scuba tank, and the inflation is completed. Net weight: about 2.5KG/5.51 Pounds. 61.5cm/24.21 inch. 25.6cm/10.08 inch. Air tube range: approx. Separator (L x W): approx. 9 x 3.1cm/3.54 x 1.22 inch. 1 Set of Accessories. We highly recommend inflating your air tank by air compressor machine, the air pump just for emergency use. 2# Only Scuba Adaptor with Hose. High pressure hose with stainless steel spring protector. Higher pressure resistance This fill station Knob type exhaust valve, exhaust is very smooth The DIN fitting(G5/8) will fit diving cylinders. The hose terminates with 8mm stainless quick coupler socket 8mm Ball Type LockDurable And Easy to aperate. Specifications: Material: aluminium alloy+ stainless steel Hose Length: 50cm / 19.7inch W. P: 160MPa/1600Bar/23206PSI Thread: DIN(G5/8) Hose quick coupler Thread: 8mm Weight: 290g Packing size: 18124cm. Package Includes: 1 x Scuba Adaptor with Hose. If you encounter any trouble. Please give us an opportunity to resolve any problems. We understand the concerns and frustrations you might have and we will try our best to service for you. We care about our valued customers and want to build a long-term business relationship with you, so please help us to make better. Welcome to our store! If you were not satisfied when you have received the item(s), please return it/them. Please contact me before you return it;If you do not receive the itemwe offer a. If you are willing return item back to us, please keep it in original package. We value your feedback so we will endeavor to respond to all inquiries. & Public holiday excluded. We would like to. Your action will help us offer our milk and bread. The item “4500PSI 63MPA High Pressure Hand Air Pump PCP Scuba Diving Tank Refill 3 Stage” is in sale since Thursday, July 2, 2020. This item is in the category “Sporting Goods\Water Sports\Scuba & Snorkeling\Tanks”. The seller is “noble_coo” and is located in ShenZhen. This item can be shipped to United States, all countries in continental Asia, Canada, Mexico.
  • Brand: Unbranded
  • Bundle Description: Hand Pump + Accessories
  • COMPACT & FOLDABLE FOR EASY STORAGE: 5mm foldable pedal for easy storage and transport
  • Connector: 8mm Female Quick Connector
  • Custom Bundle: No
  • Display: Pressure Gauge
  • DURABLE WITH SMOOTH MOTION: sleek stainless steel
  • Efficiency: 6-7 min (0.5L Tank)
  • HIGH PRESSURE WITH SAFETY: high pressure goes up to 4500psi
  • Material: Stainless Steel
  • Measuring Range: 0-40MPA
  • Modified Item: No
  • MPN: Does Not Apply
  • Net weight: about 2.5KG/5.51 Pounds
  • OIL-WATER SEPARATOR: anti-crack, low temperature is not easy to crisp
  • Pressure Grade: 4500psi
  • USER-FRIENDLY DESIGNS: Comes with oil and water separator for convenient operation
  • VISIBLE PRESSURE GAUGE: Precisely shows the pressure with no air leaking

4500PSI 63MPA High Pressure Hand Air Pump PCP Scuba Diving Tank Refill 3 Stage

4 Gallon 4.0mm Nozzle High Pressure Pot Tank Air Paint Spray Gun Painting 2 Hose

4 Gallon 4.0mm Nozzle High Pressure Pot Tank Air Paint Spray Gun Painting 2 Hose
4 Gallon 4.0mm Nozzle High Pressure Pot Tank Air Paint Spray Gun Painting 2 Hose
4 Gallon 4.0mm Nozzle High Pressure Pot Tank Air Paint Spray Gun Painting 2 Hose
4 Gallon 4.0mm Nozzle High Pressure Pot Tank Air Paint Spray Gun Painting 2 Hose
4 Gallon 4.0mm Nozzle High Pressure Pot Tank Air Paint Spray Gun Painting 2 Hose
4 Gallon 4.0mm Nozzle High Pressure Pot Tank Air Paint Spray Gun Painting 2 Hose
4 Gallon 4.0mm Nozzle High Pressure Pot Tank Air Paint Spray Gun Painting 2 Hose
4 Gallon 4.0mm Nozzle High Pressure Pot Tank Air Paint Spray Gun Painting 2 Hose
4 Gallon 4.0mm Nozzle High Pressure Pot Tank Air Paint Spray Gun Painting 2 Hose
4 Gallon 4.0mm Nozzle High Pressure Pot Tank Air Paint Spray Gun Painting 2 Hose
4 Gallon 4.0mm Nozzle High Pressure Pot Tank Air Paint Spray Gun Painting 2 Hose
4 Gallon 4.0mm Nozzle High Pressure Pot Tank Air Paint Spray Gun Painting 2 Hose

