Fleece Performance Fuel Distribution Block Hose Kit 07.5-09 Dodge 6.7L Cummins

Fleece Performance Fuel Distribution Block Hose Kit 07.5-09 Dodge 6.7L Cummins
Fleece Performance Fuel Distribution Block Hose Kit 07.5-09 Dodge 6.7L Cummins

Fleece Performance Fuel Distribution Block Hose Kit 07.5-09 Dodge 6.7L Cummins
Exhaust Manifolds & Up-Pipes. Fleece Performance Fuel Distribution Block Hose Kit 07.5-09 Dodge 6.7L Cummins. The Fleece Fuel Distribution Block Hose & Fitting Kit allows you to cleanly plumb the dual CP3 system in your 2007.5-2009 Dodge 6.7L Cummins. Works With Fleece Fuel Distribution Block. For Dual CP3 Fuel Systems. Includes Hoses & Fittings. 2007.5-2009 Ram W/ 6.7L Cummins Diesel. We value your business and we are not satisfied until you are. All of our parts and accessories are returnable and refundable. The item in which you are returning MUST be unused, uninstalled, in the original condition, and in the original packaging. If you are returning an item due to an error caused by Rudy’s Performance Parts or its business partners i. If you are sending an item back, we recommend using a service with tracking and signature confirmation. WARNING: This product may contain chemicals known to the State of California to cause cancer, birth defects or other reproductive harm. Proposition 65 requires businesses to provide warnings to Californians about significant exposures to chemicals that cause cancer, birth defects or other reproductive harm. By requiring that this information be provided, Proposition 65 enables Californians to make informed decisions about their exposures to these chemicals. Proposition 65 also prohibits California businesses from knowingly discharging significant amounts of listed chemicals into sources of drinking water. Proposition 65 requires California to publish a list of chemicals known to cause cancer, birth defects or other reproductive harm. This list, which must be updated at least once a year, has grown to include approximately 900 chemicals since it was first published in 1987. Generally, parts which alter or modify the original design or performance of a motor vehicle pollution control device or system are NOT LEGAL FOR SALE OR USE IN CALIFORNIA or other states with similar regulations. Such aftermarket parts are subject to governmental emissions standards regulated by the California Air Resources Board (CARB). In order for such parts to be legal for sale or use in the State of California, or other states with similar regulations, the part must acquire a CARB EO number so as to make it legal for use on a specific year/make/model of vehicle. CARB approved parts will include a sticker containing the CARB EO number. This sticker must be displayed in a visible location in the vehicle’s engine bay for smog inspections. Great product, just as described! Always awesome dealing with Rudy’s. Rudy’s Performance Parts was founded in 2008 and prides itself in being the industry leader in automotive performance and accessories. Rudy’s carries a wide variety of performance, suspension, exterior and interior upgrades! Whether you’re looking for a minor boost in performance, all-out drag racing and sled pulling power or a suspension upgrade to clear bigger wheels and tires, Rudy’s has you covered! Known for the best customer service and pricing in the industry, there is no question that you’ve found your one stop shop for all of your automotive upgrades! Learn More About Us. Add to Favorite Sellers. Rudy’s Performance Parts. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts & Accessories\Air & Fuel Delivery\Fuel Pumps & Sending Units”. The seller is “rudys_performance_parts” and is located in this country: US. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech Republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, Korea, South, Taiwan, South Africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Israel, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi Arabia, United Arab Emirates, Qatar, Kuwait, Bahrain, Croatia, Republic of, Malaysia, Brazil, Chile, Colombia, Costa Rica, Dominican Republic, Panama, Trinidad and Tobago, Guatemala, El Salvador, Honduras, Jamaica, Antigua and Barbuda, Aruba, Belize, Dominica, Grenada, Saint Kitts-Nevis, Saint Lucia, Montserrat, Turks and Caicos Islands, Barbados, Bangladesh, Bermuda, Brunei Darussalam, Bolivia, Ecuador, Egypt, French Guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Cayman Islands, Liechtenstein, Sri Lanka, Luxembourg, Monaco, Macau, Martinique, Maldives, Nicaragua, Oman, Peru, Pakistan, Paraguay, Reunion, Vietnam, Uruguay.
  • Country/Region of Manufacture: United States
  • Interchange Part Number: Diesel Truck Trucks Engine Performance Upgrade, Racing Pulling Pull Race Head Heads Valves, Fleece Engineering, 2016 2017 2018 67 6.7 6.7L Dodge Ram Cummins, Diesel CP3 High Pressure Fuel Block Reroute, Re-Route, 5.9L 5.9 59 59L 3rd 4th Gen 24V 6.7 6.7L 67 67L, 2nd Gen, Pump Turbo Turbocharged Turbocharger Charged, Char, Lifted Dual Fuel Fueler Airdog Air Dog Fass Lif, Dodge Ram Chrysler Mopar Cumins SL SLT Limited, 2007.5 2007 2008 2009 07.5 07 08 09
  • Manufacturer Part Number: FPE-FFD-RF-HF-KIT-3G-67
  • Fitment: Used with Fleece Fuel Distribution Block
  • Brand: Fleece Performance
  • Fitment Type: Performance/Custom

