Seamax 20PSI High Pressure Portable 12V Digital Air Pump for SUP & Paddle Board

Seamax 20PSI High Pressure Portable 12V Digital Air Pump for SUP & Paddle Board
Seamax 20PSI High Pressure Portable 12V Digital Air Pump for SUP & Paddle Board
Seamax 20PSI High Pressure Portable 12V Digital Air Pump for SUP & Paddle Board
Seamax 20PSI High Pressure Portable 12V Digital Air Pump for SUP & Paddle Board
Seamax 20PSI High Pressure Portable 12V Digital Air Pump for SUP & Paddle Board
Seamax 20PSI High Pressure Portable 12V Digital Air Pump for SUP & Paddle Board
Seamax 20PSI High Pressure Portable 12V Digital Air Pump for SUP & Paddle Board
Seamax 20PSI High Pressure Portable 12V Digital Air Pump for SUP & Paddle Board

Seamax 20PSI High Pressure Portable 12V Digital Air Pump for SUP & Paddle Board
Seamax Intelligent Digital 12V DC Electric Air Pump. Designed for Inflatable SUP, Paddle Board. Easy to Reach High Pressure, Easy to Use and Easy to Carry! This Seamax intelligent DC electric air pump with a Digital pressure LCD screen is the best pump for inflatable tent, SUP, and paddle board etc. Easy to Reach High Pressure, Engineered in Canada. Max pressure can reach 20 PSI (1.378 Bar /138 Kilo-Pascal) in about 15 minutes for an inflatable paddle board. This new single stage high efficient handy air pump is with our latest standard to build. Seamax SUP20S pump has built in a digital pressure gauge to do the real time monitoring. When the pressure reading can reach the pump set value, the air pump will stop automatically. You can make sure the pressure is good before you disconnect the air hose from the chamber. When the application is 20PSI, the air hose connector will turn very tight when disconnecting. This is normal since the high pressure built up. Connect the end with Flexible conduit adaptor to the Nylon air hose (High Temperature Qualified) with the pump inflation outlet and twist clockwise to tighten it. Install the supported valve adaptor to the other end of the hose, and twist clockwise to tighten it. Then connect this air hose to the chamber and ready to go. After connecting with the power, the pump will be turned on, LCD screen is showing the reading pressure. Press the Pressure Unit button to select the pressure unit PSI or Bar. Use the Pressure Increase button (+) or Pressure Decrease button (-) to set your needed pressure. The range of pressure value is from 0.5 to 20PSI, (1PSI=0.0689BAR). Increasement is 0.5 PSI. After finishing the above steps, press the power On/Off button to start the pump. During the inflating process, you can be easy to increase or reduce the set pressure value without stopping the current pumping. Use the Unit button to switch the pressure reading in any time. Press the On/Off button to stop the pump. Pump maximum continued working time is 20 minutes in its program, and the pump can turn off by itself when 20 minutes reached. You can manually turn on the pump once again if you need more works. Comparison with Other SUP or Paddle Board 12V Electric Air Pumps. This Seamax Pump is mainly made of marine grade engineered ABS and Nylon materials. All material are durable and can offer wide range of working temperature. Regardless being used on a daily basis during the season or occasionally in a year, the quality pump can always do the good job. This Seamax Pumps reinforced hose is 3.5ft long, which is the perfect handy size for pumping SUPs and Paddleboards. The 360 degree-turning main air hose connector also provides flexible pumping positions. The Screw-in style adaptor provides perfect air tight. This design will avoid users complain against poor quality leaky air hose issues. A strong air hose will make the pumping much easier and help this electric air pump last for many years. Comparing with our quality air pump, some other similar products may only work for a few times or even damaged at the first use. Proper product engineering design and quality internal parts are very import to the longevity of a high pressure air pump. For example, it is not good if the pump major parts & cylinder are made of regular galvanized steel. For water sport use, the pump cylinder will become rusty quickly and start leaking air. This intelligent 12V DC electric pump comes with digital control and LCD screen to display the set pressure and real-time air pressure, pump can auto stop at your pre-set air pressure, pump can auto stop when max 20 minutes continued working time reached. So you can never over-inflate the chamber or damage the air pump. Thanks to the intelligent control system and its new design power unit, this air pump is great to use with your inflatable SUP, paddle board or Kayak. It can fully support from 0.5PSI to 20PSI and with long last quality. This pump is suitable for the products that are using the HR (Halkey-Roberts), Bravo or similar type air valve that suitable the most of inflatable SUPs and paddle boards in the market. This kind of air valve has a turning pin or pressing down pin at the middle to control the valves Open & Closed position. The pumps 12V DC connector (Car Cigarette Lighter connector) has a built-in 10A fuse. You can connect the pump to your vehicle. Detail instruction manual comes with every SUP-20S electric air pump. The item “Seamax 20PSI High Pressure Portable 12V Digital Air Pump for SUP & Paddle Board” is in sale since Friday, June 22, 2018. This item is in the category “Sporting Goods\Water Sports\Stand Up Paddleboarding\Accessories”. The seller is “seamaxmarine” and is located in Richmond, British Columbia. This item can be shipped worldwide.
  • MPN: Does Not Apply
  • Brand: Seamax