4 Gallon 4.0mm Nozzle High Pressure Pot Tank Air Paint Spray Gun Painting 2 Hose
This paint pressure pot is made of high-quality metal material, has the anti-rust function, and is very durable. All delicate components can be used for a long time. Pressure pots for painting have a 15 liters (4 gallons) volume pressure tank, which is suitable for large-capacity paint and industrial applications. Pressure gauge and fluid pressure regulator ensure accurate setting, safety and stability, and long service life. Nozzle of this paint pressure pot is a simple operation, uniform atomization, improved work efficiency, suitable for spraying various solvents and water-based coatings. Painting pressure pot is widely used in automotive, oil-based, latex, varnish, paint, primer, wood coating, adhesive, and other coatings. Note: Check whether there is still pressure in the tank every time before opening the lid. If so, release with an air pressure relief valve. Pressure pots for painting adopt thickened watering can design, made of high-quality metal material, corrosion resistance, acid, and alkali resistance. Fast And Firm Lock. Paint pot features quick-lock seal system, effective closure, prevent waste of extra paint, energy-saving and environmental protection. This 15-gallon pressure pot features a precision barometer, Air pressure adjustment knob, and safety-valve, ensures safe operation. If the flow regulating valve is loose, the oil output will be more and more, and if the flow regulating valve is tight, the paint volume will be thinner and thinner. If necessary, the flow regulating valve can be adjusted to achieve the ideal atomization effect. Nozzle adopts ergonomic design, flexible operation, trigger switch, porous nozzle, more accurate and efficient operation. The paint pressure pot is suitable for use in commercial paints or where a large amount of spray is required, such as commercial trucks, vans, buses, or construction and industrial finishing. 15 L/4 Gallons Paint Tank Pressure Paint Pot. Commercial gallon paint pressure tank equips with a W-77 air paint sprayer gun and 4.0 mm nozzle. Excellent for commercial painting or situations where a large amount of spraying is required. Tank Capacity: 15 L/4 gallon. Air Inlet: 1/4 (6.35 mm). Dope Outlet: 3/8 (9.5 mm). Hose Length: 3 m (10′). Gross Weight: 26.5 lb (12 kg). Product Size (L x H): 9.8″ x 23.6″ (25 x 60 cm). Package Dimensions (L x W x H): 11.4″ x 11.4″ x 18.1 (29 x 29 x 46 cm). 1 x 15 L/4 Gallon 4.0 mm Nozzle Spray Paint Pressure Pot Tank Kit. We believe that it is our vision and mission to provide innovative products with best service and competitive price to satisfy you. Our goal is to make sure that you can find exactly what you are looking for and make it easy for you to place your orders. California Warehouse: City of Industry, CA. If you need to return, please check twice to confirm the item not work and contact our customer service representative, let us know the detailed problem and send us some pictures for confirmation. Please make sure that item has NO man-made sabotage. Used items will not be accepted for return. All emails will be responded to within. Special circumstances will be listed clearly in the listing. Please do check everything carefully after you received the parcel, any the damage except DOA (Dead-On-Arrival) would not be covered if it’s your fault. Caifornia Warehouse: 18501 Arenth Ave, City of Industry, CA 91748. 300 W Airtex Blvd, Suite 200, Houston, TX 77090. 2125 Gateway Blvd, Hebron, KY 41048. 1000 High Street, Perth Amboy, NJ 08861. The item “4 Gallon 4.0mm Nozzle High Pressure Pot Tank Air Paint Spray Gun Painting 2 Hose” is in sale since Monday, July 6, 2020. This item is in the category “Home & Garden\Home Improvement\Building & Hardware\Paint Sprayers & Accessories\Paint Sprayers”. The seller is “dgr4hjr_jdhqf-4″ and is located in Rowland Heights, California. This item can be shipped to United States, Canada, Mexico.
  • Brand: VEVOR
  • MPN: LXCXX0091421531363717
  • Model: 15L 4.0mm
  • Tank Capacity: 15L / 4 gallon
  • Air Inlet: 1/4″ (6.35 mm)
  • Dope Outlet: 3/8″ (9.5 mm)
  • Hose Length: 3m (10″)
  • Gross Weight: 26.5 lb (12 kg)
  • Package Dimensions: 11.4″x11.4″x18.1″

4 Gallon 4.0mm Nozzle High Pressure Pot Tank Air Paint Spray Gun Painting 2 Hose