What’s In The Package. 1 X SMACO High Pressure Electric Air Pump.
SMACO 1800W High Pressure Generation Electric Air Pump for Diving Tank 220V/50HZ
What’s In The Package. 1 X SMACO High Pressure Electric Air Pump.
smaco
What’s In The Package. 1 X SMACO High Pressure Electric Air Pump.
SMACO 1800W 220V/50HZ High Pressure Generation Electric Air Pump for Diving Tank
What’s In The Package. 1 X SMACO High Pressure Electric Air Pump.
SMACO PCP Air Compressor 4500Psi/30Mpa High Pressure Paintball Scuba Tank
New in box air compressor.
Smaco Portable High Pressure Air Pump Review Awesome Little Compressor
4500psi Air Hand Pump High Pressure for Smaco Scuba Diving Oxygen Cylinder Tank
HIGH PRESSURE WITH SAFETY. High pressure goes up to 4500psi; copper female connector sealed by polyfluorene ensures leak-free performance; 21.7 flexible micro-bore hose can bear up to 63MPA pressure, safeguarding your safety with superior quality. DURABLE WITH SMOOTH MOTION. Sleek stainless steel construction brings smooth upward and downwards motion; 8mm copper female quick connector allows this pump to withstand over 10,000 times of tear and wear. Comes with oil and water separator for convenient operation; TPR padded grips for fatigue-free hand feelings, large gauge provides easy-to-read parameters. COMPACT & FOLDABLE FOR EASY STORAGE. 5mm foldable pedal for easy storage and transport, perfect to carry it around in your vehicle for unexpected use. Precisely shows the pressure with no air leaking, you can know when to stop inflating. Use top-grade material, anti-crack, low temperature is not easy to crisp. Tighten the pressure relief screw before inflating air (clockwise). Loosen the pressure relief screw to release the air after inflation completed. Make sure the tightness before using it. Make sure the high tightness between the connector and the air tank to avoid leaking. (Refer to the manual). Connect the high-pressure pump to the scuba tank. Close the pressure relief valve. Start to inflate and stop inflating when the air pressure reaches to 3000 psi or 200 bar. Open the pressure relief valve to relieve pressure. Pull out the scuba tank, and the inflation is completed. Net weight: about 2.5KG/5.51 Pounds. 61.5cm/24.21 inch. 25.6cm/10.08 inch. Air tube range: approx. Separator (L x W): approx. 9 x 3.1cm/3.54 x 1.22 inch. 1 Set of Accessories. We highly recommend inflating your air tank by air compressor machine, the air pump just for emergency use. Welcome to our store! If you encounter any trouble. Please give us a chance to solve any problems and we will try our best to serve you. Your satisfaction is utmost important to us; we pledge to do everything possible to gain your trust and approval. If you were not satisfied when you have received the item(s), please return it/them. If you are willing return item back to us, please keep it in original package. We value your feedback so we will endeavor to respond to all inquiries. & Public holiday excluded. We hope to get your. Good feedback and 5 stars. The item “4500psi Air Hand Pump High Pressure for Smaco Scuba Diving Oxygen Cylinder Tank” is in sale since Tuesday, October 13, 2020. This item is in the category “Sporting Goods\Water Sports\Scuba & Snorkeling\Tanks”. The seller is “sunlight_yp” and is located in ShenZhen. This item can be shipped to United States, all countries in continental Asia, Canada, Mexico.
