YONG HENG AutoShut Air Compressor Pump 30Mpa 110V Electric Air Pump PCP 4500PSI

YONG HENG AutoShut Air Compressor Pump 30Mpa 110V Electric Air Pump PCP 4500PSI
YONG HENG AutoShut Air Compressor Pump 30Mpa 110V Electric Air Pump PCP 4500PSI
YONG HENG AutoShut Air Compressor Pump 30Mpa 110V Electric Air Pump PCP 4500PSI
YONG HENG AutoShut Air Compressor Pump 30Mpa 110V Electric Air Pump PCP 4500PSI
YONG HENG AutoShut Air Compressor Pump 30Mpa 110V Electric Air Pump PCP 4500PSI
YONG HENG AutoShut Air Compressor Pump 30Mpa 110V Electric Air Pump PCP 4500PSI
YONG HENG AutoShut Air Compressor Pump 30Mpa 110V Electric Air Pump PCP 4500PSI
YONG HENG AutoShut Air Compressor Pump 30Mpa 110V Electric Air Pump PCP 4500PSI
YONG HENG AutoShut Air Compressor Pump 30Mpa 110V Electric Air Pump PCP 4500PSI
YONG HENG AutoShut Air Compressor Pump 30Mpa 110V Electric Air Pump PCP 4500PSI
YONG HENG AutoShut Air Compressor Pump 30Mpa 110V Electric Air Pump PCP 4500PSI
YONG HENG AutoShut Air Compressor Pump 30Mpa 110V Electric Air Pump PCP 4500PSI

YONG HENG AutoShut Air Compressor Pump 30Mpa 110V Electric Air Pump PCP 4500PSI
You may also like. YONG HENG AutoShut Air Compressor Pump 30Mpa 110V Electric Air Pump PCP 4500PSI. 40-50L/MIN, 1.5-1.8CFM. 36 X 18 X 37CM. Manual stop/automatic stop(for optional). ISO VG46 or AW 46. 8mm quick connect fitting. DESCRIPTION YongHeng 30Mpa electric pump can be used for fire fighting, air soft, paintball, leakage detecting, pressure-tight test, automobile tyres, etc. Take out the product; install the hose at the air outlet. Note: gasket is needed, or air leakage might exist. Connect 2 cold water pipes and connect them to the water pump. Note: the lower pipe connected to the water pump is water inlet; sinking pump is used in this product. The water pump should be immersed in water for using. Install the pressure relief valve screw; pressure relief valve screw is installed at the pressure relief hole under the hose. The blow-down valve is installed at the drain outlet of the first air chamber block. Immerse the water pump in water and switch on the power. Connect the container need to be inflated, make sure the connection is correct. Screw up the screws of the blow-down valve and pressure relief valve. Switch on the power ant the machine operates. Note: when the machine is operating, the water must operate correspondingly, or the product might be damaged due to overheated, personal harm may even occur. After the inflation is completed, screw of the pressure relief valve should be firstly loosen, then the power is to be switched off, by doing so, high pressure air backlash caused due to sudden failure of power supply would be avoided, which could lengthen lifetime of the product, as well as discharge high pressure air in the machine. Please use the power supply according to the parameter table. If abnormal noise occurred during the using of the product, please stop using it instantly and check the cause. The product should be placed at a place that it couldn’ t be touched by children. Please do not use it in moist and flammable place. Please do not modify it arbitrarily, disassembling and repair by non-technical personnel is not allowed. Make sure the socket could withstand a currentgreater than 8A before using it, or the circuit might be burnt, the product might be damaged and the dangers may be caused due to overload of the socket. Please do not touch the head section after the machine was just being used, so as to not beburnt by high temperature. Please do not leave without authorized, or the product might be damaged by increasingly rising pressure, sustained overload motor, even halt due to the operation pressure has reached but it is not turned off timely. When it is used for inflating slightly larger container, the cooling water should be changed every 30 minutes, in this way, the cylinder temperature could be better controlled. The machine oil should be checked regularly, make sure the oil level is above the upper edge of the red point. If color of machine oil becomes dark and black, it should be changed in time. 1, This product is only available in the United States. As usual, it will arrive within 5-7 days without special circumstances. 3, Your order may be handled delay when weekend. We checking all items before sending out, if you received an broken / defective item, please take photos and send to us immediately. Please check our description carefully before purchasing. Please keep all the package material , return items must be in good condition. Your recognition will make us more confident to develop business and serve you better. The item “YONG HENG AutoShut Air Compressor Pump 30Mpa 110V Electric Air Pump PCP 4500PSI” is in sale since Friday, July 31, 2020. This item is in the category “Business & Industrial\Hydraulics, Pneumatics, Pumps & Plumbing\Pumps & Pump Accessories\Other Pumps”. The seller is “dealplant” and is located in US. This item can be shipped worldwide.
  • Brand: YONG HENG
  • Model: YH-QB01
  • MPN: RS-32
  • Air flow rate: 40-50L/MIN, 1.5-1.8CFM
  • Type: High Pressure
  • Motor Power: 1.8KW
  • Cooling System: Water Cooling
  • Charge pressure: 30MPA
  • Power: 110V 60HZ
  • Working Pressure: 100-300BAR,1500- 4500PSI
  • Size: 36 X 18 X 37CM
  • Warranty: 5 years
  • Noise: MAX 78DB
  • Inflating Speed: 2800R/Min
  • Compression Stage: Two Stage
  • Lubrication Mode: Splash Type
  • Material of Cover: Cast Aluminum
  • Shout down: Manual stop/automatic stop(for optional)
  • Pressure indicate: Gauge
  • Filtration: Water/oil separator
  • Lubricating oil: ISO VG46 or AW 46
  • Air hose connection: 8mm quick connect fitting

YONG HENG AutoShut Air Compressor Pump 30Mpa 110V Electric Air Pump PCP 4500PSI