4 Stage 45000PSI Hand Air Pump High Pressure Gauge Diving Oxygen Tank Refill PCP

Posted on February 8, 2021 by admin

4 Stage 45000PSI Hand Air Pump High Pressure Gauge Diving Oxygen Tank Refill PCP. HIGH PRESSURE WITH SAFETY. High pressure goes up to 4500psi; copper female connector sealed by polyfluorene ensures leak-free performance; 21.7 flexible micro-bore hose can bear up to 63MPA pressure, safeguarding your safety with superior quality. DURABLE WITH SMOOTH MOTION. Sleek stainless steel construction brings smooth upward and downwards motion; 8mm copper female quick connector allows this pump to withstand over 10,000 times of tear and wear. Comes with oil and water separator for convenient operation; TPR padded grips for fatigue-free hand feelings, large gauge provides easy-to-read parameters. COMPACT & FOLDABLE FOR EASY STORAGE. 5mm foldable pedal for easy storage and transport, perfect to carry it around in your vehicle for unexpected use. Precisely shows the pressure with no air leaking, you can know when to stop inflating. Use top-grade material, anti-crack, low temperature is not easy to crisp. Tighten the pressure relief screw before inflating air (clockwise). Loosen the pressure relief screw to release the air after inflation completed. Make sure the tightness before using it. Make sure the high tightness between the connector and the air tank to avoid leaking. (Refer to the manual). Connect the high-pressure pump to the scuba tank. Close the pressure relief valve. Start to inflate and stop inflating when the air pressure reaches to 3000 psi or 200 bar. Open the pressure relief valve to relieve pressure. Pull out the scuba tank, and the inflation is completed. Net weight: about 2.5KG/5.51 Pounds. 61.5cm/24.21 inch. 25.6cm/10.08 inch. Air tube range: approx. Separator (L x W): approx. 9 x 3.1cm/3.54 x 1.22 inch. 1 Set of Accessories. We highly recommend inflating your air tank by air compressor machine, the air pump just for emergency use. If you encounter any trouble. Please give us an opportunity to resolve any problems. We understand the concerns and frustrations you might have and we will try our best to service for you. We care about our valued customers and want to build a long-term business relationship with you, so please help us to make better. If you were not satisfied when you have received the item(s), please return it/them. Please contact me before you return it;If you do not receive the itemwe offer a. If you are willing return item back to us, please keep it in original package. We value your feedback so we will endeavor to respond to all inquiries. & Public holiday excluded. We would like to. Your action will help us offer our milk and bread. The item “4 Stage 45000PSI Hand Air Pump High Pressure Gauge Diving Oxygen Tank Refill PCP” is in sale since Saturday, October 10, 2020. This item is in the category “Sporting Goods\Water Sports\Scuba & Snorkeling\Tanks”. The seller is “hsw-winer” and is located in ShenZhen. This item can be shipped to United States, all countries in continental Asia, Canada, Mexico.

Air tube range: approx. 53cm/20.87 inch
Brand: Unbranded
Bundle Description: Hand Pump + Accessories
Connector: 8mm Female Quick Connector
Custom Bundle: No
Display: Pressure Gauge
Efficiency: 6-7 min (0.5L Tank)
Handle length: approx. 25.6cm/10.08 inch
Hose length: approx. 62cm/24.41 inch
Material: Stainless Steel
Measuring Range: 0-40MPA
Modified Item: No
MPN: Does Not Apply
Net weight: about 2.5KG/5.51 Pounds
Pressure Grade: 4500psi
Separator (L x W): approx. 9 x 3.1cm/3.54 x 1.22 inch
Total length: approx. 61.5cm/24.21 inch