Fleece Performance Fuel Distribution Block Hose Kit 07.5-09 Dodge 6.7L Cummins

Fleece Performance Fuel Distribution Block 2007.5-2009 Dodge 6.7L Cummins Diesel

Fleece Performance Fuel Distribution Block 2007.5-2009 Dodge 6.7L Cummins Diesel
Fleece Performance Fuel Distribution Block 2007.5-2009 Dodge 6.7L Cummins Diesel
Fleece Performance Fuel Distribution Block 2007.5-2009 Dodge 6.7L Cummins Diesel
Fleece Performance Fuel Distribution Block 2007.5-2009 Dodge 6.7L Cummins Diesel

Fleece Performance Fuel Distribution Block 2007.5-2009 Dodge 6.7L Cummins Diesel
Fleece Performance Fuel Distribution Block 2007.5-2009 Dodge 6.7L Cummins Diesel. Upgrade your fuel system with this fuel distribution block from Fleece Performance Engineering. It mounts in the factory fuel filter location to allow you to use your factory return lines without any relocating or bending. It also features a port for the factory WIF (water in fuel) sensor, a 9/16-18 o-ring port (dual CP3 return port), (3) 3/4-16 o-ring ports (feed ports), and (2) 1/8 NPT ports (sensor ports). 9/16-18 o-ring to -6AN male fitting (dual CP3 return port). 9/16-18 o-ring port plug. (3) 3/4-16 o-ring to -8AN male fittings (feed ports). 3/4-16 o-ring port plug. (2) 1/8 NPT ports (sensor ports). 2007.5-2009 Ram W/ 6.7L Cummins Diesel. We value your business and we are not satisfied until you are. Rudy’s Performance Parts ships products from multiple warehouses across the country in order to get your products to you the quickest way possible. We are not able to send ANY race use products to the state of California. According to the EPA Clean Air Act, they are illegal for use on any Federal, State, or Local public highways and illegal use is punishable by the penalties enacted by the mentioned laws. Rudy’s Performance Parts does not condone or promote illegal use of these products. All of our parts and accessories are returnable and refundable. The item in which you are returning MUST be unused, uninstalled, in the original condition, and in the original packaging. If you are returning an item due to an error caused by Rudys Performance Parts or its business partners i. If you are sending an item back, we recommend using a service with tracking and signature confirmation. This product is NOT for sale or use in California. The item “Fleece Performance Fuel Distribution Block 2007.5-2009 Dodge 6.7L Cummins Diesel” is in sale since Sunday, February 21, 2021. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts & Accessories\Air & Fuel Delivery\Fuel Pumps & Sending Units”. The seller is “rudys_performance_parts” and is located in Chapel Hill, North Carolina. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Israel, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Costa rica, Dominican republic, Panama, Trinidad and tobago, Guatemala, El salvador, Honduras, Jamaica, Antigua and barbuda, Aruba, Belize, Dominica, Grenada, Saint kitts and nevis, Saint lucia, Montserrat, Turks and caicos islands, Barbados, Bangladesh, Bermuda, Brunei darussalam, Bolivia, Ecuador, Egypt, French guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Cayman islands, Liechtenstein, Sri lanka, Luxembourg, Monaco, Macao, Martinique, Maldives, Nicaragua, Oman, Peru, Pakistan, Paraguay, Reunion, Viet nam, Uruguay, Russian federation.
  • Country/Region of Manufacture: United States
  • Interchange Part Number: Diesel Truck Trucks Engine Performance Upgrade
  • Manufacturer Part Number: FPE-FFD-RF-3G-67
  • Brand: Fleece Performance
  • Fitment Type: Performance/Custom

Fleece Performance Fuel Distribution Block 2007.5-2009 Dodge 6.7L Cummins Diesel

Fleece Performance Fuel Distribution Block Hose Kit 2003-2007 Dodge 5.9L Cummins

Fleece Performance Fuel Distribution Block Hose Kit 2003-2007 Dodge 5.9L Cummins
Fleece Performance Fuel Distribution Block Hose Kit 2003-2007 Dodge 5.9L Cummins