- Air tube range: approx. 53cm/20.87 inch
- Brand: Unbranded
- Bundle Description: Hand Pump + Accessories
- Connector: 8mm Female Quick Connector
- Custom Bundle: No
- Display: Pressure Gauge
- Efficiency: 6-7 min (0.5L Tank)
- Handle length: approx. 25.6cm/10.08 inch
- Hose length: approx. 62cm/24.41 inch
- Material: Stainless Steel
- Measuring Range: 0-40MPA
- Modified Item: No
- MPN: Does Not Apply
- Net weight: about 2.5KG/5.51 Pounds
- Pressure Grade: 4500psi
- Separator (L x W): approx. 9 x 3.1cm/3.54 x 1.22 inch
- Total length: approx. 61.5cm/24.21 inch
SMACO Manual High Pressure Air Pump Portable Mini Inflator with Pressure Gauge
SMACO Scuba Diving Reserve Air Tank Hand Pump Oxygen Tank Mini Operated Pump SP. Made of high quality stainless steel, anti-rust and durable. High pressure air pump by hand, 53cm/20.9in length air pump tube. With a pressure gauge on it, you can know when to stop inflating. Portable and practical, essential accessory for diving. Color: Shown as pictures. Air Tube Length: Approx. 53cm / 20.9in. Connector Diameter: 3.1cm / 1.2in. Connector Length: 9cm / 3.5in. 1 High Pressure Air Pump (with Connector and Air Tube). 1 Wrench(Size: 14.8 5 0.25cm / 5.8 2.0 0.1in). 2 Packages of Accessories. High-pressure air pump, in the process of air inflating due to up and down friction, resulting in fever, this phenomenon is normal. The phenomenon of oxygen cylinder respirator can’t be inflated: firstly, when oxygen cylinder respirator is delivered, it does not contain gas, secondly, check the high-pressure pump before inflating the high-pressure pump, assemble it according to the instructions, install the gasket rubber ring, tighten the exhaust valve, and then inflate it. This product is different from oxygen pumps such as basketball, volleyball. Effectively, please be patient to inflating for two or three minutes before the pressure gauge will change. It takes three men to inflating about 16 minutes for each oxygen cylinder to fill up. Within 3000PSI, it is within the normal range. Over 3000PSI may burst (please don’t inflating too full). Oxygen cylinder head and body should be checked for tightness, good connection and not standing above the oxygen cylinder when inflating. Be careful not to inflate the oxygen cylinder to a certain pressure. Oxygen has certain impact. Please pay attention to safety. When the pump is finished, please notice that it is dangerous to twist the exhaust valve of the high-pressure pump and suddenly pull out the connecting port between the pump and the oxygen cylinder. Instead of leaving negative/neutral feedback or opening a dispute. Our listing price includes the value of goods, packaging cost, and export. Please check with your country’s. We will reply your message within 48 hours. If you do not receive our reply within 48 hours, pls. Post a message again because sometimes our message system may block some emails. If you are satisfied with our service, pls. Our aim is to provide Top Level Customer Service, your recognition will encourage us greatly and serve you better. We strive to keep all our customers satisfy. We will always do our up most to exceed your expectations in customer service, communication and dispatching of your orders. The item “SMACO Manual High Pressure Air Pump Portable Mini Inflator with Pressure Gauge” is in sale since Monday, January 14, 2019. This item is in the category “Sporting Goods\Water Sports\SCUBA & Snorkeling\Tanks”. The seller is “storeshopping2014″ and is located in Hongkong. This item can be shipped worldwide.