4 Stage 6000PSI PCP Air Tank Rifle Filling Stirrup Hand Pump High Pressure Gauge

Posted on January 26, 2021 by admin

4 Stage 6000PSI PCP Air Tank Rifle Filling Stirrup Hand Pump High Pressure Gauge. Made of high quality stainless steel, anti-rust and durable for long lasting. High pressure air pump by hand, with oil-water separator, compress dry and clean air into oxygen cylinder. With ergonomic design, easy to pump, convenient to operate, time-saving and labor-saving. With a pressure gauge on it, you can know when to stop inflating. Come with practical accessory for quick and easy use. Tighten the pressure relief screw before pumping up (tighten clockwise); loosen the pressure relief screw after pumping up (tighten counterclockwise). Non-explosive tube: it’s made of imported material, and with its 63MPA pressure resistant design, it is not easy to brittle in the condition of the temperature of -30°. Oil-water separator: make the gas more pure. It takes about 15 to 20 minutes to fill a 0.5L oxygen cylinder about pumping up 600 times. How to use: Please perform the pump test according to the instructions and follow the steps to pump. Working pressure: 0-40MPA (0-6000PSi). Connector type: 8MM female. Air Tube Length: Approx. 53cm / 20.9in. Connector Diameter: 3.1cm / 1.2in. Connector Length: 9.9cm / 3.9 in. Package Size: 64x 17.5 x 6 cm/ 25.19 x 6.88 x 2.36inch. 3340g/ 117.81 oz. 1 x High-pressure air pump. 3 Pack x Accessories. Cylindrical filter, sponge filter, hexagonal tool, test plug, car connector. Pump base, first-stage piston O-ring, third-stage piston, piston bead, piston head, gasket, activated carbon filter. The high-pressure air pump is a backup air source. Only as a last resort should you use it. Before use, please perform the inflation test according to the instructions and refer to the relevant steps to inflate. 0.5L oxygen cylinder requires about 600 pumps. After testing, Only two adult men take turns pumping for 15-20 minutes, can the oxygen cylinder be filled up. The pumping efficiency is increased by 20%. 24 pumps = 1MPA, so you can lose weight during pumping. During the pumping process, the high-pressure pump generates heat due to friction, so it is normal for the tube to heat up, but be careful with this condition. If you have any inquiry regarding the item or our service, We will try to reply any message within 24 working hours. Emails may not be monitored quickly. & Public holiday excluded. The item “4 Stage 6000PSI PCP Air Tank Rifle Filling Stirrup Hand Pump High Pressure Gauge” is in sale since Wednesday, December 9, 2020. This item is in the category “Sporting Goods\Outdoor Sports\Air Guns & Slingshots\Accessories”. The seller is “sunlight_za” and is located in ShenZhen. This item can be shipped to United States, all countries in continental Asia, Canada, Mexico.

Air Tube Length: Approx. 53cm/20.9in
Brand: Unbranded
Come with Practical Accessory: For You to Quick & Easy Use
Connector Diameter: 3.1cm/1.2in
Connector Length: 9.9cm/3.9 in
Connector Type: 8MM Female
Made of High Quality Stainless Steel: Anti-Rust and Durable for Long Lasting
Material: Stainless Steel
Model: Four Stage Upgraded PCP Hand Pump
MPN: Does Not Apply
Non-Explosive Tube: Imported Material, 63MPA Pressure Resistant Design
Note: Air Tank is Not Included
Theory: Reciprocating Pump
Type: PCP Adapter
Upgraded Function: The Pumping Efficiency is Increased by 20% Compare to Normal One
With a Pressure Gauge on it: You Can Know When to Stop Inflating
With Ergonomic Design: Easy to Pump,Convenient to Operate,Time-saving and Labor-Saving
With Oil-Water Separator: Make The Gas More ure
Working Pressure: 0-40MPA (0-6000PSi)

4 Stage 6000PSI PCP Air Tank Rifle Filling Stirrup Hand Pump High Pressure Gauge

Posted on January 25, 2021 by admin

Made of high quality stainless steel, anti-rust and durable for long lasting. High pressure air pump by hand, with oil-water separator, compress dry and clean air into oxygen cylinder. With ergonomic design, easy to pump, convenient to operate, time-saving and labor-saving. With a pressure gauge on it, you can know when to stop inflating. Come with practical accessory for quick and easy use. Tighten the pressure relief screw before pumping up (tighten clockwise); loosen the pressure relief screw after pumping up (tighten counterclockwise). Non-explosive tube: it’s made of imported material, and with its 63MPA pressure resistant design, it is not easy to brittle in the condition of the temperature of -30°. Oil-water separator: make the gas more pure. It takes about 15 to 20 minutes to fill a 0.5L oxygen cylinder about pumping up 600 times. How to use: Please perform the pump test according to the instructions and follow the steps to pump. Working pressure: 0-40MPA (0-6000PSi). Connector type: 8MM female. Air Tube Length: Approx. 53cm / 20.9in. Connector Diameter: 3.1cm / 1.2in. Connector Length: 9.9cm / 3.9 in. Package Size: 64x 17.5 x 6 cm/ 25.19 x 6.88 x 2.36inch. 3340g/ 117.81 oz. 1 x High-pressure air pump. 3 Pack x Accessories. Cylindrical filter, sponge filter, hexagonal tool, test plug, car connector. Pump base, first-stage piston O-ring, third-stage piston, piston bead, piston head, gasket, activated carbon filter. The high-pressure air pump is a backup air source. Only as a last resort should you use it. Before use, please perform the inflation test according to the instructions and refer to the relevant steps to inflate. 0.5L oxygen cylinder requires about 600 pumps. After testing, Only two adult men take turns pumping for 15-20 minutes, can the oxygen cylinder be filled up. The pumping efficiency is increased by 20%. 24 pumps = 1MPA, so you can lose weight during pumping. During the pumping process, the high-pressure pump generates heat due to friction, so it is normal for the tube to heat up, but be careful with this condition. We will respond and solve your issue ASAP. Our goal is to provide excellent before and after sales services to all our customers. (except weekends and holidays). The item “4 Stage 6000PSI PCP Air Tank Rifle Filling Stirrup Hand Pump High Pressure Gauge” is in sale since Thursday, December 17, 2020. This item is in the category “Sporting Goods\Outdoor Sports\Air Guns & Slingshots\Accessories”. The seller is “clever-vy” and is located in ShenZhen. This item can be shipped to United States, all countries in continental Asia, Canada, Mexico.