Fleece Performance Fuel Distribution Block Hose Kit 2003-2007 Dodge 5.9L Cummins
Works With Fleece Fuel Distribution Block. For Dual CP3 Fuel Systems. Includes Hoses & Fittings. We value your business and we are not satisfied until you are. Rudy’s Performance Parts ships products from multiple warehouses across the country in order to get your products to you the quickest way possible. We are not able to send ANY race use products to the state of California. According to the EPA Clean Air Act, they are illegal for use on any Federal, State, or Local public highways and illegal use is punishable by the penalties enacted by the mentioned laws. Rudy’s Performance Parts does not condone or promote illegal use of these products. All of our parts and accessories are returnable and refundable. The item in which you are returning MUST be unused, uninstalled, in the original condition, and in the original packaging. If you are returning an item due to an error caused by Rudys Performance Parts or its business partners i. If you are sending an item back, we recommend using a service with tracking and signature confirmation. This product is NOT for sale or use in California. The item “Fleece Performance Fuel Distribution Block Hose Kit 2003-2007 Dodge 5.9L Cummins” is in sale since Sunday, February 21, 2021. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts & Accessories\Air & Fuel Delivery\Fuel Pumps & Sending Units”. The seller is “rudys_performance_parts” and is located in Chapel Hill, North Carolina. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Israel, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Costa rica, Dominican republic, Panama, Trinidad and tobago, Guatemala, El salvador, Honduras, Jamaica, Antigua and barbuda, Aruba, Belize, Dominica, Grenada, Saint kitts and nevis, Saint lucia, Montserrat, Turks and caicos islands, Barbados, Bangladesh, Bermuda, Brunei darussalam, Bolivia, Ecuador, Egypt, French guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Cayman islands, Liechtenstein, Sri lanka, Luxembourg, Monaco, Macao, Martinique, Maldives, Nicaragua, Oman, Peru, Pakistan, Paraguay, Reunion, Viet nam, Uruguay, Russian federation, Indonesia.
  • Country/Region of Manufacture: United States
  • Interchange Part Number: Diesel Truck Trucks Engine Performance Upgrade
  • Manufacturer Part Number: FPE-FFD-RF-HF-KIT-3G
  • Fitment: Used with Fleece Fuel Distribution Block
  • Brand: Fleece Performance
  • Fitment Type: Performance/Custom

Fleece Performance Fuel Distribution Block Hose Kit 2003-2007 Dodge 5.9L Cummins

AMS Performance Polished Air Intake For 2008-2016 Mitsubishi Lancer Evolution X

AMS Performance Polished Air Intake For 2008-2016 Mitsubishi Lancer Evolution X
AMS Performance Polished Air Intake For 2008-2016 Mitsubishi Lancer Evolution X

AMS Performance Polished Air Intake For 2008-2016 Mitsubishi Lancer Evolution X
The AMS EVO X Performance Intake removes clutter and simplifies your engine bay while adding horsepower! The exclusive design improves air flow to the turbocharger, increasing horsepower and performance. We installed the AMS EVO X Performance Intake with an AMS Manual Boost Controller set at the factory 21 psi on our shop car and produced a tremendous 45 awhp over stock! The AMS EVO X Performance Intake is professionally TIG welded in house by our master fabricators using high quality 3 mandrel bent aluminum. A K&N free flowing filter is included along with new 4 ply silicone couplers and hose clamps. Another exclusive feature is the BOV recirculation tube entry angle, which is completely in-line with the air induction path avoiding turbulence and maintaining excellent air flow. Available polished or black wrinkle coated. Stainless Steel hardware included. High flow K&N air filter. 4 ply silicone couplers. Strategically positioned BOV recirculation in-line with the induction path. Available in polished or black wrinkle powder coat finish. Includes intake fan shield. Includes Maf housing and breather bungs. 2008 Mitsubishi Lancer Evolution X. 2010 Mitsubishi Lancer Evolution X. 2014 Mitsubishi Lancer Evolution X. 2015 Mitsubishi Lancer Evolution X. 2016 Mitsubishi Lancer Evolution X. Images are for representation purpose only and may differ depending on application. We value your business and we are not satisfied until you are. Rudy’s Performance Parts ships products from multiple warehouses across the country in order to get your products to you the quickest way possible. We are not able to send ANY race use products to the state of California. According to the EPA Clean Air Act, they are illegal for use on any Federal, State, or Local public highways and illegal use is punishable by the penalties enacted by the mentioned laws. Rudy’s Performance Parts does not condone or promote illegal use of these products. All of our parts and accessories are returnable and refundable. The item in which you are returning MUST be unused, uninstalled, in the original condition, and in the original packaging. If you are returning an item due to an error caused by Rudys Performance Parts or its business partners i. If you are sending an item back, we recommend using a service with tracking and signature confirmation. This product is NOT for sale or use in California. The item “AMS Performance Polished Air Intake For 2008-2016 Mitsubishi Lancer Evolution X” is in sale since Thursday, February 13, 2020. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts & Accessories\Engine Cooling Components\Radiators”. The seller is “rudys_performance_parts” and is located in Chapel Hill, North Carolina. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Costa rica, Panama, Trinidad and tobago, Guatemala, Honduras, Jamaica, Antigua and barbuda, Aruba, Belize, Dominica, Grenada, Saint kitts and nevis, Saint lucia, Montserrat, Turks and caicos islands, Barbados, Bangladesh, Bermuda, Brunei darussalam, Bolivia, Ecuador, Egypt, French guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Cayman islands, Liechtenstein, Sri lanka, Luxembourg, Monaco, Macao, Martinique, Maldives, Nicaragua, Oman, Peru, Pakistan, Paraguay, Reunion, Viet nam, Uruguay, Israel.
  • CA Propostion 65 Message: WARNING: Cancer & Reproductive Harm
  • Country/Region of Manufacture: United States
  • Interchange Part Number: Aesthetically Appealing Looks Good Great Better
  • California Prop 65 Warning: WARNING: Cancer & Reproductive Harm
  • Manufacturer Part Number: AMS.04.08.0002-1
  • Brand: AMS Performance

