LCD Rubber inflatable boat high pressure electric air pump 80KPA 12V DC GP80D. Output pressure can be set 2. Automatically stop when pressure is reached 3. Fast inflation, save time 4. Inflation pressure error, safe use 5. Output pressure range, suitable for a variety of inflatable products 6. Inflate/deflate two modes with one key switch 7. Light-weight & Compact Design 8. Easy to use – just plug into your 12V battery for power. MODEL:GP-80D Max input air:500L/min Max air pressure:80Kpa Min air pressure: 8Kpa Pressure adjustment: 1Kpa/grade Air intake pipe diameter:20.5mm Air intake pipe length:1.8m Wire Length: 3m Battery connector:Battery clip Noise Level(7m): 67dB Weight: 3kg. Ensure reliable gas path links found leaks should be immediately shut down; otherwise it will damage the pump; 2. Do not sand, dust or debris into the air inlet; 3. Do not continue to use the air pump over 60 minutes, before cooling air pump, do not re-use; 4. Use the pump, make sure the battery away from the fuel tank, prohibition of reach of children; 5. Before use, you must check the pressure setting, do not make inflatable balloon filled with high pressure air. Cigarette lighters cannot withstand current 20A please directly connected to the car battery or self-made electric car battery 7. If you give inflatable rubber boats, set pressure is adjusted in scale 25 (or the corresponding pressure value), and the pneumatic pressure of the keel 30, if a drawing floor inflatable pressure was adjusted at 50. This product is a high pressure Pump set incorrectly can cause fatal worns. Please note that when wiring polarity, red is positive. Automatic electric pump uses a 12V DC power supply 20A maximum Current generally 20A car cigarette lighter can not withstand the current or directly connected to the car battery self-made electric car battery Please inflatable must be high before the whole good inflation pressure can be set by a black dial. If you give the inflatable rubber boats, set pressure adjustment in the scale 25 (or the corresponding pressure value), and The inflation pressure of the keel 35 If you give the inflatable inflatable drawing floor 60. The pressure in the pressure adjustment set incorrectly can cause fatal damage to the rubber boats. Automatic inflatable inflatable pump can also be pumped down a notch interface for pumping Interface Please note that the positive and negative wiring, the red is positive Automatic inflatable air pump principle is: first to inflatable boat (inflatable floor) inflated to 80% (no pressure) fan, then filled with live match Inflatable end, air pump will automatically stop working. Pull the inflatable pull mouth continue to the next inflatable chamber. 1 x set of LCD Inflatable Pump GP80D.

Output pressure can be set 2. Automatically stop when pressure is reached 3. Fast inflation, save time 4. Inflation pressure error, safe use 5. Output pressure range, suitable for a variety of inflatable products 6. Inflate/deflate two modes with one key switch 7. Light-weight & Compact Design 8. Easy to use – just plug into your 12V battery for power Specification: MODEL:GP-80D Max input air:500L/min Air pressure:10Kpa80Kpa Power:240W Pressure adjustment: 1Kpa/grade Air intake pipe diameter:20.5mm Air intake pipe length:1.8m Wire Length: 3m Battery connector:Battery clip Size:222227cm Noise Level(7m): 67dB Weight: 2.8kg Note: 1. Ensure reliable gas path links found leaks should be immediately shut down; otherwise it will damage the pump; 2. Do not sand, dust or debris into the air inlet; 3. Do not continue to use the air pump over 60 minutes, before cooling air pump, do not re-use; 4. Use the pump, make sure the battery away from the fuel tank, prohibition of reach of children; 5. Before use, you must check the pressure setting, do not make inflatable balloon filled with high pressure air. Cigarette lighters cannot withstand current 20A please directly connected to the car battery or self-made electric car battery 7. If you give inflatable rubber boats, set pressure is adjusted in scale 25 (or the corresponding pressure value), and the pneumatic pressure of the keel 30, if a drawing floor inflatable pressure was adjusted at 50. This product is a high pressure Pump set incorrectly can cause fatal worns. Please note that when wiring polarity, red is positive Use manual: Automatic electric pump uses a 12V DC power supply 20A maximum Current generally 20A car cigarette lighter can not withstand the current or directly connected to the car battery self-made electric car battery Please inflatable must be high before the whole good inflation pressure can be set by a black dial. If you give the inflatable rubber boats, set pressure adjustment in the scale 25 (or the corresponding pressure value), and The inflation pressure of the keel 35 If you give the inflatable inflatable drawing floor 60. The pressure in the pressure adjustment set incorrectly can cause fatal damage to the rubber boats. Automatic inflatable inflatable pump can also be pumped down a notch interface for pumping Interface Please note that the positive and negative wiring, the red is positive Automatic inflatable air pump principle is: first to inflatable boat (inflatable floor) inflated to 80% (no pressure) fan, then filled with live match Inflatable end, air pump will automatically stop working. Pull the inflatable pull mouth continue to the next inflatable chamber. Package Include: 1 x set of LCD Inflatable Pump GP80D. It is charged by the custom of your country. This item is in the category “Sporting Goods\Water Sports\Kayaking, Canoeing & Rafting\Accessories”. The seller is “htg-electronic” and is located in this country: CN. This item can be shipped worldwide.

• Brand: Unbranded
• UPC: 919986614241