Air Tube Length: Approx. 53cm/20.9in
Brand: Unbranded
Come with Practical Accessory: For You to Quick & Easy Use
Connector Diameter: 3.1cm/1.2in
Connector Length: 9.9cm/3.9 in
Connector Type: 8MM Female
Made of High Quality Stainless Steel: Anti-Rust and Durable for Long Lasting
Material: Stainless Steel
Model: Four Stage Upgraded PCP Hand Pump
MPN: Does Not Apply
Non-Explosive Tube: Imported Material, 63MPA Pressure Resistant Design
Note: Air Tank is Not Included
Theory: Reciprocating Pump
Type: PCP Adapter
Upgraded Function: The Pumping Efficiency is Increased by 20% Compare to Normal One
With a Pressure Gauge on it: You Can Know When to Stop Inflating
With Ergonomic Design: Easy to Pump,Convenient to Operate,Time-saving and Labor-Saving
With Oil-Water Separator: Make The Gas More ure
Working Pressure: 0-40MPA (0-6000PSi)

4 Stage 30Mpa 4500psi PCP Paintball Air Rifle hand pump High pressure Compressor

Posted on January 20, 2021 by admin

4 Stage 30Mpa 4500psi PCP Paintball Air Rifle hand pump High pressure Mini Compressor. How long will it take to fill a 450cc tank? The first time you fill it will take a longer as you are going from 0-3,000 psi. So the first time like 20-30 min. It will take at least 15 pumps for every 10 bar pressure of your need in the 450cc tank. It all depends on how tough you are really. Can I use this with paintball air tanks or the Pioneer Air bow? If you have the right fill adapter for the connector. You can fill them that has a 8mm female Foster quick-disconnect on the end of the pump hose. How long is the microbore hose? There is a 50cm(20INCH) hose with the pump. AGH do custom assembly or offer OEM pcp hand pump product? Our factory has gained a lot of experience on OEM pcp hand pump assembly of air pump & air compressor. 1.3-stage pump chambers. Max pressure:4500psi/310bar(better than competitors: 3300psi). With a female foster quick-disconnect(universal M101) on the end of the hose. Size:Length closed 630mm, Length opened 1100mm. Material: copper and stainess steel and Aluminum alloy. Big high pressure pcp hand pump air filter. This air pump pcp high pressure is used for air driving cylinder and PCP cylinder. Safe and convenience to bring outside for sporting and hunting. PCP pistols & rifles and any brand of PCP gun with a male Foster quick-disconnect on its reservoir. (use only the correct pressure rated for your gun) (although some of the guns listed above operate on a max pressure of 2000 or 3,000 psi). Generation 4 technology requires less effort than competitors. Compartment in handle holds spare parts. Requires less effort than other pumps. Does not heat up with constant use. Integral air pressure gauge 6000psi. The item “4 Stage 30Mpa 4500psi PCP Paintball Air Rifle hand pump High pressure Compressor” is in sale since Saturday, October 17, 2020. This item is in the category “Sporting Goods\Outdoor Sports\Air Guns & Slingshots\Accessories”. The seller is “blikiday” and is located in china. This item can be shipped worldwide.