AMS Performance Polished Air Intake For 2008-2016 Mitsubishi Lancer Evolution X

Fleece Performance Fuel Distribution Block Hose Kit 2010-2018 Dodge 6.7L Cummins

Fleece Performance Fuel Distribution Block Hose Kit 2010-2018 Dodge 6.7L Cummins
Fleece Performance Fuel Distribution Block Hose Kit 2010-2018 Dodge 6.7L Cummins

Fleece Performance Fuel Distribution Block Hose Kit 2010-2018 Dodge 6.7L Cummins
Works With Fleece Fuel Distribution Block. For Dual CP3 Fuel Systems. Includes Hoses & Fittings. We value your business and we are not satisfied until you are. Rudy’s Performance Parts ships products from multiple warehouses across the country in order to get your products to you the quickest way possible. We are not able to send ANY race use products to the state of California. According to the EPA Clean Air Act, they are illegal for use on any Federal, State, or Local public highways and illegal use is punishable by the penalties enacted by the mentioned laws. Rudy’s Performance Parts does not condone or promote illegal use of these products. All of our parts and accessories are returnable and refundable. The item in which you are returning MUST be unused, uninstalled, in the original condition, and in the original packaging. If you are returning an item due to an error caused by Rudys Performance Parts or its business partners i. If you are sending an item back, we recommend using a service with tracking and signature confirmation. This product is NOT for sale or use in California. The item “Fleece Performance Fuel Distribution Block Hose Kit 2010-2018 Dodge 6.7L Cummins” is in sale since Sunday, February 21, 2021. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts & Accessories\Air & Fuel Delivery\Fuel Pumps & Sending Units”. The seller is “rudys_performance_parts” and is located in Chapel Hill, North Carolina. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Israel, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Costa rica, Dominican republic, Panama, Trinidad and tobago, Guatemala, El salvador, Honduras, Jamaica, Antigua and barbuda, Aruba, Belize, Dominica, Grenada, Saint kitts and nevis, Saint lucia, Montserrat, Turks and caicos islands, Barbados, Bangladesh, Bermuda, Brunei darussalam, Bolivia, Ecuador, Egypt, French guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Cayman islands, Liechtenstein, Sri lanka, Luxembourg, Monaco, Macao, Martinique, Maldives, Nicaragua, Oman, Peru, Pakistan, Paraguay, Reunion, Viet nam, Uruguay, Russian federation.
  • Country/Region of Manufacture: United States
  • Interchange Part Number: Diesel Truck Trucks Engine Performance Upgrade
  • Manufacturer Part Number: FPE-FFD-RF-HF-KIT-4G
  • Brand: Fleece Performance
  • Fitment Type: Performance/Custom
  • Fitment: Used with Fleece Fuel Distribution Block

