Trumpets Size:6.5″/9.06″/11.61″/13.78″3.54 165/230/295/350×90(dia)mm. Operation Air:29-116 PSI(0.2Mpa-0.8Mpa). Material:Chrome plated zinc alloy. One-piece tank compressor system. 150DB 12V 4 Trumpet Train Horn Kit Air Horn 150 PSI Air Compressor for Car Truck. Size:15.35″x5.51″x7.09390(L)×140(W)×180(H)mm. Max Working Pressure:150 PSI. Tank Capacity:0.8GAL(3L). Pressure Switch Setting:90 PSI on, 115 PSI off. Flow Rate (0 PSI):1.17. Loud & Powerfu—-The three-trumpet air horn compressor kit will produce a powerful 150 DB sound and blare out a warning that can’t be ignored. It is designed for customers looking for a loud and affordable air horn and also for improving the safety of family and driver travel. Shiny Chrome Finish—-With a glistening chrome finishing, our air horn can cast a striking and stylish appearance on any vehicle mounted. Designed with metal chrome plated material, it also can ensure maximum strength and durability for long lasting usage. Specialized Compressor Kits—-All of our compressor systems come complete with a 12 volt compressor, air tank, pressure switch and mounting hardware. These compressor kits are built for performance and easy installation. Our specialized compressor kits will make your horns really sing. Weather Resistant—-Our new 3 trumpet air horn kit is made of heavy duty chrome trumpets that are designed for weather resistance, tough enough to withstand various weather conditions. Easy To Install—-All devices including hose and basic mounting hardware needed for installation is provided in the box. Our air horn compressor kit can be installed easily. Universal Application—-The horns are commonly installed on cars, trucks, vans, tractors etc. Meanwhile it is also extremely suitable for boats. 1 x 4-trumpet air train horn. 1 x sealing tape. Identify a suitable area for mounting, preferably an unobstructed sheet-metal surface like the frame or body of the vehicle so as to provide a firm platform which will help protect the horn from damage due to shaking. Never attach the horn to any plastic or other flexible material. Mark the spots for the holes with the bracket and then drill. The mounting hardware should be used to fasten the horn. On one side of the included 1/4 OD air line, attach the compression nut and force the air line upon the male inlet fitting which is found on the electric solenoid valve. Pass the brass nut through the inlet fitting and fasten. Take the air line’s other side and place the compression nut of the air tank fitting on it. Force the air line onto the male fitting of the tank and then fasten the compression nut. WARNING: Avoid over tightening. ON-BOARD AIR SYSTEM MOUNTING. Determine a dry place to mount your on-board air system. If you have chosen to install in the engine compartment, you should mount it as close to the front as possible to allow for maximum flow of air around. Compressor and also to avoid heat from the exhaust. Never attach the system to any plastic or other flexible material. For optimal results, the compressor should be placed as close to the battery as possible. This will reduce the amount of wiring needed. Avoid placing compressor near flammable liquids. For proper heat dissipation of the compressor never install the on-board air system upside down. Mark the spots for the holes with the mounting base as a guide and then drill. Make sure the system is secured. The check valve is an important part of the air compressor and has only one function: to let air flow from one side to the other, in this case from the compressor to the tank, while blocking air flow in the opposite direction. IMPORTANT: Do not rotate or remove the inline check valve located at the end of the hose on the side that connects to the air tank. Doing so will damage its seals and will result in damage to your air compressor. The compressor has Thermal Overload Protection, if this protection activates, cut off the source of power and let the unit cool down for about 30 minutes. This will reset the system and allow you to safely resume use of the air compressor. When the air pressure in the air tank is below the preset ON pressure (90 PSI), the compressor will automatically turn on and will start pumping air into the tank. When the pressure reaches the cut OFF pressure (110 PSI), the compressor will be automatically shut off. In this system your Pressure Switch is already wired to the air compressor. Do not modify this connection. Your