- Brand: Unbranded
- MPN: Does Not Apply
SMACO Oxygen Cylinder High Pressure Air Pump Scuba Tank Set Diving Equipment
Oxygen Cylinder High Pressure Air Pump Scuba Tank Set Diving Breathe Underwater. Adopt aviation aluminum, standard portable oxygen tank parameters manufacturing, and meet the manufacturing standards of diving equipment. Hold down the top to relieve pressure inside the bottle. With a pressure gauge, showing how much air there is. Silicone mouth pieces, safe and fit mouth shape, adopt ergonomic design. With the oxygen cylinder, you can breathe about 57 mouths of air on the surface and about 21 times for up to 10 minutes underwater. High Pressure Air Pump. Made of high quality stainless steel, anti-rust and durable. High pressure air pump by hand, 53cm/20.9in. Length air pump tube. With a pressure gauge on it, you can know when to stop inflating. Portable and practical, essential accessory for diving. Oxygen Cylinder Material: Aviation Aluminum + Silicone. High Pressure Air Pump Material: Stainless Steel. Color: Shown as pictures. Oxygen Cylinder Capacity: 0.5L. Oxygen Cylinder Gas Capacity: 3.0 CU FT/85 LITERS. Oxygen Cylinder Maximum Pressure: 3000 PSI/200 BAR/20MPA. Oxygen Cylinder Size: 6 35.2 13cm / 2.36 13.86 5.12inch. Air Tube Length: Approx. 53cm / 20.9. Connector Diameter: 3.1cm / 1.2in. Connector Length: 9cm / 3.5in. 13.5 6.2 2cm / 5.31 2.44 0.79in. Silicone Diving Glasses Size: Approx. 16.5 10.5 6.5cm / 6.50 4.13 2.56in. Storage Box Size: Approx. 67 32 7.5cm / 26.4 12.6 3in. 1 Portable Oxygen Cylinder. 1 Scuba Tank Refill Adapter. 1 High Pressure Air Pump (With Accessories). 1 Wrench Size: 14.8 5 0.25cm / 5.8 2.0 0.1in. 3 Packages of Accessories. 3 Packages of Accessories Including: 5 White Cylinder Sponge(diameter 2.2cm, Height 1 cm), 5 White Cylinder Sponge(1.1 cm diameter, 2cm Height), 1 Black Rubber Gasket(2.5 cm diameter), 1 Black Rubber Gasket(2.6cm diameter), 1 Black Rubber Gasket(2.1 diameter), 2 Screws(3 cm length), 2 Spring, 2 Black Rubber Gasket(0.9 dia), 1 Black Rubber Gasket(0.8 cm diameter), 2 Black Rubber Gasket(0.7 diameter), 1 Black Particle(0.5 cm diameter), 1 Small Hoop(0.6 cm diameter), 1 Test Plug, 1 Auto Connector, 1 Green Rubber Gasket (2.2cm dia), 2 Hexagonal Screwdriver. High pressure pump, in the process of blowing up and down friction, resulting in heat, this phenomenon is normal. How to Solve the oxygen cylinder respirator does not take in air: First of all, oxygen bottle respirator is delivered without gas, Secondly, check the high pressure pump before pumping air, assemble according to the instructions, check if the gasket is installed, whether the relief valve is tightened etc. Then, pump up the product. It is different from basketball, volleyball and other oxygen pump, which only need inflate once is fine. Please be patient for two or three minutes, pressure gauge will have changes(notice this is one a physical job to lose weight). It takes about 16 minutes for each of the three men to fill up, Within 3000PSI is the normal range, above 3000PSI could explode. Please don’t overfill it. Please check the head and body of oxygen cylinder for tightness, connect, Do not stand over the oxygen bottle while pumping, note that the oxygen cylinder is pressurized to a certain extent and has a certain impact force. Please pay attention to safety. Please note that the after complete the inflation, twist open the high pressure pump release valve, It is dangerous to suddenly open the link between the pump and the oxygen cylinder. Instead of leaving negative/neutral feedback or opening a dispute. Our listing price includes the value of goods, packaging cost, and export. Please check with your country’s. We will reply your message within 48 hours. If you do not receive our reply within 48 hours, pls. Post a message again because sometimes our message system may block some emails. If you are satisfied with our service, pls. Our aim is to provide Top Level Customer Service, your recognition will encourage us greatly and serve you better. We strive to keep all our customers satisfy. We will always do our up most to exceed your expectations in customer service, communication and dispatching of your orders. The item “SMACO Oxygen Cylinder High Pressure Air Pump Scuba Tank Set Diving Equipment” is in sale since Wednesday, June 19, 2019. This item is in the category “Sporting Goods\SCUBA & Snorkelling\Cylinders & Tanks”. The seller is “netdaily_best” and is located in Hongkong. This item can be shipped worldwide.
- Air Pump Material: Stainless Steel
- Brand: Unbranded
- Capacity: 0.5L
- MPN: Does Not Apply
- Oxygen Cylinder Material: Aviation Aluminum + Silicone