Fleece Performance Fuel Distribution Block Hose Kit 2010-2018 Dodge 6.7L Cummins

AMS Performance Black Air Intake For 2008-2016 Mitsubishi Lancer Evolution X

AMS Performance Black Air Intake For 2008-2016 Mitsubishi Lancer Evolution X

AMS Performance Black Air Intake For 2008-2016 Mitsubishi Lancer Evolution X
The AMS EVO X Performance Intake removes clutter and simplifies your engine bay while adding horsepower! The exclusive design improves air flow to the turbocharger, increasing horsepower and performance. We installed the AMS EVO X Performance Intake with an AMS Manual Boost Controller set at the factory 21 psi on our shop car and produced a tremendous 45 awhp over stock! The AMS EVO X Performance Intake is professionally TIG welded in house by our master fabricators using high quality 3 mandrel bent aluminum. A K&N free flowing filter is included along with new 4 ply silicone couplers and hose clamps. Another exclusive feature is the BOV recirculation tube entry angle, which is completely in-line with the air induction path avoiding turbulence and maintaining excellent air flow. Available polished or black wrinkle coated. Stainless Steel hardware included. High flow K&N air filter. 4 ply silicone couplers. Strategically positioned BOV recirculation in-line with the induction path. Available in polished or black wrinkle powder coat finish. Includes intake fan shield. Includes Maf housing and breather bungs. 2008 Mitsubishi Lancer Evolution X. 2010 Mitsubishi Lancer Evolution X. 2014 Mitsubishi Lancer Evolution X. 2015 Mitsubishi Lancer Evolution X. 2016 Mitsubishi Lancer Evolution X. 2008 Model EVO Xs will not require a tune with the addition of this intake. 2010 and later models will require a ECU tune for safe operation when using this intake pipe. Failing to do so can cause issues or damage to your engine. We value your business and we are not satisfied until you are. Rudy’s Performance Parts ships products from multiple warehouses across the country in order to get your products to you the quickest way possible. We are not able to send ANY race use products to the state of California. According to the EPA Clean Air Act, they are illegal for use on any Federal, State, or Local public highways and illegal use is punishable by the penalties enacted by the mentioned laws. Rudy’s Performance Parts does not condone or promote illegal use of these products. All of our parts and accessories are returnable and refundable. The item in which you are returning MUST be unused, uninstalled, in the original condition, and in the original packaging. If you are returning an item due to an error caused by Rudys Performance Parts or its business partners i. If you are sending an item back, we recommend using a service with tracking and signature confirmation. This product is NOT for sale or use in California. The item “AMS Performance Black Air Intake For 2008-2016 Mitsubishi Lancer Evolution X” is in sale since Thursday, February 13, 2020. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts & Accessories\Engine Cooling Components\Radiators”. The seller is “rudys_performance_parts” and is located in Chapel Hill, North Carolina. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Costa rica, Panama, Trinidad and tobago, Guatemala, Honduras, Jamaica, Antigua and barbuda, Aruba, Belize, Dominica, Grenada, Saint kitts and nevis, Saint lucia, Montserrat, Turks and caicos islands, Barbados, Bangladesh, Bermuda, Brunei darussalam, Bolivia, Ecuador, Egypt, French guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Cayman islands, Liechtenstein, Sri lanka, Luxembourg, Monaco, Macao, Martinique, Maldives, Nicaragua, Oman, Peru, Pakistan, Paraguay, Reunion, Viet nam, Uruguay.
  • Country/Region of Manufacture: United States
  • Interchange Part Number: Aesthetically Appealing Looks Good Great Better
  • California Prop 65 Warning: WARNING: Cancer & Reproductive Harm
  • Manufacturer Part Number: AMS.04.08.0002-2
  • CA Propostion 65 Message: WARNING: Cancer & Reproductive Harm
  • Brand: AMS Performance

AMS Performance Black Air Intake For 2008-2016 Mitsubishi Lancer Evolution X

Fleece Performance Electronically Controlled Exhaust Brake 13-18 Cummins 6.7L

Fleece Performance Electronically Controlled Exhaust Brake 13-18 Cummins 6.7L
Fleece Performance Electronically Controlled Exhaust Brake 13-18 Cummins 6.7L
Fleece Performance Electronically Controlled Exhaust Brake 13-18 Cummins 6.7L
Fleece Performance Electronically Controlled Exhaust Brake 13-18 Cummins 6.7L
Fleece Performance Electronically Controlled Exhaust Brake 13-18 Cummins 6.7L
Fleece Performance Electronically Controlled Exhaust Brake 13-18 Cummins 6.7L
Fleece Performance Electronically Controlled Exhaust Brake 13-18 Cummins 6.7L