system includes a 150 PSI Pressure Gauge that will measure the air pressure of the tank. The air pressure gauge is a sensitive part of the system, please avoid dropping, hitting or tighten it to the tank using a method other than the brass nut located in the back. Your system comes with a safety valve designed specifically to release pressure from the air tank automatically if 200 PSI is exceeded. This will help prevent an accident in case of pressure switch failure. This nut helps you drain the water that can collect in the air tank after long periods of use. To remove any condensation which has accumulated inside the tank, bleed the tank’s pressure until it ranges from approximately 5 PSI to 20 PSI. Remove the drain nut found at the tank’s bottom to drain the water from the tank. After draining the accumulated condensation, apply thread sealant to the nut’s thread and reinstall it. Draining the system regularly will extend the life of the air tank. International Buyers C Please Note. These charges are the buyers responsibility. Q: How do I return an item? Please contact our customer service before you return an item. We will work hard to make sure EVERY CUSTOMER 100% SATISFIED and resolve any problem for you and always leave a feedback to all our customers. If you are satisfied with the product you received, wish you can leave us a feedback. CARBON FIBER 57 JDM GT STYLE RACING WINDOW TRUNK SPOILER WING +BRACKETS. White Exterior Outside Front Right Side Outer Door Handle For 97-01 Toyota Camry. HVAC Heater Blower Motor Fan for 1993-94 Ford Ranger/87-90 Bronco II ABS Plastic. UTV & ATV Brake System Parts. Kevlar Carbon Brake Pads. Cylinder Head Gasket Sets. Brake Pads & Rotors. Brake Rotors and Pads. Brake Drum & Shoe. Nerf Bars & Running Boards. Cylinder Piston Gasket Kit. Variable Timing Solenoid (VVT). AC Condenser & Radiator. Mass Air Flow Sensor. Motorcycle Carburetor & Parts. ATV Rear Wheel Axle. ABS Wheel Speed Sensor. Idle air control valve. Transfer Case Shift Motor. Secondary Air Injection Pump. Spark Plug Ignition Wire. Air Cleaner Filter Box. C Notch & Flip Kit. Air suspension valves solenoid. Fuel Shut Off Solenoid. ATV Brake Master Cylinder. Wheel Hub Bearing Knuckle. Throttle Cable Carb Bracket. Oil Fuel Hose Line. Wheel Stem Air Valve Cap. Splash Guards & Mud Flaps. Light Bar Mount Bracket. Other Golf Cart Parts. 4 pcs wheel hub bearing. Brake Line Lock Kit. Other Handlebars & Levers. Wheel Hub Centric Rings. Kick Start Starter Lever. AC Compressor Control Valve+A. Motorcycle Brake Clutch Lever. Car Window Film Tint Tools. Lower Kits & Parts. Door Hinge Conversion Kits. Drop Spindle Lowering Kit. Blower Motor & Resistor. 12V Universal Fuel Pump Gas Diesel Inline Low Pressure HEP-02A BHEP-02A. 2pc 3157 4114 4157 LED DRL Driving Daytime Running Light Bulbs 12SMD 6000K White. Inline Universal High Pressure Fuel Pump With Installation Kit 0580464070. Fuel Pump for Chevy S10 GMC Sonoma Hombre 4.3L 97-02 for Isuzu Hombre 4.3L 97-20. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts & Accessories\Interior Parts & Accessories\Steering Wheels & Horn Buttons”. The seller is “cn-batteries” and is located in this country: US. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech Republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, Korea, South, Indonesia, Taiwan, South Africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Israel, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi Arabia, United Arab Emirates, Qatar, Kuwait, Bahrain, Croatia, Republic of, Malaysia, Antigua and Barbuda, Aruba, Belize, Dominica, Grenada, Saint Kitts-Nevis, Saint Lucia, Montserrat, Turks and Caicos Islands, Barbados, Bangladesh, Bermuda, Brunei Darussalam, Bolivia, Ecuador, Egypt, French Guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Cayman Islands, Liechtenstein, Sri Lanka, Luxembourg, Monaco, Macau, Martinique, Maldives, Nicaragua, Oman, Peru, Pakistan, Paraguay, Reunion, Vietnam, Uruguay.
- Brand: Scitoo
- Manufacturer Part Number: CB108083S01
- Type: Installation Kit
- Horn Type: High Pressure Air
- Features: Quick Release
- Material: Metal
- Color: Black
- Placement on Vehicle: Left, Right, Front, Upper, Lower
- Fitment Type: Direct Replacement
- Mounting Hardware Included: Yes
- Manufacturer Warranty: 1 Year
- Custom Bundle: No
- Modified Item: No
- Surface Finish: Coating
- Items Included: Installation Kit
- Duty cycle: 15%
- DB output: 150dB++
- Voltage: 12V/24V
