High Pressure Air Pump Electric Air Compressor Pneumatic Airgun Scuba Rifle PCP Inflator 1.8KW 300Bar 30Mpa 4500PSI. This High Pressure 30Mpa Electric Pump has your anticipated outstanding quality and convenience. It is equipped with high pressure rubber hose for multipurpose use. Superimposed double-cylinder two-stage compressor used by this duct has the feature of large displacement and quick air inflation, which could be used for not only diving fire cylinder, but also car, lorry, truck and other automobiles. Qucik connection, fast and stable inflation. Mechanical and luminous pressure gauge indicates the pressure precisely. Save time and energy. The water and wind cooling faciliate the heat dissipation. With anti-explosive valve and large fan, makes it safe for use. Complete accessories meet your demands. Motor Power: 1.8KW. Cover Material: Cast Aluminum. Motor Material: 100% Pure Copper. Air Flow Rate: 100L/MIN. Of Female Plug: 8MM. Cooling System: Water Cooling & Wind Cooling. Check the amount of oil before each use, the oil should exceed the red dot, but not too much, the oil that is exported to foreigh countries is taken out and needs to be added by yourself. Replace the breathing plug, change the oil cover used for transportation to a strip-shaped breathing plug. Loosen the air bleed screws on both sides before starting the machine. To install the water pump, you need to put the water pump into the water, the more cold water, the better, after the water pump is normally circulated, the electric air pump can be turned on, manually shut down after reaching the required pressure, the whole cess needs attention, and it is forbidden to leave. The mechanical pressure gauge directly screws the pointer to the required pressure, when the pressure rises to the set pressure after starting, it will not automatically stop. Press the “SET” button to set the required pressure, press “ON” to start the machine, when the pressure rises to the set pressure, it will not stop automatically.