Fleece Performance Electronically Controlled Exhaust Brake 13-18 Cummins 6.7L
Fleece Performance Electronically Controlled Exhaust Brake 13-18 Cummins 6.7L. This exhaust brake features a CAN based control systems that completely integrates with the stock exhaust brake controller to provide a smooth calibration-free installation. The actuator in this kit provide instantaneous actuation that allows you to tow heavy loads with more confidence using the OEM dash controls. This Fleece FPE-EXBRK-67-1318 Electronically Actuated Exhaust Brake is manufactured from heavy duty cast iron that is ceramic coated for longevity. The common problems with a traditional exhaust brake – loud air pumps, frozen air supply lines, and difficult installations are now a thing of the past as installation of this kit generally takes about 2 hours. This exhaust brake includes the cast elbow, downpipe, V-band clamps, wiring, cooling lines and fittings you need for installation with 4 different modes for all your towing needs (listed below). Cold-Start/Warm Up Mode: This exhaust brake will accelerate the heating up of the engine to 150 degrees by remaining partial closed at idle. Full-On Mode: This exhaust brake will activate at 0% throttle with no brake input over 10 mph to provide the fastest response time from the exhaust brake. Automatic Mode: This exhaust brake will activate at 0% throttle when the brake pedal is applied over 10 mph. ABS Integration: The exhaust brake will automatically be disengaged when the ABS has been activated. Cooling Lines and Fittings. This product is ONLY designed for use on S400 fixed vane geometry turbo and Fleece Performance 2nd Gen Kit. We value your business and we are not satisfied until you are. Rudy’s Performance Parts ships products from multiple warehouses across the country in order to get your products to you the quickest way possible. We are not able to send ANY race use products to the state of California. According to the EPA Clean Air Act, they are illegal for use on any Federal, State, or Local public highways and illegal use is punishable by the penalties enacted by the mentioned laws. Rudy’s Performance Parts does not condone or promote illegal use of these products. All of our parts and accessories are returnable and refundable. The item in which you are returning MUST be unused, uninstalled, in the original condition, and in the original packaging. If you are returning an item due to an error caused by Rudys Performance Parts or its business partners i. If you are sending an item back, we recommend using a service with tracking and signature confirmation. This product is NOT for sale or use in California. The item “Fleece Performance Electronically Controlled Exhaust Brake 13-18 Cummins 6.7L” is in sale since Sunday, February 21, 2021. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Exhaust\Other”. The seller is “rudys_performance_parts” and is located in Chapel Hill, North Carolina. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Indonesia, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Mexico, New Zealand, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Panama, Jamaica, Barbados, Bangladesh, Bermuda, Brunei darussalam, Bolivia, Ecuador, Egypt, French guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Cayman islands, Liechtenstein, Sri lanka, Luxembourg, Monaco, Macao, Martinique, Maldives, Nicaragua, Oman, Peru, Pakistan, Paraguay, Reunion, Viet nam.
  • Interchange Part Number: Diesel Truck Trucks Engine Performance Upgrade
  • Fitment: S400 and 2nd Gen Kit Turbos Only!
  • Manufacturer Part Number: FPE-EXBRK-67-1318
  • Brand: Fleece
  • Fitment Type: Performance/Custom
  • Warranty: 1 Year

Fleece Performance Electronically Controlled Exhaust Brake 13-18 Cummins 6.7L

Fleece Performance Aluminum Relocation Coolant Tank For 2013-2018 6.7L Cummins

Fleece Performance Aluminum Relocation Coolant Tank For 2013-2018 6.7L Cummins
Fleece Performance Aluminum Relocation Coolant Tank For 2013-2018 6.7L Cummins
Fleece Performance Aluminum Relocation Coolant Tank For 2013-2018 6.7L Cummins
Fleece Performance Aluminum Relocation Coolant Tank For 2013-2018 6.7L Cummins
Fleece Performance Aluminum Relocation Coolant Tank For 2013-2018 6.7L Cummins