Standard or Nonstandard: Standard
Usage: Air Pump
Theory: Reciprocating Pump
Fuel: Pneumatic
Material: stainless steel, aluminium
Model Number: AGH-BZ
Type: PCP Hand Pump
Structure: Multistage Pump
Pressure: High Pressure
Application: PCP hand pump
MPN: Does not apply
Brand: AGH

4 Stage 45000PSI Hand Air Pump High Pressure Gauge Diving Oxygen Tank Refill PCP

Posted on January 19, 2021 by admin

HIGH PRESSURE WITH SAFETY. High pressure goes up to 4500psi; copper female connector sealed by polyfluorene ensures leak-free performance; 21.7 flexible micro-bore hose can bear up to 63MPA pressure, safeguarding your safety with superior quality. DURABLE WITH SMOOTH MOTION. Sleek stainless steel construction brings smooth upward and downwards motion; 8mm copper female quick connector allows this pump to withstand over 10,000 times of tear and wear. Comes with oil and water separator for convenient operation; TPR padded grips for fatigue-free hand feelings, large gauge provides easy-to-read parameters. COMPACT & FOLDABLE FOR EASY STORAGE. 5mm foldable pedal for easy storage and transport, perfect to carry it around in your vehicle for unexpected use. Precisely shows the pressure with no air leaking, you can know when to stop inflating. Use top-grade material, anti-crack, low temperature is not easy to crisp. Tighten the pressure relief screw before inflating air (clockwise). Loosen the pressure relief screw to release the air after inflation completed. Make sure the tightness before using it. Make sure the high tightness between the connector and the air tank to avoid leaking. (Refer to the manual). Connect the high-pressure pump to the scuba tank. Close the pressure relief valve. Start to inflate and stop inflating when the air pressure reaches to 3000 psi or 200 bar. Open the pressure relief valve to relieve pressure. Pull out the scuba tank, and the inflation is completed. Net weight: about 2.5KG/5.51 Pounds. 61.5cm/24.21 inch. 25.6cm/10.08 inch. Air tube range: approx. Separator (L x W): approx. 9 x 3.1cm/3.54 x 1.22 inch. 1 Set of Accessories. We highly recommend inflating your air tank by air compressor machine, the air pump just for emergency use. If you encounter any trouble. Please give us an opportunity to resolve any problems. We understand the concerns and frustrations you might have and we will try our best to service for you. We care about our valued customers and want to build a long-term business relationship with you, so please help us to make better. Welcome to our store! If you were not satisfied when you have received the item(s), please return it/them. Please contact me before you return it;If you do not receive the itemwe offer a. If you are willing return item back to us, please keep it in original package. We value your feedback so we will endeavor to respond to all inquiries. & Public holiday excluded. We would like to earn your. Your action will help us offer our milk and bread. The item “4 Stage 45000PSI Hand Air Pump High Pressure Gauge Diving Oxygen Tank Refill PCP” is in sale since Tuesday, September 15, 2020. This item is in the category “Sporting Goods\Water Sports\Scuba & Snorkeling\Tanks”. The seller is “noble_coo” and is located in ShenZhen. This item can be shipped to United States, all countries in continental Asia, Canada, Mexico.

Air tube range: approx. 53cm/20.87 inch
Brand: Unbranded
Bundle Description: Hand Pump + Accessories
Connector: 8mm Female Quick Connector
Custom Bundle: No
Display: Pressure Gauge
Efficiency: 6-7 min (0.5L Tank)
Handle length: approx. 25.6cm/10.08 inch
Hose length: approx. 62cm/24.41 inch
Material: Stainless Steel
Measuring Range: 0-40MPA
Modified Item: No
MPN: Does Not Apply
Net weight: about 2.5KG/5.51 Pounds
Pressure Grade: 4500psi
Separator (L x W): approx. 9 x 3.1cm/3.54 x 1.22 inch
Total length: approx. 61.5cm/24.21 inch