Seamax 20PSI High Pressure Portable 12V Digital Air Pump for SUP & Paddle Board

SMACO Manual High Pressure Air Pump Portable Mini Inflator with Pressure Gauge

SMACO Manual High Pressure Air Pump Portable Mini Inflator with Pressure Gauge
SMACO Manual High Pressure Air Pump Portable Mini Inflator with Pressure Gauge
SMACO Manual High Pressure Air Pump Portable Mini Inflator with Pressure Gauge
SMACO Manual High Pressure Air Pump Portable Mini Inflator with Pressure Gauge
SMACO Manual High Pressure Air Pump Portable Mini Inflator with Pressure Gauge
SMACO Manual High Pressure Air Pump Portable Mini Inflator with Pressure Gauge
SMACO Manual High Pressure Air Pump Portable Mini Inflator with Pressure Gauge
SMACO Manual High Pressure Air Pump Portable Mini Inflator with Pressure Gauge
SMACO Manual High Pressure Air Pump Portable Mini Inflator with Pressure Gauge
SMACO Manual High Pressure Air Pump Portable Mini Inflator with Pressure Gauge
SMACO Manual High Pressure Air Pump Portable Mini Inflator with Pressure Gauge
SMACO Manual High Pressure Air Pump Portable Mini Inflator with Pressure Gauge

SMACO Manual High Pressure Air Pump Portable Mini Inflator with Pressure Gauge
SMACO Scuba Diving Reserve Air Tank Hand Pump Oxygen Tank Mini Operated Pump SP. Made of high quality stainless steel, anti-rust and durable. High pressure air pump by hand, 53cm/20.9in length air pump tube. With a pressure gauge on it, you can know when to stop inflating. Portable and practical, essential accessory for diving. Color: Shown as pictures. Air Tube Length: Approx. 53cm / 20.9in. Connector Diameter: 3.1cm / 1.2in. Connector Length: 9cm / 3.5in. 1 High Pressure Air Pump (with Connector and Air Tube). 1 Wrench(Size: 14.8 5 0.25cm / 5.8 2.0 0.1in). 2 Packages of Accessories. High-pressure air pump, in the process of air inflating due to up and down friction, resulting in fever, this phenomenon is normal. The phenomenon of oxygen cylinder respirator can’t be inflated: firstly, when oxygen cylinder respirator is delivered, it does not contain gas, secondly, check the high-pressure pump before inflating the high-pressure pump, assemble it according to the instructions, install the gasket rubber ring, tighten the exhaust valve, and then inflate it. This product is different from oxygen pumps such as basketball, volleyball. Effectively, please be patient to inflating for two or three minutes before the pressure gauge will change. It takes three men to inflating about 16 minutes for each oxygen cylinder to fill up. Within 3000PSI, it is within the normal range. Over 3000PSI may burst (please don’t inflating too full). Oxygen cylinder head and body should be checked for tightness, good connection and not standing above the oxygen cylinder when inflating. Be careful not to inflate the oxygen cylinder to a certain pressure. Oxygen has certain impact. Please pay attention to safety. When the pump is finished, please notice that it is dangerous to twist the exhaust valve of the high-pressure pump and suddenly pull out the connecting port between the pump and the oxygen cylinder. Instead of leaving negative/neutral feedback or opening a dispute. Our listing price includes the value of goods, packaging cost, and export. Please check with your country’s. We will reply your message within 48 hours. If you do not receive our reply within 48 hours, pls. Post a message again because sometimes our message system may block some emails. If you are satisfied with our service, pls. Our aim is to provide Top Level Customer Service, your recognition will encourage us greatly and serve you better. We strive to keep all our customers satisfy. We will always do our up most to exceed your expectations in customer service, communication and dispatching of your orders. The item “SMACO Manual High Pressure Air Pump Portable Mini Inflator with Pressure Gauge” is in sale since Monday, January 14, 2019. This item is in the category “Sporting Goods\Water Sports\SCUBA & Snorkeling\Tanks”. The seller is “storeshopping2014″ and is located in Hongkong. This item can be shipped worldwide.
  • Brand: Unbranded
  • MPN: Does Not Apply

SMACO Manual High Pressure Air Pump Portable Mini Inflator with Pressure Gauge