Fleece Performance Aluminum Relocation Coolant Tank For 2013-2018 6.7L Cummins
The Fleece Coolant Tank eliminates the factory coolant tank and changes the location next to the battery box. This includes the components needed for installation and features an integrated coolant level sensors for code-free operation. Changes Coolant Tank Location. Aluminum coolant tank construction. All mounting hardware included. This product is ONLY designed For Use With 2nd Gen Swap & Compound turbos only! We value your business and we are not satisfied until you are. Rudy’s Performance Parts ships products from multiple warehouses across the country in order to get your products to you the quickest way possible. We are not able to send ANY race use products to the state of California. According to the EPA Clean Air Act, they are illegal for use on any Federal, State, or Local public highways and illegal use is punishable by the penalties enacted by the mentioned laws. Rudy’s Performance Parts does not condone or promote illegal use of these products. All of our parts and accessories are returnable and refundable. The item in which you are returning MUST be unused, uninstalled, in the original condition, and in the original packaging. If you are returning an item due to an error caused by Rudys Performance Parts or its business partners i. If you are sending an item back, we recommend using a service with tracking and signature confirmation. This product is NOT for sale or use in California. The item “Fleece Performance Aluminum Relocation Coolant Tank For 2013-2018 6.7L Cummins” is in sale since Thursday, August 10, 2017. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Cooling Systems\Radiators & Parts”. The seller is “rudys_performance_parts” and is located in United States. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Israel, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi arabia, Ukraine, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Costa rica, Panama, Trinidad and tobago, Guatemala, Honduras, Jamaica, Antigua and barbuda, Aruba, Belize, Dominica, Grenada, Saint kitts and nevis, Saint lucia, Montserrat, Turks and caicos islands, Barbados, Bangladesh, Bermuda, Brunei darussalam, Bolivia, Ecuador, Egypt, French guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Cayman islands, Liechtenstein, Sri lanka, Luxembourg, Monaco, Macao, Martinique, Maldives, Nicaragua, Oman, Peru, Pakistan, Paraguay, Reunion, Viet nam, Uruguay.
  • Interchange Part Number: 13 14 15 16 17 2013 2014 2015 2016 2017 6.7 6.7L
  • Material: Aluminum
  • California Prop 65 Warning: WARNING: Cancer & Reproductive Harm
  • Type: Coolant Bottle
  • Manufacturer Part Number: FPE-34235
  • CA Propostion 65 Message: WARNING: Cancer & Reproductive Harm
  • Fitment: For use with 2nd Gen Swap and Compound Turbos.
  • Brand: Fleece Performance
  • Fitment Type: Performance/Custom

Fleece Performance Aluminum Relocation Coolant Tank For 2013-2018 6.7L Cummins

Fits 7.3L 99.5-03 Ford Powerstroke Performance Exhaust Housing & Turbo Pedestal

Fits 7.3L 99.5-03 Ford Powerstroke Performance Exhaust Housing & Turbo Pedestal
Fits 7.3L 99.5-03 Ford Powerstroke Performance Exhaust Housing & Turbo Pedestal

Fits 7.3L 99.5-03 Ford Powerstroke Performance Exhaust Housing & Turbo Pedestal
Fits 7.3L 99.5-03 Ford Powerstroke Performance Exhaust Housing & Turbo Pedestal. Rudy’s Turbo Pedestal And Exhaust Housing 1999.5-2003 Ford 7.3L F250 F350 Diesel. Hi-Flow Performance Turbo Pedestal & Exhaust Housing – No EBP Valve. Includes Bolts & O-Rings. This pedestal does NOT have the EBP valve control. Vehicles built before 12/7/98 are considered early’99 and vehicles built after 12/7/98 are considered late’99. You can also contact Ford with your VIN to verify the build date on your truck to be 100%. 1999.5-2003 Ford 7.3L Powerstroke Diesel. We value your business and we are not satisfied until you are. Rudy’s Performance Parts ships products from multiple warehouses across the country in order to get your products to you the quickest way possible. We are not able to send ANY race use products to the state of California. According to the EPA Clean Air Act, they are illegal for use on any Federal, State, or Local public highways and illegal use is punishable by the penalties enacted by the mentioned laws. Rudy’s Performance Parts does not condone or promote illegal use of these products. All of our parts and accessories are returnable and refundable. The item in which you are returning MUST be unused, uninstalled, in the original condition, and in the original packaging. If you are returning an item due to an error caused by Rudys Performance Parts or its business partners i. If you are sending an item back, we recommend using a service with tracking and signature confirmation. This product is NOT for sale or use in California. The item “Fits 7.3L 99.5-03 Ford Powerstroke Performance Exhaust Housing & Turbo Pedestal” is in sale since Saturday, December 1, 2018. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Turbos, Nitrous, Superchargers\Turbo Chargers & Parts”. The seller is “rudys_performance_parts” and is located in Chapel Hill, North Carolina. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Israel, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi arabia, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Costa rica, Dominican republic, Panama, Antigua and barbuda, Aruba, Belize, Dominica, Grenada, Saint kitts and nevis, Saint lucia, Montserrat, Turks and caicos islands, Barbados, Bangladesh, Bermuda, Brunei darussalam, Bolivia, Ecuador, Egypt, French guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Cayman islands, Liechtenstein, Sri lanka, Luxembourg, Monaco, Macao, Martinique, Maldives, Nicaragua, Oman, Peru, Pakistan, Paraguay, Reunion, Viet nam, Uruguay, Russian federation.
  • Interchange Part Number: EBV Valve Hi-Flow High Flow Turbocharger
  • Manufacturer Part Number: DP0114
  • Brand: Rudy’s
  • Fitment Type: Performance/Custom
  • Warranty: 1 Year