4 Stage 60000PSI Hand Pump High Pressure Gauge Diving Oxygen Air Tank Rifle PCP

Posted on January 18, 2021 by admin

1# High Pressure Hand Air Pump. Made of high quality stainless steel, anti-rust and durable for long lasting. High pressure air pump by hand, with oil-water separator, compress dry and clean air into oxygen cylinder. With ergonomic design, easy to pump, convenient to operate, time-saving and labor-saving. With a pressure gauge on it, you can know when to stop inflating. Come with practical accessory for quick and easy use. Tighten the pressure relief screw before pumping up (tighten clockwise); loosen the pressure relief screw after pumping up (tighten counterclockwise). Non-explosive tube: it’s made of imported material, and with its 63MPA pressure resistant design, it is not easy to brittle in the condition of the temperature of -30°. Oil-water separator: make the gas more pure. It takes about 15 to 20 minutes to fill a 0.5L oxygen cylinder about pumping up 600 times. How to use: Please perform the pump test according to the instructions and follow the steps to pump. Working pressure: 0-40MPA (0-6000PSi). Connector type: 8MM female. Air Tube Length: Approx. 53cm / 20.9in. Connector Diameter: 3.1cm / 1.2in. Connector Length: 9.9cm / 3.9 in. Package Size: 64x 17.5 x 6 cm/ 25.19 x 6.88 x 2.36inch. 3340g/ 117.81 oz. 1 x High-pressure air pump. 3 Pack x Accessories. Cylindrical filter, sponge filter, hexagonal tool, test plug, car connector. Pump base, first-stage piston O-ring, third-stage piston, piston bead, piston head, gasket, activated carbon filter. The high-pressure air pump is a backup air source. Only as a last resort should you use it. Before use, please perform the inflation test according to the instructions and refer to the relevant steps to inflate. 0.5L oxygen cylinder requires about 600 pumps. After testing, Only two adult men take turns pumping for 15-20 minutes, can the oxygen cylinder be filled up. The pumping efficiency is increased by 20%. 24 pumps = 1MPA, so you can lose weight during pumping. During the pumping process, the high-pressure pump generates heat due to friction, so it is normal for the tube to heat up, but be careful with this condition. 2# Only Scuba Adaptor with Hose. High pressure hose with stainless steel spring protector. Higher pressure resistance This fill station Knob type exhaust valve, exhaust is very smooth The DIN fitting(G5/8) will fit diving cylinders. The hose terminates with 8mm stainless quick coupler socket 8mm Ball Type LockDurable And Easy to aperate. Specifications: Material: aluminium alloy+ stainless steel Hose Length: 50cm / 19.7inch W. P: 160MPa/1600Bar/23206PSI Thread: DIN(G5/8) Hose quick coupler Thread: 8mm Weight: 290g Packing size: 18124cm. Package Includes: 1 x Scuba Adaptor with Hose. If you encounter any trouble. Please give us an opportunity to resolve any problems. We understand the concerns and frustrations you might have and we will try our best to service for you. We care about our valued customers and want to build a long-term business relationship with you, so please help us to make better. Welcome to our store! If you were not satisfied when you have received the item(s), please return it/them. Please contact me before you return it;If you do not receive the itemwe offer a. If you are willing return item back to us, please keep it in original package. We value your feedback so we will endeavor to respond to all inquiries. & Public holiday excluded. We would like to earn your. Your action will help us offer our milk and bread. The item “4 Stage 60000PSI Hand Pump High Pressure Gauge Diving Oxygen Air Tank Rifle PCP” is in sale since Wednesday, August 5, 2020. This item is in the category “Sporting Goods\Scuba & Snorkelling\Cylinders & Tanks”. The seller is “dst-dd” and is located in ShenZhen. This item can be shipped to all countries in Europe, all countries in continental Asia, Canada.

Air Tube Length: Approx. 53cm / 20.9in
Brand: Unbranded
Come with practical accessory: For quick and easy use
Connector Diameter: 3.1cm / 1.2in
Connector Length:: 9.9cm / 3.9in
Connector type: 8MM female
Country/Region of Manufacture: China
Custom Bundle: No
DURABLE WITH SMOOTH MOTION: sleek stainless steel
HIGH PRESSURE WITH SAFETY: high pressure goes up to 60000psi
Main Function: The pumping efficiency is increased by 20%
Material: Stainless Steel
Model: High-pressure air pump
Modified Item: No
MPN: Does Not Apply
OIL-WATER SEPARATOR: make the gas more pure
Package Size: 64×17.5×6 cm/25.19×6.88×2.36inch
Package Weight: Approx. 3340g/117.81oz
Stage: 4 Stage
With a pressure gauge on it: You can know when to stop inflating.
With ergonomic design: Easy to pump, convenient to operate, time-saving and labor-saving
Working pressure: 0-40MPA (0-6000PSi)

4 Stage 6000PSI PCP Air Tank High Pressure Hand Pump Hunting Scuba Diving Oxygen

Posted on October 25, 2020 by admin

4 Stage 6000PSI PCP Air Tank High Pressure Hand Pump Hunting Scuba Diving Oxygen. Made of high quality stainless steel, anti-rust and durable for long lasting. High pressure air pump by hand, with oil-water separator, compress dry and clean air into oxygen cylinder. With ergonomic design, easy to pump, convenient to operate, time-saving and labor-saving. With a pressure gauge on it, you can know when to stop inflating. Come with practical accessory for quick and easy use. Tighten the pressure relief screw before pumping up (tighten clockwise); loosen the pressure relief screw after pumping up (tighten counterclockwise). Non-explosive tube: it’s made of imported material, and with its 63MPA pressure resistant design, it is not easy to brittle in the condition of the temperature of -30°. Oil-water separator: make the gas more pure. It takes about 15 to 20 minutes to fill a 0.5L oxygen cylinder about pumping up 600 times. How to use: Please perform the pump test according to the instructions and follow the steps to pump. Working pressure: 0-40MPA (0-6000PSi). Connector type: 8MM female. Air Tube Length: Approx. 53cm / 20.9in. Connector Diameter: 3.1cm / 1.2in. Connector Length: 9.9cm / 3.9 in. Package Size: 64x 17.5 x 6 cm/ 25.19 x 6.88 x 2.36inch. 3340g/ 117.81 oz. 1 x High-pressure air pump. 3 Pack x Accessories. Cylindrical filter, sponge filter, hexagonal tool, test plug, car connector. Pump base, first-stage piston O-ring, third-stage piston, piston bead, piston head, gasket, activated carbon filter. The high-pressure air pump is a backup air source. Only as a last resort should you use it. Before use, please perform the inflation test according to the instructions and refer to the relevant steps to inflate. 0.5L oxygen cylinder requires about 600 pumps. After testing, Only two adult men take turns pumping for 15-20 minutes, can the oxygen cylinder be filled up. The pumping efficiency is increased by 20%. 24 pumps = 1MPA, so you can lose weight during pumping. During the pumping process, the high-pressure pump generates heat due to friction, so it is normal for the tube to heat up, but be careful with this condition. If you encounter any trouble. Please give us an opportunity to resolve any problems. We understand the concerns and frustrations you might have and we will try our best to service for you. We care about our valued customers and want to build a long-term business relationship with you, so please help us to make better. The item “4 Stage 6000PSI PCP Air Tank High Pressure Hand Pump Hunting Scuba Diving Oxygen” is in sale since Wednesday, August 5, 2020. This item is in the category “Sporting Goods\Scuba & Snorkelling\Cylinders & Tanks”. The seller is “bloomyield_inc” and is located in ShenZhen. This item can be shipped to all countries in Europe, all countries in continental Asia, Canada.

Air Tube Length: Approx. 53cm / 20.9in
Brand: Unbranded
Connector Diameter: 3.1cm / 1.2in
Connector Length:: 9.9cm / 3.9in
Connector type: 8MM female
Country/Region of Manufacture: China
Custom Bundle: No
Material: Stainless Steel
Modified Item: No
MPN: Does Not Apply
Package Size: 64×17.5×6 cm/25.19×6.88×2.36inch
Package Weight: Approx. 3340g/117.81oz
Working pressure: 0-40MPA (0-6000PSi)

4 Stage 6000PSI PCP Air Gun Rifle Filling Stirrup Hand Pump High Pressure Gauge

Posted on October 16, 2020 by admin

4 Stage 6000PSI PCP Air Gun Rifle Filling Stirrup Hand Pump High Pressure Gauge. The pumping efficiency is increased by 20%. Made of high quality stainless steel, anti-rust and durable for long lasting. High pressure air pump by hand, with oil-water separator, compress dry and clean air into oxygen cylinder. With ergonomic design, easy to pump, convenient to operate, time-saving and labor-saving. With a pressure gauge on it, you can know when to stop inflating. Come with practical accessory for quick and easy use. Tighten the pressure relief screw before pumping up (tighten clockwise); loosen the pressure relief screw after pumping up (tighten counterclockwise). Non-explosive tube: it’s made of imported material, and with its 63MPA pressure resistant design, it is not easy to brittle in the condition of the temperature of -30°. Oil-water separator: make the gas more pure. It takes about 15 to 20 minutes to fill a 0.5L oxygen cylinder about pumping up 600 times. How to use: Please perform the pump test according to the instructions and follow the steps to pump. Working pressure: 0-40MPA (0-6000PSi). Connector type: 8MM female. Air Tube Length: Approx. 53cm / 20.9in. Connector Diameter: 3.1cm / 1.2in. Connector Length: 9.9cm / 3.9 in. Package Size: 64x 17.5 x 6 cm/ 25.19 x 6.88 x 2.36inch. 3340g/ 117.81 oz. 1 x High-pressure air pump. 3 Pack x Accessories. Cylindrical filter, sponge filter, hexagonal tool, test plug, car connector. Pump base, first-stage piston O-ring, third-stage piston, piston bead, piston head, gasket, activated carbon filter. The high-pressure air pump is a backup air source. Only as a last resort should you use it. Before use, please perform the inflation test according to the instructions and refer to the relevant steps to inflate. 0.5L oxygen cylinder requires about 600 pumps. After testing, Only two adult men take turns pumping for 15-20 minutes, can the oxygen cylinder be filled up. 24 pumps = 1MPA, so you can lose weight during pumping. During the pumping process, the high-pressure pump generates heat due to friction, so it is normal for the tube to heat up, but be careful with this condition. If you have any inquiry regarding the item or our service, We will try to reply any message within 24 working hours. Emails may not be monitored quickly. & Public holiday excluded. The item “4 Stage 6000PSI PCP Air Gun Rifle Filling Stirrup Hand Pump High Pressure Gauge” is in sale since Saturday, August 15, 2020. This item is in the category “Sporting Goods\Outdoor Sports\Air Guns & Slingshots\Accessories”. The seller is “dst_tim” and is located in ShenZhen. This item can be shipped to United States, all countries in continental Asia, Canada, Mexico.