Fits 7.3L 99.5-03 Ford Powerstroke Performance Exhaust Housing & Turbo Pedestal

AMS Performance Polished Lower Intercooler Pipe For 08-16 Mitsubishi Lancer

AMS Performance Polished Lower Intercooler Pipe For 08-16 Mitsubishi Lancer

AMS Performance Polished Lower Intercooler Pipe For 08-16 Mitsubishi Lancer
AMS Performance Polished Lower Intercooler Pipe For 08-16 Mitsubishi Lancer. The AMS EVO X Lower Intercooler Pipe (LICP) is a direct replacement for your factory lower intercooler pipe and is made from lightweight 2.5 mandrel bent aluminum tubing. The pipe ends are bead rolled and the assembly is mounted to the core support (in the factory location) to help prevent couplers from popping off under boost. All the factory couplers are replaced with quality 4-ply silicon pieces which can endure 50 + psi of boost! Our LICP is professionally TIG welded in house and is available polished or black wrinkle powder coated. Bead rolled pipe ends. Factory style core support strap. 4 Ply silicon couplers and new hose clamps. Aluminum mandrel bent piping. 2008 Mitsubishi Lancer Evolution X. 2010 Mitsubishi Lancer Evolution X. 2014 Mitsubishi Lancer Evolution X. 2015 Mitsubishi Lancer Evolution X. 2016 Mitsubishi Lancer Evolution X. Images are for representation purpose only and may differ depending on application. We value your business and we are not satisfied until you are. Rudy’s Performance Parts ships products from multiple warehouses across the country in order to get your products to you the quickest way possible. We are not able to send ANY race use products to the state of California. According to the EPA Clean Air Act, they are illegal for use on any Federal, State, or Local public highways and illegal use is punishable by the penalties enacted by the mentioned laws. Rudy’s Performance Parts does not condone or promote illegal use of these products. All of our parts and accessories are returnable and refundable. The item in which you are returning MUST be unused, uninstalled, in the original condition, and in the original packaging. If you are returning an item due to an error caused by Rudys Performance Parts or its business partners i. If you are sending an item back, we recommend using a service with tracking and signature confirmation. This product is NOT for sale or use in California. The item “AMS Performance Polished Lower Intercooler Pipe For 08-16 Mitsubishi Lancer” is in sale since Thursday, February 13, 2020. This item is in the category “eBay Motors\Parts & Accessories\Car & Truck Parts\Cooling Systems\Radiators & Parts”. The seller is “rudys_performance_parts” and is located in Chapel Hill, North Carolina. This item can be shipped to United States, Canada, United Kingdom, Denmark, Romania, Slovakia, Bulgaria, Czech republic, Finland, Hungary, Latvia, Lithuania, Malta, Estonia, Australia, Greece, Portugal, Cyprus, Slovenia, Japan, China, Sweden, South Korea, Indonesia, Taiwan, South africa, Thailand, Belgium, France, Hong Kong, Ireland, Netherlands, Poland, Spain, Italy, Germany, Austria, Bahamas, Mexico, New Zealand, Philippines, Singapore, Switzerland, Norway, Saudi arabia, United arab emirates, Qatar, Kuwait, Bahrain, Croatia, Malaysia, Brazil, Chile, Colombia, Costa rica, Panama, Trinidad and tobago, Guatemala, Honduras, Jamaica, Antigua and barbuda, Aruba, Belize, Dominica, Grenada, Saint kitts and nevis, Saint lucia, Montserrat, Turks and caicos islands, Barbados, Bangladesh, Bermuda, Brunei darussalam, Bolivia, Ecuador, Egypt, French guiana, Guernsey, Gibraltar, Guadeloupe, Iceland, Jersey, Jordan, Cambodia, Cayman islands, Liechtenstein, Sri lanka, Luxembourg, Monaco, Macao, Martinique, Maldives, Nicaragua, Oman, Peru, Pakistan, Paraguay, Reunion, Viet nam, Uruguay.
  • CA Propostion 65 Message: WARNING: Cancer & Reproductive Harm
  • Country/Region of Manufacture: United States
  • Interchange Part Number: Aesthetically Appealing Looks Good Great Better
  • California Prop 65 Warning: WARNING: Cancer & Reproductive Harm
  • Manufacturer Part Number: AMS.04.09.0003-1
  • Brand: AMS Performance

AMS Performance Polished Lower Intercooler Pipe For 08-16 Mitsubishi Lancer