Air Tube Length: Approx. 53cm/20.9in
Brand: Unbranded
Come with Practical Accessory: For You to Quick & Easy Use
Connector Diameter: 3.1cm/1.2in
Connector Length: 9.9cm/3.9 in
Connector Type: 8MM Female
Made of High Quality Stainless Steel: Anti-Rust and Durable for Long Lasting
Material: Stainless Steel
Model: Four Stage Upgraded PCP Hand Pump
MPN: Does Not Apply
Non-Explosive Tube: Imported Material, 63MPA Pressure Resistant Design
Note: Air Tank is Not Included
Theory: Reciprocating Pump
Type: PCP Adapter
Upgraded Function: The Pumping Efficiency is Increased by 20% Compare to Normal One
Warm Note: Please Check the Connector Size Before Order
With a Pressure Gauge on it: You Can Know When to Stop Inflating
With Ergonomic Design: Easy to Pump,Convenient to Operate,Time-saving and Labor-Saving
With Oil-Water Separator: Make The Gas More ure
Working Pressure: 0-40MPA (0-6000PSi)

4 Stage 4500PSI PCP Air Tank Rifle Filling Stirrup Hand Pump High Pressure Gauge

Posted on September 22, 2020 by admin

You may also like. 4 Stage 4500PSI PCP Air Tank Rifle Filling Stirrup Hand Pump High Pressure Gauge. 4500PSI High Pressure Pcp Hand Operated Air pump Inflator Hunting Four-Stage. Stainless steel, magnesium aluminum alloy. Four-stage compressed air pump. Length of oil-water separator. Easier pumping up and purer air intake. [Small size and large volume]. Stainless steel high-pressure pump. 30MPA 4500psi 40MPA 6000psi. Our-stage manual (about 18% faster than the third-stage). The primary tube is made of stainless steel, and the secondary tube is made of magnesium-aluminum alloy. The surface is specially treated with oil storage pores to create a seamless barrel. The anti-slip handle is designed according to ergonomics, and its thick anti-slip grip makes the grip more comfortable. This product is equipped with a luminous pressure gauge, which can display accurately, even if it is used in a dark place. This product is equipped with a foldable pedal base for easy storage and. He pedal base is covered with non-slip plastic, which is more comfortable to use. This product is equipped with an oil-water separator, which separates oil and water to make the gas cleaner and. [Explosion-proof pressure relief protection]. This product is equipped with a pressure relief screw. Tighten the pressure relief screw before pumping up (clockwise); after the pump is completed, loosen the pressure relief screw for pressure relief (counterclockwise). Which has the effect of. Xplosion-proof protection and pressure relief protection. Widely used in PCP pistols, rifles and air guns; automobile tires; motorcycle tires; bicycle tires; inflatable kayaks; inflatable balls, etc. All Products from the factory will be provided for. Feedback is very important to us. It is impossible to address issues if we do not know about them! Faction is our ultimate goal. We work hard to earn your trust and future business. A If you receive a defective item, you may return it or ask for a discount. Like LCD screen, industrial burner accessories, printer accessories, instrument accessories, and other fields solutions, we supply Sumsung, LG, AUO, Xinje, Riello, Honeywell, Dungs, Mitsubishi, Siemens, Heidelberg machine parts and The international famous brand accessories etc. Due to time zones, our reply to your questions may not be immediately. But within above working time, we w. If it’s non-workdays, please kindly be patient and wait till Monday. Product weight:2.9kg Material:Stainless steel, magnesium aluminum alloy Compression level:Four-stage compressed air pump Pressure range:0-40MPA Work pressure:0-30MPA(4500PSI) Tube length:500MM Total height:640MM Trachea length:480MM Pressure gauge diameter:45MM Length of oil-water separator:7MM Trachea width:260MM Quick Connector:8MM Tire joint:American Type Color:Black Package size:67CM28CM6CM Function 1: For car tire inflation Function 2: For bicycle inflation Function 3: balloons inflation Function 4: swimming ring inflation Function 5: basketball inflation Function 6: inflatable rubber boats inflation. The item “4 Stage 4500PSI PCP Air Tank Rifle Filling Stirrup Hand Pump High Pressure Gauge” is in sale since Wednesday, August 19, 2020. This item is in the category “Sporting Goods\Outdoor Sports\Air Guns & Slingshots\Accessories”. The seller is “industry.factory” and is located in Shenzhen. This item can be shipped to North, South, or Latin America, all countries in Europe, all countries in continental Asia, Australia.

Brand: ToAuto
SKU: SG-QSBXJQGL-4
Product weight: 2.9kg
Material: Stainless steel, magnesium aluminum alloy
Compression level: Four-stage compressed air pump
Pressure range: 0-40MPA
Work pressure: 0-30MPA(4500PSI)
Tube length: 500MM
Total height: 640MM
Trachea length: 480MM
Pressure gauge diameter: 45MM
Length of oil-water separator: 7MM
Trachea width: 260MM
Quick Connector: 8MM
Tire joint: American Type
Color: Black
Package size: 67CM*28CM*6CM
MPN: Does not apply

4 Stage 6000PSI PCP Air Tank High Pressure Hand Pump Hunting Scuba Diving Oxygen

Posted on September 22, 2020 by admin

4 Stage 6000PSI PCP Air Tank High Pressure Hand Pump Hunting Scuba Diving Oxygen. Made of high quality stainless steel, anti-rust and durable for long lasting. High pressure air pump by hand, with oil-water separator, compress dry and clean air into oxygen cylinder. With ergonomic design, easy to pump, convenient to operate, time-saving and labor-saving. With a pressure gauge on it, you can know when to stop inflating. Come with practical accessory for quick and easy use. Tighten the pressure relief screw before pumping up (tighten clockwise); loosen the pressure relief screw after pumping up (tighten counterclockwise). Non-explosive tube: it’s made of imported material, and with its 63MPA pressure resistant design, it is not easy to brittle in the condition of the temperature of -30°. Oil-water separator: make the gas more pure. It takes about 15 to 20 minutes to fill a 0.5L oxygen cylinder about pumping up 600 times. How to use: Please perform the pump test according to the instructions and follow the steps to pump. Working pressure: 0-40MPA (0-6000PSi). Connector type: 8MM female. Air Tube Length: Approx. 53cm / 20.9in. Connector Diameter: 3.1cm / 1.2in. Connector Length: 9.9cm / 3.9 in. Package Size: 64x 17.5 x 6 cm/ 25.19 x 6.88 x 2.36inch. 3340g/ 117.81 oz. 1 x High-pressure air pump. 3 Pack x Accessories. Cylindrical filter, sponge filter, hexagonal tool, test plug, car connector. Pump base, first-stage piston O-ring, third-stage piston, piston bead, piston head, gasket, activated carbon filter. The high-pressure air pump is a backup air source. Only as a last resort should you use it. Before use, please perform the inflation test according to the instructions and refer to the relevant steps to inflate. 0.5L oxygen cylinder requires about 600 pumps. After testing, Only two adult men take turns pumping for 15-20 minutes, can the oxygen cylinder be filled up. The pumping efficiency is increased by 20%. 24 pumps = 1MPA, so you can lose weight during pumping. During the pumping process, the high-pressure pump generates heat due to friction, so it is normal for the tube to heat up, but be careful with this condition. If you encounter any trouble. Please give us an opportunity to resolve any problems. We understand the concerns and frustrations you might have and we will try our best to service for you. We care about our valued customers and want to build a long-term business relationship with you, so please help us to make better. The item “4 Stage 6000PSI PCP Air Tank High Pressure Hand Pump Hunting Scuba Diving Oxygen” is in sale since Wednesday, August 5, 2020. This item is in the category “Sporting Goods\Water Sports\Scuba & Snorkeling\Tanks”. The seller is “jchou_fast” and is located in ShenZhen. This item can be shipped to United States, all countries in continental Asia, Canada, Mexico.

Air Tube Length: Approx. 53cm / 20.9in
Brand: Unbranded
Connector Diameter: 3.1cm / 1.2in
Connector Length:: 9.9cm / 3.9in
Connector type: 8MM female
Country/Region of Manufacture: China
Custom Bundle: No
Main Function: The pumping efficiency is increased by 20%
Material: Stainless Steel
Model: High-pressure air pump
Modified Item: No
MPN: Does Not Apply
Package Size: 64×17.5×6 cm/25.19×6.88×2.36inch
Package Weight: Approx. 3340g/117.81oz
Stage: 4 Stage
Working pressure: 0-40MPA (0-6000PSi)

April 2024
M	T	W	T	F	S	S
« Mar
1	2	3	4	5	6	7
8	9	10	11	12	13	14
15	16	17	18	19	20	21
22	23	24	25	26	27	28
29	30